Flooding is extremely dangerous when a river overflows to inundate an urban area. From 1995 to 2016, North Korea (NK) experienced extensive damage to life and property almost every year due to a levee breach resulting from typhoons and heavy rainfall during the summer monsoon season. Recently, Hoeryeong City (2016) experienced heavy rain during Typhoon Lionrock, and the resulting flood killed and injured many people (68,900) and destroyed numerous buildings and settlements (11,600). The NK state media described it as the most significant national disaster since 1945. Thus, almost all annual repeat occurrences of floods in NK have had a severe impact, which makes it necessary to figure out the extent of floods to restore the damaged environment. However, this is difficult due to inaccessibility. Under such a situation, optical remote sensing (RS) data and radar RS data along with a logistic regression were utilized in this study to develop modeling for flood-damaged area delineation. High-resolution web-based satellite imagery was also interpreted to confirm the results of the study.

Remote sensing (RS) has been used to monitor inaccessible regions. It is considered a useful technique for deriving important environmental information from inaccessible regions, especially North Korea. In this study, we aim to develop a tree species classification model based on RS and machine learning techniques, which can be utilized for classification in North Korea. Two study sites were chosen, the Korea National Arboretum (KNA) in South Korea and Mt. Baekdu (MTB; a.k.a., Mt. Changbai in Chinese) in China, located in the border area between North Korea and China, and tree species classifications were examined in both regions. As a preliminary step in developing a classification algorithm that can be applied in North Korea, common coniferous species at both study sites, Korean pine (Pinus koraiensis) and Japanese larch (Larix kaempferi), were chosen as targets for investigation. Hyperion data have been used for tree species classification due to the abundant spectral information acquired from across more than 200 spectral bands (i.e., hyperspectral satellite data). However, it is impossible to acquire recent Hyperion data because the satellite ceased operation in 2017. Recently, Sentinel-2 satellite multispectral imagery has been used in tree species classification. Thus, it is necessary to compare these two kinds of satellite data to determine the possibility of reliably classifying species. Therefore, Hyperion and Sentinel-2 data were employed, along with machine learning techniques, such as random forests (RFs) and support vector machines (SVMs), to classify tree species. Three questions were answered, showing that: (1) RF and SVM are well established in the hyperspectral imagery for tree species classification, (2) Sentinel-2 data can be used to classify tree species with RF and SVM algorithms instead of Hyperion data, and (3) training data that were built in the KNA cannot be used for the tree classification of MTB. Random forests and SVMs showed overall accuracies of 0.60 and 0.51 and kappa values of 0.20 and 0.00, respectively. Moreover, combined training data from the KNA and MTB showed high classification accuracies in both regions; RF and SVM values exhibited accuracies of 0.99 and 0.97 and kappa values of 0.98 and 0.95, respectively.

The most recent forest-type map of the Korean Peninsula was produced in 1910. That of South Korea alone was produced since 1972; however, the forest type information of North Korea, which is an inaccessible region, is not known due to the separation after the Korean War. In this study, we developed a model to classify the five dominant tree species in North Korea (Korean red pine, Korean pine, Japanese larch, needle fir, and Oak) using satellite data and machine-learning techniques. The model was applied to the Gwangneung Forest area in South Korea; the Mt. Baekdu area of China, which borders North Korea; and to Goseong-gun, at the border of South Korea and North Korea, to evaluate the model’s applicability to North Korea. Eighty-three percent accuracy was achieved in the classification of the Gwangneung Forest area. In classifying forest types in the Mt. Baekdu area and Goseong-gun, even higher accuracies of 91% and 90% were achieved, respectively. These results confirm the model’s regional applicability. To expand the model for application to North Korea, a new model was developed by integrating training data from the three study areas. The integrated model’s classification of forest types in Goseong-gun (South Korea) was relatively accurate (80%); thus, the model was utilized to produce a map of the predicted dominant tree species in Goseong-gun (North Korea).

Leaf area index is a key structural parameter for biological and physical processes. Korea is planning to launch CAS500-4 in 2025, so in situ data is needed to validate the leaf area index. Unlike other networks (e.g., NEON and TERN), establishing an elementary sampling unit is difficult in Korea due to the complex forest structure and rugged terrain. Therefore, pixel-level correspondence between the satellite product and fisheye footprints is the best way to verify in complex terrain. In this study, we analyzed the spatial footprint of fisheye lenses in different forest types using terrestrial LiDAR data for the first time. The three-dimensional forest structure was analyzed at various viewing zenith angles, and the footprint radius was approximately 3 m at view zenith angle (VZA) 20° and approximately 10 m at VZA 90°. We also analyzed the Z-values from terrestrial laser data and the plant area index on leafless seasons to assess the impact of obstacles, such as tree trunks, under various viewing zenith angles. The analysis showed that the influence of woody components increases dramatically as the VZA exceeds 40°. Such factors influenced the increase in LAI and the decrease in the clumping index as the VZA increased. Overall, we concluded that narrowing VZA between 20° and 40° is appropriate for Korean forests with complex structures.

The bidirectional reflectance distribution function (BRDF) is important for estimating the physical properties of a surface in remote sensing. In the laboratory, the BRDF can be estimated quickly and accurately using a goniometer, but it is very difficult to operate in the field. The purpose of this study was to evaluate whether estimating the BRDF with reasonable accuracy using an unmanned aerial vehicle (UAV) with a multispectral camera is possible in the field. Hemispherical reflectance was created from images taken using an UAV multispectral camera. The ground targets were four calibrated reference tarps (CRTs) of different reflectance, and the UAV was operated five times. Down-welling irradiance for reflectance calculation was measured in two ways: a sunlight sensor was mounted on a UAV, and a spectroradiometer with a remote cosine receptor (RCR) was installed on the ground. The BRDF was assessed through the anisotropy factor (ANIF) of the CRT reflectance derived from the collected data. As a result, the irradiance data for the reflectance calculation were more effective from the spectroradiometer with RCR on the ground than from the sunlight sensor mounted on an UAV. Furthermore, the high reflectance CRTs, ANIF, and BRDF had similar results. Therefore, when analyzing the BRDF, the effectiveness can be guaranteed when the reflectance of the target is over 21~46%, because a low reflectance tendency differs due to the adjacency effect. In addition, weather affects irradiance, so it is more effective to conduct fieldwork in clear weather.