Autonomous driving in public roads requires precise localization within the range of few centimeters. Even the best current precise localization system based on the Global Navigation Satellite System (GNSS) can not always reach this level of precision, especially in an urban environment, where the signal is disturbed by surrounding buildings and artifacts. Laser range finder and stereo vision have been successfully used for obstacle detection, mapping and localization to solve the autonomous driving problem. Unfortunately, Light Detection and Ranging (LIDARs) are very expensive sensors and stereo vision requires powerful dedicated hardware to process the cameras information. In this context, this article presents a low-cost architecture of sensors and data fusion algorithm capable of autonomous driving in narrow two-way roads. Our approach exploits a combination of a short-range visual lane marking detector and a dead reckoning system to build a long and precise perception of the lane markings in the vehicle’s backwards. This information is used to localize the vehicle in a map, that also contains the reference trajectory for autonomous driving. Experimental results show the successful application of the proposed system on a real autonomous driving situation.
This paper describes an intelligent space, whose objective is to localize and control robots or robotic wheelchairs to help people. Such an intelligent space has 11 cameras distributed in two laboratories and a corridor. The cameras are fixed in the environment, and image capturing is done synchronously. The system was programmed as a client/server with TCP/IP connections, and a communication protocol was defined. The client coordinates the activities inside the intelligent space, and the servers provide the information needed for that. Once the cameras are used for localization, they have to be properly calibrated. Therefore, a calibration method for a multi-camera network is also proposed in this paper. A robot is used to move a calibration pattern throughout the field of view of the cameras. Then, the captured images and the robot odometry are used for calibration. As a result, the proposed algorithm provides a solution for multi-camera calibration and robot localization at the same time. The intelligent space and the calibration method were evaluated under different scenarios using computer simulations and real experiments. The results demonstrate the proper functioning of the intelligent space and validate the multi-camera calibration method, which also improves robot localization.
30 April 2013 in Journal of Control, Automation and Electrical Systems
An approach to guide a mobile robot from an initial position to a goal position avoiding any obstacle in its path, when navigating in a semi-structured environment, is proposed in this paper. Such an approach, hereinafter referred to as tangential escape, consists in changing the current robot orientation through a suitable combination of the values of the angular and linear velocities (the control actions) whenever an obstacle is detected close to it. Then, the robot starts navigating in parallel to the tangent to the obstacle, regarding the point of the obstacle boundary the robot sensing system identifies as the closest one. The stability of the control system designed according this approach is proven, showing that the robot reaches any reachable goal, with or without a prescribed final orientation. Such a control system is programmed onboard a mobile platform whose sensing system is a laser scanner which provides 181 range measurements, for experimental validation. The results obtained are presented and discussed, allowing concluding that the tangential escape approach is able to guide the robot along trajectories that result in a reduction of the traveling time, thus saving batteries and reducing the motor wearing