The diaphragm-through connections are some of the most widespread connections between concrete-filled steel tubular columns and steel beams. In this work, five tee-shaped diaphragm-through connections were fabricated so that they comply with the principle of “strong members and weak panel zone.” Low-frequency cyclic loading was applied to the specimens to investigate the panel zone behavior of the connections. Based on the test results, the force transfer mechanism and the effect of different factors on the panel zone shear capacity were analyzed. In addition, different methods of calculating the panel zone shear strength were compared with the experimental data. The results show that the shear capacity of the panel zone of the connection is borne mainly by the steel tube webs and the core concrete. The steel frame composite with steel tube flanges and diaphragms strengthens the plastic deformation ability after yielding. It was found that in the existing computational methods for panel zone shear capacity of the connection, the calculated results are in agreement with the test results for the shear capacity of the steel tube webs, but the predicted values are not consistent with the concrete component capacity.
This article presents the results of experimental, numerical, and theoretical studies into the shear behavior of panel zone of diaphragm-through connections between concrete-filled square steel tubular columns and steel beams. The current design code does not cover the yield and ultimate shear strengths of such connections in China. Five tee-shaped diaphragm-through connections were fabricated and tested that they comply with the principle of “strong members and weak panel zone.” Three-dimensional nonlinear finite element models were developed to study the shear behavior of the panel zone under low-frequency cyclic loading. Based on the test results, the force transfer mechanism and the effect of different factors on the panel zone shear capacity were analyzed. The width and deformation of compression strut of core concrete were taken into account. A simple manual calculation method was also proposed for evaluating the shear strength of panel zone of diaphragm-through connections. Good agreement was found between theoretical and test results for both yield and ultimate shear strengths for connections.
7 April 2018 in Journal of Mechanics of Materials and Structures
This paper examines the mechanical properties of T-shaped diaphragm-through connections between CFST columns and steel beams under monotonic and cyclic loading. A monotonic test and a cyclic test on two same specimens are described. The experimental setup, connection configurations, and material properties are firstly introduced, followed by a detailed account of the results and observations from tests. The failure mode and the ultimate bearing capacity are similar in the two tests, while the connection exhibits larger yield capacity and lower ductility under cyclic loading than monotonic loading. Nonlinear finite element analysis was also employed in this investigation. The predicted results are in good agreement with the experimental ones so that the reliability of finite element analysis is verified. Diaphragmthrough connection and ordinary beam-column connection are simulated and compared through FEM, and failure modes of plastic hinge at beam end and column face yielding are found respectively, which indicates a significant strengthening effect of the diaphragm and the superior mechanical properties of the diaphragm-through connection.