Focusing on the transitional depth offshore area from 50 m to 75 m, types of articulated foundations are proposed for supporting the NREL 5 MW offshore wind turbine. To investigate the dynamic behaviors under various water depths, three articulated foundations were adopted and numerical simulations were conducted in the time domain. An in-house code was chosen to simulate the dynamic response of the articulated offshore wind turbine. The aerodynamic load on rotating blades and the wind pressure load on tower are calculated based on the blade element momentum theory and the empirical formula, respectively. The hydrodynamic load is simulated by 3D potential flow theory. The motions of foundation, the aerodynamic performance of the wind turbine, and the loads on the articulated joint are documented and compared in different cases. According to the simulation, all three articulated offshore wind turbines show great dynamic performance and totally meet the requirement of power generation under the rated operational condition. Moreover, the comparison is based on time histories and spectra among these responses. The result shows that dynamic responses of the shallower one oscillate more severely compared to the other designs.
1 November 2021 in Journal of Building Engineering
This paper examines the mechanical properties of T-shaped diaphragm-through connections between CFST columns and steel beams under monotonic and cyclic loading. A monotonic test and a cyclic test on two same specimens are described. The experimental setup, connection configurations, and material properties are firstly introduced, followed by a detailed account of the results and observations from tests. The failure mode and the ultimate bearing capacity are similar in the two tests, while the connection exhibits larger yield capacity and lower ductility under cyclic loading than monotonic loading. Nonlinear finite element analysis was also employed in this investigation. The predicted results are in good agreement with the experimental ones so that the reliability of finite element analysis is verified. Diaphragmthrough connection and ordinary beam-column connection are simulated and compared through FEM, and failure modes of plastic hinge at beam end and column face yielding are found respectively, which indicates a significant strengthening effect of the diaphragm and the superior mechanical properties of the diaphragm-through connection.