A fundamental extension for a recently introduced numerical scheme for the time-domain solution of Maxwell's equations on tetrahedral meshes is introduced: the algorithm is here shown to be able to handle materials with finite electric resistivity, without losing any of its amenable properties. A theoretic stability analysis, valid for the extended algorithm, is presented for the first time, and a Courant-Friedrich-Lewy sufficient condition on the maximum time step allowed for the scheme to be stable is derived analytically. This result is completely novel for finite-difference time-domain (FDTD)-like approaches on tetrahedral grids. Finally, the accuracy of the extended algorithm is tested with respect to the well-known implicit finite-element method scheme on tetrahedral grids, to the canonical FDTD scheme on Cartesian orthogonal grids, and to a commercial code implementing FDTD with staircasing mitigation techniques.
19 February 2021 in Computer Methods in Applied Mechanics and Engineering
The geometric reinterpretation of the Finite Element Method (FEM) shows that Raviart–Thomas and Nédélec mass matrices map from degrees of freedoms (DoFs) attached to geometric elements of a tetrahedral grid to DoFs attached to the barycentric dual grid. The algebraic inverses of the mass matrices map DoFs attached to the barycentric dual grid back to DoFs attached to the corresponding primal tetrahedral grid, but they are of limited practical use since they are dense. In this paper we present a new geometric construction of sparse inverse mass matrices for arbitrary tetrahedral grids and possibly inhomogeneous and anisotropic materials, debunking the conventional wisdom that the barycentric dual grid prohibits a sparse representation for inverse mass matrices. In particular, we provide a unified framework for the construction of both edge and face mass matrices and their sparse inverses. Such a unifying principle relies on novel geometric reconstruction formulas, from which, according to a well-established design strategy, local mass matrices are constructed as the sum of a consistent and a stabilization part. A major difference with the approaches proposed so far is that the consistent part is defined geometrically and explicitly, that is, without the necessity of computing the inverses of local matrices. This provides a sensible speedup and an easier implementation. We use these new sparse inverse mass matrices to discretize a three-dimensional Poisson problem, providing the comparison between the results obtained by various formulations on a benchmark problem with analytical solution.
Accurate classification of salt marsh vegetation is crucial for coastal wetland monitoring, but fine-grained species discrimination remains difficult, particularly when only limited training data are available for deep learning approaches. To address this challenge, this paper presents a transfer learning-based framework for classifying salt marsh vegetation using UAV multispectral imagery, focusing on a seven-class taxonomy representative of dominant species and water surfaces. Multispectral orthophotos acquired with a MicaSense Dual-Camera system (10 spectral bands) are combined with five vegetation indices to create rich multi-channel inputs. A classification architecture inspired by heterogeneous transfer learning is developed, where a feature-encoding branch compresses the 15-channel input into three channels before processing through a VGG-16 Convolutional Neural Network (CNN), pre-trained on RGB imagery. By leveraging transfer learning from VGG-16, the proposed model achieves high classification accuracy even with limited training data. Performance is compared with traditional machine learning classifiers, namely Support Vector Machines (SVMs) and Random Forest (RF). Results show that the deep learning approach significantly outperforms SVM and RF, achieving an overall accuracy of 98.4% when jointly using spectral bands and vegetation indices. These findings demonstrate the potential of integrating multispectral UAV data and CNN-based classification to support accurate mapping of heterogeneous salt marsh communities for ecological monitoring and coastal management.
This paper focuses on the characterization of radio propagation, and data communication in a marine environment. More specifically, we consider signal propagation when three different sub-gigahertz industrial, scientific, and medical (ISM) bands, i.e., 169 MHz, 434 MHz, and 868 MHz, are used. The main focus of the paper is to evaluate the path loss (PL), i.e., the power loss that a propagation radio wave would experience when communication occurs between a sail boat and a buoy. We describe the measurement results obtained performing three different radio power measurement campaigns, at the three different aforementioned ISM sub-gigahertz bands. We also want to correlate the radio propagation quality with the weather conditions present in the measurement areas. The obtained results show that higher distances are achieved by transmitting at lower frequencies, i.e., 169 MHz, and, on average, the propagation is directly dependent from the dew point index.
We propose a novel technique to estimate the total volume of unknown insulating inclusions in an electrically conducting body from voltage measurements. Unlike conventional Electrical Impedance Tomography (EIT) systems that usually exhibit low spatial resolution and accuracy, the proposed device is composed of a pair of driving electrodes which, supplied with a known sinusoidal voltage, create a current density field inside a region of interest. The electrodes are designed to generate a current density field in the region of interest that is uniform, to a good approximation, when the inclusions are not present. A set of electrodes with a polygonal geometry is used for four-wires resistance measurements. The proposed technique has been tested designing a low cost prototype, where all electrodes are on the bottom of the conducting body, showing good performances. Such a device may be used to monitor the volume of biological cells inside cell culture dishes or the volume of blood clots in micro-channels in lab-on-a-chip biosensors.