The microstructure and morphology of solid-oxide fuel-cell electrodes are very complex but important because they strongly affect the electrical performance of the cell. In this work the high-resolution X-ray nanotomography technique is applied to reconstruct the three-dimensional microstructure of a (La(0.8)Sr(0.2))(0.95)MnO(3) yttria-stabilized zirconia composite cathode. Some key microstructural parameters, such as the porosity, representative elementary volume, connected pore volume and pore phase tortuosity, were obtained based on the three-dimensional reconstruction volume data with a spatial resolution of sub-60 nm. These parameters bear intimate correlation with the efficiency of the electrochemical conversion process, and provide valuable information for optimizing the manufacturing processes and improving the device's reliability.
7 November 2011 in Microscopy Research and Technique
Aiming at the problems of weak background adaptive ability, high dependence on edge features, high computational complexity of some traditional license plate location algorithms, high deployment cost and strong training dependence of location model based on deep learning, this paper proposes a fast license plate location algorithm based on statistical color features. The algorithm uses the HSV color space as the main processing channel, and quantifies the regional color distribution characteristics by constructing the hue histogram and calculating its standard deviation and other statistics, which significantly improves the discrimination and illumination adaptability of the license plate mask in complex background. Compared with the lightweight deep learning models such as “You Only Look Once Version 12 Nano”, this algorithm does not need GPU acceleration and model loading, eliminates the need for data training, significantly reduces the deployment cost and complexity, and can run efficiently on the general computing platform. The experimental results show that compared with the YOLOv12n model, the average processing time of this algorithm is shortened by 30.81% (when YOLOv12n is evaluated with GPU) or 48.42% (when YOLOv12n is evaluated with CPU) at the cost of sacrificing about 5.8% positioning accuracy. The positioning accuracy still reaches 93.7%, demonstrating high processing efficiency and excellent platform adaptability. The algorithm has the advantages of being lightweight, efficient and interpretable, and is especially suitable for intelligent parking lots, edge devices and other scenes sensitive to real time, cost and energy consumption.
A tunable microstrip-to-waveguide transition is proposed for the ground station of emergency satellite communication systems. The proposed transition, consisting of a microstrip, three matched patches, three waveguides, and three metal screws, can not only convert the microstrip’s TEM-dominated mode into the waveguide’s TE mode within the transmitting frequency band, but also possesses the ability to filter out the amplified noise signals within the receiving frequency band around 12.5 GHz. Importantly, by adjusting the screws’ lengths, it is feasible to change the suppression frequency within the receiving frequency band and keep a good match within the transmitting frequency band. The measured results demonstrate that the proposed transition has a return loss of over 10 dB from 14 to 14.5 GHz and an out-of-band suppression of over 20 dB, from 12.25 to 12.7 GHz, with a typical value of −48 dB around 12.55 GHz. This unique feature eliminates the need for additional waveguide filters that prevent the amplified noise signal, thereby contributing to the miniaturization of the ground station.