A miniaturized traveling wave tube (TWT) was studied by proposing a novel metamaterial (MTM) slow wave structure (SWS). The dispersion results show that n = −1 space harmonic of the fundamental mode exhibits the “forward” wave properties, which is the foundation of the MTM-inspired TWT. Meanwhile, the interaction impedance for mode 2 of the novel MTM SWS can be sharply decreased by introducing four blend edges to weaken the corresponding longitudinal electric field. Also, two coaxial couplers are presented to input/output the signals. The transmission results show that the reflection is as low as −15 dB from 2.90 GHz to 3 GHz, which ensures the amplified signal can be effectively outputted. The MTM-inspired TWT exhibits miniaturized superiority for its compact high frequency structure including the MTM SWS and the coaxial couplers. Especially, for the high-frequency structure, the transverse and longitudinal sizes are ~λ/5 and ~3λ, respectively (λ is the free-space wavelength at the operating frequencies). The simulation of the beam wave interaction shows that the proposed MTM-inspired TWT yields output powers of kW levels from 2.90 GHz to 3 GHz, with a gain of 23.5–25.8 dB and electronic efficiency of 14–22% when the beam current is 0.5 A and the beam voltage is 13 kV. The results indicate that the gain per wavelength is as high as 8.5 dB in the operating bands. The simulation results confirm that it is possible to weaken the backward wave oscillation from the higher mode in the miniaturized MTM-inspired TWT.
As a new type of magnetic levitation train with the characteristics of self-stabilization and self-suspension, high-temperature superconducting magnetic levitation has developed to the test line research stage. In order to promote the rapid development of high-temperature superconducting magnetic levitation train engineering, and the main electromagnetic radiation sources are clarified by analyzing their working principles and structures. Then Ansoft Maxwell EM was used to build a 3D magnetic levitation train electromagnetic environment simulation model to simulate and predict the electromagnetic radiation characteristics of the magnetic levitation train system. Finally, a field EMF test was carried out to verify and assess the impact on the EM environment in the system. The results show that the permanent magnet track on the ground and the synchronous linear motor are the primary electromagnetic radiation sources, and the generated fields are mainly low-frequency fields and static magnetic fields. The low-frequency magnetic field inside the train decreases with the increase of frequency and is partially shielded by the carriage; The static magnetic field cannot be weakened by the carriage, and the static magnetic field inside the car decreases with the increase of height. All types of electromagnetic fields are far below the requirements of the relevant electromagnetic environmental standard limits, and have no effect on the electromagnetic radiation safety of the personnel inside the train and the surrounding environment; In considering of the special people who have pacemakers, static magnetic field suppression measures are studied, and the results show that the trains with high magnetic permeability permalloy as the shielding layer at the bottom of the vehicle greatly lower the static magnetic field within the train.
Considering that current voltage transformer models of electrical multiple units (EMUs) are narrow-band models or transformer models, this paper introduces a wide-band model of EMU voltage transformers based on the vector fitting method, circuit synthesis theory and black-box model theory. The admittances of voltage transformers from 30 kHz to 5 MHz are measured by the vector network analyzer, the branch admittances in the pi-type equivalent circuit are calculated according to the equation of a two-port network equivalent circuit. Based on the vector matching method, the rational function formulas of branch admittances are obtained, and the formulas are converted into the circuit models by circuit synthesis theory. The pi-type equivalent circuit model is constructed in the simulation software, and so is the voltage transformer model in the range of 30 kHz–5 MHz. The frequency sweeping method is used to measure the transmission characteristics from direct current (DC)to 30 kHz. The pi-type model is modified according to transmission characteristics, whereby the wide-band model in DC-5 MHz is obtained. Fast pulse experiments are carried out on the voltage transformer, and the actual injected fast pulse voltage is used as the excitation source in the simulation model. The measurement and simulation results on the secondary side of the voltage transformer show that the wide-band model has a high accuracy.
Current circuit simulation research on EMU (Electric Multiple Unit) overvoltage has focused on overvoltage amplitude distribution and the oscillation frequency of the operating main circuit breaker overvoltage. However, when studying the suppression method, the overvoltage amplitude and frequency characteristics must be considered simultaneously, and few studies have reported on the overvoltage frequency distribution. In this paper, a new simulation model of train-operational main breaker overvoltage based on the 3D structure of the EMU body was proposed, which provided guidance for the study of overvoltage suppression in operational main circuit breakers. This model simulated the transient overvoltage characteristics and distribution of the vehicle body when the train operated the main circuit breaker. The simulated results showed that the first vehicle had the highest operating overvoltage amplitude, and the fourth vehicle had the lowest. The overvoltage amplitudes of vehicles 1–4 were all above 1 kV, and the main overvoltage oscillation frequencies of each vehicle were at 0.70 MHz and 1.30 MHz. The accuracy of the distribution characteristics and spectral characteristics of the operating main breaker overvoltage was verified by static tests on trains, and the simulation was considered to be in agreement with the test. Aiming at the problem that there was no universal suppression method for the operating main breaker overvoltage, a general suppression method for the overvoltage on the high-voltage side of the EMU was studied, and an overvoltage suppression device based on a grounding inductor was proposed. The inductance parameter requirements of the suppressor were theoretically analyzed, and the validity of the design of the inductance suppressor was experimentally verified.
Aiming at the problems of weak background adaptive ability, high dependence on edge features, high computational complexity of some traditional license plate location algorithms, high deployment cost and strong training dependence of location model based on deep learning, this paper proposes a fast license plate location algorithm based on statistical color features. The algorithm uses the HSV color space as the main processing channel, and quantifies the regional color distribution characteristics by constructing the hue histogram and calculating its standard deviation and other statistics, which significantly improves the discrimination and illumination adaptability of the license plate mask in complex background. Compared with the lightweight deep learning models such as “You Only Look Once Version 12 Nano”, this algorithm does not need GPU acceleration and model loading, eliminates the need for data training, significantly reduces the deployment cost and complexity, and can run efficiently on the general computing platform. The experimental results show that compared with the YOLOv12n model, the average processing time of this algorithm is shortened by 30.81% (when YOLOv12n is evaluated with GPU) or 48.42% (when YOLOv12n is evaluated with CPU) at the cost of sacrificing about 5.8% positioning accuracy. The positioning accuracy still reaches 93.7%, demonstrating high processing efficiency and excellent platform adaptability. The algorithm has the advantages of being lightweight, efficient and interpretable, and is especially suitable for intelligent parking lots, edge devices and other scenes sensitive to real time, cost and energy consumption.
A miniaturized metamaterial (MTM) bandpass filter (BPF) based on end-fire coaxial coupling is proposed. End-fire coaxial coupling is achieved by using the coaxial cavity to connect with the SubMiniature version A connector. The subwavelength characteristics of the MTM lead to the miniaturization advantages of the filter in transverse dimensions. Moreover, the longitudinal length of the coaxial cavity can be sharply reduced by introducing matched blocks. As a result, the proposed filter has miniaturization merit both in transverse and longitudinal dimensions. The full-wave simulation results further reveal that the MTM BPF exhibits the advantages of low loss, low reflection, and low group delay. Additionally, the fractional bandwidth is approximately 13% when |S11| is less than −15 dB. The MTM BPF might have potential applications to array antennas for easily being expanded to two dimensional arrays.