This study examines the microstructure, crystallographic texture evolution, and mechanical properties of stainless steel 316L fabricated through electron beam melting using a stochastic scan strategy at a preheat temperature of 1123 K. X-ray diffraction confirmed the presence of a pure austenitic phase in the fabricated material. Equiaxed cellular structures were observed in the center of the melt pool regions and elongated cellular structures observed at the melt pool overlap regions. A finite element-based numerical model was employed to estimate the thermal gradients and solidification rates within the melt pool of an electron beam spot. Microstructural analysis indicated a generation of columnar grains from the bottom to the top of the build owing to high thermal gradients. A crystallographic texture investigation showed a generation of strong fiber texture along the build direction of the material and reported that the stress distributions within the melt pool led to a strong crystallographic texture driven by the stress evolution observed from thermokinetic computational modelling of the electron beam-melting process. Mechanical properties were assessed using profilometry-based indentation plastometry, demonstrating strain hardening at a high temperature of 773 K.

High-strength wrought magnesium alloys are one of the sought-after materials in the automotive sector owing to the demands for weight reduction in the automobiles due to fuel economy and CO₂ emission. However, because of low room temperature strength and formability of Mg alloys, only a few applications in wrought form have been explored with these materials. In the present investigation, a high strength, good ductility and low cost wrought magnesium alloy with Mg-Sn-Zn composition have been developed and subjected to conventional wrought processing. Hot rolling was carried out at 350°C without homogenization and after homogenization at 300°C and 330°C. The phase stability, microstructure and texture of the alloy has been investigated for as-cast, homogenized and hot rolled conditions. The compositional and microstructural characterization was carried out by Electron Probe Micro-analysis (EPMA) and optical microscopy respectively. Texture evolution was investigated by X-ray diffraction method. A strong (0002) basal texture develops after hot rolling without homogenization. The (0002) basal texture has been weekend by splitting of poles and double peak distribution when hot rolling was carried out after homogenization.