Graphene (Gr) is of great interest in the development of new electronic, photonic, and composite materials. The physical properties of Gr can vary depending on the number of layers, and this unique property makes it a potential material for different electronic applications. In this study, few-layer graphene (FLG) film was spin-coated onto the InP semiconductor surface and the FLG/n-InP Schottky contact was produced. The properties and quality of the FLG nano-film were determined by using Raman spectroscopy. Parameters such as ideality factor, barrier height, and series resistance of Schottky contacts were calculated using current-voltage (I-V) curves. With the Gaussian distribution, the mean ideality factor of the Gr/InP contacts was found to be =1,47, and the mean barrier height values were found to be =0.68 eV. The standard deviation values were calculated as σ=0.32 for the ideality factor and σ=0.06 eV for the barrier height. In addition, the series resistance values were calculated from the Cheung functions and were found to be in agreement with the literature. Finally, the current conduction mechanisms of the Gr/n-InP structure were revealed by examining the logarithmic I-V characteristics.
31 December 2024 in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Bu çalışmada, yüksek ve düşük dereceli temel pasif devre elemanları hakkında Chua ve Wang tarafından oluşturulan modellerden bahsedilerek bunların avantajları ve dezavantajlarından mukayeseli olarak bahsedilmektedir. Chua modelinde gerilim, akım, akı ve yük temel büyüklük olarak düşünülerek bu devre elemanları karesel bir metodla yerleştirilmektedir. Buna karşın Wang modelinde ise, gerilim ve akımın temel büyüklük olmadığı ve bundan dolayı karesel modelin tam manasıyla doğru olmadığı gerekçesiyle yeni bir model ortaya konulmaktadır. Bu modele göre, sadece akı ve yük temel büyüklük olarak düşünülmekte ve üçgensel bir model ile devre elemanları konumlandırılmaktadır. Ancak bu iki modelde de elemanların yerleştirilmesinde bazı eksikler/hatalar bulunduğu için her iki modelin tam olarak doğru olmadığını düşünmekteyiz. Böylece her iki modelin avantajları ve dezavantajlarının doğru olarak tanımlanmasıyla daha doğru bir modelin oluşturulmasında önemli bir temel oluşturacağı düşüncesine ulaşmaktayız.