Over the last decade, large-scale antennas have been developed to enhance precise blue force tracking and improve situational awareness. In general, such large-scale antennas, ranging from 1 to up to 10 m, need a specific mechanism that can reconfigure their shapes and morphologies, resulting in stowing and deploying upon the given environment. In parallel, it must be noted that such deployable mechanisms should accommodate a large aperture diameter while ensuring they are lightweight, robust, and structurally rigid to avoid undesired deformations due to the deployment. With these in mind, this work presents a large frustum-shaped deployable antenna mechanism with a large aperture diameter of 7.5 m. The deployable mechanism is composed of hierarchical bayes the radial direction at 30° intervals. Twelve bayes in total identify the overall morphology of the deployable antenna, which features a dodecagon. Specifically, the bay is composed of three linkage structures: a six-bar linkage mechanism, a V-folding mechanism, and a single pantograph mechanism. As a result of static and dynamic simulations, it is identified that the mechanism achieves an area-to-mass ratio of 5.003 m2/kg and a safety factor of 323.8 upon deployment. Conclusively, this work demonstrates a strong potential of the deployable antenna mechanism, providing high rigidity and large aperture diameter while ensuring high stability in space environments.
Until now, a swim-up or microchip-based method has been mainly utilized for separating normal sperm for use in assisted reproductive technology. However, it requires excessive sorting time due to preprocessing and collects a limited number of motile sperms. To improve this process, we propose a gravity-fed high motility sperm sorting device that utilizes the rheotaxis of sperm, which minimizes separation time and improves throughput. The device features a mesoscale microfluidic channel to maximize the throughput, and an outlet at the bottom is configured to control the fluid velocity in the channel by using gravity. To control and automate semen injection and suction of the sorted sperm, a pipette controller using a cam was fabricated. After constructing the system, a sorting experiment was performed using canine semen to confirm the separation efficiency. After injecting the semen in the channel, the delay time between injection and suction was measured and the relative improvement of the index of motility was investigated according to measured delay time. As a result of repeated experiments, it was confirmed that the highest improvement was obtained at a delay time of 80 s, and the mean velocity, %motility, MI, and motile sperm rates were improved by 8.94%, 32.58%, 35.48%, and 21.99%, respectively.
This study introduces a fruit harvesting mechanism powered by a single motor, designed for integration with unmanned aerial vehicles (UAVs). The mechanism performs reciprocating motion by converting linear motion into rotational motion. Consequently, the end-effector can execute multi-dimensional kinematic trajectories, including biaxial and rotational movements, synchronized with the motor’s position. These axial and rotational motions facilitate the gripper’s ability to reach, retrieve, and detach fruit from branches during the harvesting process. Notably, a critical consideration in designing this fruit harvesting mechanism is to generate the necessary torque at the end-effector while minimizing reaction forces and torque that could destabilize the UAV during flight. With these considerations in mind, this preliminary study aimed to harvest a Fuji apple and conduct a dynamic analysis. We constructed a prototype of the single motor-driven fruit harvesting mechanism using a suitable servo motor. To assess its mechanical performance and evaluate its impact on the hexacopter, we developed both a specific test platform featuring a six-spherical-prismatic-spherical parallel structure and a virtual environmental flight simulator. Overall, the results demonstrate the successful harvesting of a Fuji apple weighing approximately 300 g by the single motor-driven fruit harvesting mechanism, with no adverse effects observed on the hexacopter’s operation.
Space mesh antennas require large-diameter reflectors to achieve aperture surfaces with high gain. To date, many pioneering studies have pursued deployable mechanisms capable of achieving high deployment ratios, primarily focusing on ring and umbrella structures for spaceborne antennas. In this work, a conceptual design of a Deployable Pantograph Rib structure-based parabolic Antenna (De-PaRA) is presented by employing pantograph structures that ensure high stowage efficiency. This approach addresses the shortcomings of conventional space antenna mechanisms. In parallel, this study aims to overcome the structural safety issues that may arise from insufficient axial stiffness of the rib geometry after deployment. To achieve these objectives, superelastic shape memory alloy (SMA) wires were integrated along the antenna ribs to reinforce axial stiffness while maintaining constant inter-rib spacing. Modal analysis demonstrated that SMA wire integration increases the axial stiffness by approximately 2-fold, with eigenfrequency rising from 9.932 to 14.3 Hz. A prototype with a 1.6 m deployed diameter, achieving a volume deployment ratio of 58.8, was quantitatively evaluated through multi-body dynamics simulations and experiments. These results demonstrate reliable deployment operation and mechanical feasibility.
This study introduces a fruit harvesting mechanism powered by a single motor, designed for integration with unmanned aerial vehicles (UAVs). The mechanism performs reciprocating motion by converting linear motion into rotational motion. Consequently, the end-effector can execute multi-dimensional kinematic trajectories, including biaxial and rotational movements, synchronized with the motor's position. These axial and rotational motions facilitate the gripper's ability to reach, retrieve, and detach fruit from branches during the harvesting process. Notably, a critical consideration in designing this fruit harvesting mechanism is to generate the necessary torque at the end-effector while minimizing reaction forces and torque that could destabilize the UAV during flight. With these considerations in mind, this preliminary study aimed to harvest a Fuji apple and conducted dynamic analysis. We constructed a prototype of the single motor-driven fruit harvesting mechanism using a suitable servo motor. To assess its mechanical performance and evaluate its impact on the hexacopter, we developed both a specific test platform featuring a six-spherical-prismatic-spherical parallel structure and a virtual environmental flight simulator. Overall, the results demonstrate the successful harvesting of a Fuji apple weighing approximately 300 g by the single motor-driven fruit harvesting mechanism, with no adverse effects observed on the hexacopter's operation.