Gabriela Teixeira da Silva

Mrs. Gabriela Teixeira da Silva

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 November 2024 in Polymers
Verified
Journal Article
Open access
PDF file
DFDANIEL TAVARES Farias
DANIEL TAVARES Farias
Jalel LabidiJalel Labidi
Jalel Labidi
Cristiane PedrazziCristiane Pedrazzi
Cristiane Pedrazzi
Darci GattoDarci Gatto
Darci Gatto
PCPedro Henrique Gonzalez de Cademartori
Pedro Henrique Gonzalez de Cademartori
TATielle Moraes Almeida
Tielle Moraes Almeida
Cellulose nanocrystals (CNC) receive great attention for their physical and optical properties, high surface area, high tensile strength, rigidity (Young’s modulus up to 140 GPa), and ease of surface modification. However, controlling the properties of CNC is still challenging, given the wide variety of pulp sources and the complexity of finding suitable processing conditions. In the present study, acid hydrolysis efficiently isolated CNC from wood Acacia mearnsii brown kraft pulp (AMKP). Initially, the AMKP was delignified by the treatment with acidified sodium chlorite. The Acacia mearnsii kraft pulp obtained was then subjected to acid hydrolysis with sulfuric acid at concentrations of 50 to 58% 45 °C for 60 min. The hydrolysate was sonicated in an ultrasonic processor for 30 min. The chemical composition was determined by Fourier transform infrared spectroscopy (FTIR), crystallinity by X-ray diffraction (XRD), zeta potential by Zetasizer ZS equipment, thermal stability by thermogravimetric analysis (TGA), and morphology by transmission electron microscopy (TEM) to verify the effect of acid concentration on the yield and properties of CNC. The optimization of the isolation process demonstrated that the maximum yield of 41.95% can be obtained when AMWP was hydrolyzed with sulfuric acid at a concentration of 54%. It was possible to isolate CNC with a crystallinity index between 71.66% and 81.76%, with the onset of thermal degradation at 240 °C; zeta potential of −47.87 to 57.23 mV; and rod-like morphology, with lengths and widths between 181.70 nm and 260.24 nm and 10.36 nm and 11.06 nm, respectively. Sulfuric acid concentration significantly affected the yield of acid hydrolysis, allowing the isolation of CNC with variable dimensions, high thermal stability, high crystallinity index, and great colloidal stability in aqueous medium.

19 September 2024 in Ciência Florestal
Verified
Journal Article
Open access
PDF file
WWWanessa Lunardi Wacht
Wanessa Lunardi Wacht
DFDANIEL TAVARES Farias
DANIEL TAVARES Farias
Rodrigo ColdebellaRodrigo Coldebella
Rodrigo Coldebella
GSGabriela Teixeira da Silva
Gabriela Teixeira da Silva
MFMarciano Ferreira Loureiro Filho
Marciano Ferreira Loureiro Filho
Cristiane PedrazziCristiane Pedrazzi
Cristiane Pedrazzi
O porongo (Lagenaria siceraria (Molina) Standl.) é um fruto muito cultivado no Sul do Brasil pela sua utilização na confecção de cuias, gerando grande quantidade de resíduos obtidos do processamento da casca. Nesse contexto, avaliou-se o uso dos resíduos gerados pela cadeia produtiva da confecção de cuias de porongo como fonte alternativa de recurso bioenergético através da produção de briquetes. A caracterização química do resíduo foi realizada a partir dos teores de extrativos totais, lignina, carboidratos e química imediata (cinzas, materiais voláteis e carbono fixo). Foram produzidos briquetes com 3 diferentes tratamentos granulométricos obtidos do processamento do material: in natura (tratamento 1), fração 10/20 mesh (tratamento 2) e fração 20/40 mesh (tratamento 3). A densidade básica e o poder calorífico do resíduo e densidades aparente, a granel e energética dos briquetes também foram avaliadas. Foi determinada a resistência mecânica a partir da análise de compressão dos briquetes. Para as análises de extrativos totais, lignina, carboidratos, cinzas, carbono fixo e materiais voláteis, foram encontrados valores de 1,67%, 30,70%, 58,07%, 1,84%, 14,49% e 83,67% respectivamente. A densidade básica da casca do porongo foi de 0,24g/cm³ e o poder calorífico de 3.902,9Kcal kg-1. Para densidades aparente de 1,03g/cm³(1), 1,04g/cm³(2) e 1,28g/cm³(3), a granel de 0,16g/cm³ para os três tratamentos e energética de 4,07Mcal/m³(1), 4,09Mcal/m³(2) e 5,04Mcal/m³(3). Para a resistência à compressão os briquetes resultaram em valores de 57,49MPa(1), 59,45MPa(2) e 74,36MPa(3). Nos tratamentos estudados, o resíduo na forma de briquetes se mostrou uma alternativa para geração de energia, com destaque para o tratamento (3). A partir das análises realizadas, foi possível concluir que o resíduo da casca do porongo apresenta características físico-químicas desejáveis para ser utilizado como biomassa para fins energéticos.

19 September 2024 in Ciência Florestal
Verified
Journal Article
Open access
PDF file
CWCarline Andréa Welter
Carline Andréa Welter
MRMatheus da Silva Roso
Matheus da Silva Roso
ESEduardo Schmitt
Eduardo Schmitt
DSDieimes Maciel da Silva
Dieimes Maciel da Silva
WWWanessa Lunardi Wacht
Wanessa Lunardi Wacht
Cristiane PedrazziCristiane Pedrazzi
Cristiane Pedrazzi
A madeira de Paulownia tomentosa Steud. tem potencial para o desenvolvimento de produtos com alto valor agregado. A madeira é leve e macia, com excelentes propriedades de usinagem e acabamento, e por isso é usada para fabricação de materiais compósitos, chapas de madeira, móveis, papel e instrumentos musicais. Assim, o objetivo deste estudo foi avaliar as características físicas e químicas da madeira de P. tomentosa, a fim de recomendar seu uso para a obtenção e geração de bioprodutos. Cinco árvores, com treze anos de idade foram abatidas para retirada de discos em diferentes alturas, os quais foram processados em cunhas e serragem. Para a determinação da densidade básica, foi empregada a metodologia descrita na norma NBR 11941. Os teores de extrativos totais, ligninas e holocelulose foram determinados segundo as normas da Technical Association of the Pulp and Paper industry – TAPPI. Análises de espectrometria no infravermelho, de química imediata (materiais voláteis, carbono fixo e cinzas) e termogravimétrica da madeira também foram realizadas. Os resultados obtidos para a madeira de P. tomentosa foram: densidade básica de 0,269 g/cm³, 17,3% de extrativos totais, 17,1% da lignina Klason, 1,15 de relação S/G e teores de holocelulose de 67,7%. A análise química imediata da madeira resultou em 86,5% de materiais voláteis, 12,9% de carbono fixo e 0,6 % de cinzas. A baixa densidade básica da madeira de P. tomentosa, bem como o baixo teor de lignina e de carbono fixo da madeira são características desfavoráveis do ponto de vista energético. Por outro lado, devido ao alto teor de holocelulose e baixo teor de lignina, a madeira de P. tomentosa se mostra promissora para a produção de bioprodutos de base celulósica, como a nanocelulose.

6 October 2026 in Forests
Verified
Journal Article
Open access
PDF file
GSGabriela Teixeira da Silva
Gabriela Teixeira da Silva
Jalel LabidiJalel Labidi
Jalel Labidi
DFDANIEL TAVARES Farias
DANIEL TAVARES Farias
Rodrigo ColdebellaRodrigo Coldebella
Rodrigo Coldebella
AMAnderson Stoffels Mallmann
Anderson Stoffels Mallmann
Cristiane PedrazziCristiane Pedrazzi
Cristiane Pedrazzi
Eucalyptus kraft pulping represents an important source for the production of lignin-containing cellulose nanofibrils (LCNF); however, the influence of controlled residual lignin levels on fibrillation energy demand and suspension stability remains poorly understood. This study evaluated the effect of residual lignin on the chemical properties of Eucalyptus urograndis kraft pulps, energy consumption during mechanical fibrillation over 20 passes in a Super Masscolloider, and the colloidal stability of the resulting suspensions. Brown kraft pulp was subjected to delignification treatments under mild (60 °C, 3 min) and severe (95 °C, 60 min) conditions, resulting in pulps with residual lignin contents of 3.63%, 1.77%, and 0.46%, respectively. Delignification reduced the kappa number from 29.59 in the brown pulp to 16.16 and 1.63 after mild and severe treatments, respectively, while pulp viscosity varied according to treatment severity. Energy consumption increased progressively with the number of passes and was strongly affected by residual lignin content. After 20 passes, the brown pulp (3.63% lignin) showed the highest energy consumption, reaching approximately 0.109 kWh, compared with 0.016 and 0.018 kWh for pulps containing 1.77% and 0.46% residual lignin, respectively. Despite these differences in energy consumption, all LCNF suspensions exhibited higher absolute zeta potential values under neutral to alkaline conditions, ranging from approximately −24 to −37 mV. These findings indicate that controlled delignification was associated with lower energy consumption during mechanical fibrillation while maintaining favorable electrokinetic behavior of the colloidal suspensions. Therefore, controlling residual lignin content may represent a strategy for balancing lignin removal, fiber preservation, and energy consumption during mechanical fibrillation under the conditions evaluated in this study.

1 January 2025 in Ciência Rural
Verified
Journal Article
Open access
LGLuciane Gorski
Luciane Gorski
DFDANIEL TAVARES Farias
DANIEL TAVARES Farias
GSGabriela Teixeira da Silva
Gabriela Teixeira da Silva
RRRoberta Rodrigues Roubuste
Roberta Rodrigues Roubuste
GVGuilherme Valcorte
Guilherme Valcorte
Cristiane PedrazziCristiane Pedrazzi
Cristiane Pedrazzi
This study evaluated the technological properties of medium-density panels made from wood particles of the species Ateleia glazioviana Baill. The trees, 25 years old, were collected in Santa Maria, state of Rio Grande do Sul, Brazil, where the species occurs naturally. The logs were sawn into boards, reduced to flake particles and then processed in a hammer mill to obtain two particle sizes (2.45 and 1.0 mm). Two treatments were carried out: T1 with a homogeneous mat of mixed particles from both obtained sizes, and T2 with a multi-layer configuration with different particle sizes in the outer and inner layers (proportion 40:60:40). The urea-formaldehyde adhesive was applied with a spray gun inside a rotating drum at a concentration of 10% (dry weight basis) with a catalyst (ammonium sulphate) and a 1% paraffin emulsion. The particle mattress, with dimensions of 40 x 40 x 0.95 cm, was pre-pressed at room temperature for 5 minutes, followed by pressing at a temperature of 180 ºC for 8 minutes and a pressure of 2.94 MPa. After conditioning, the specimens were cut according to the Brazilian standard, and physical tests were carried out to determine the moisture content, density, compaction rate, water absorption and swelling in thickness. The mechanical tests conducted were for determining static bending, internal bonding, and surface screw withdrawal. The results demonstrated the feasibility of using Ateleia glazioviana Baill wood in the production of particleboard, with an indication for use where high mechanical strength is not required and limited to indoor environments.

12 August 2025 in Advances in Forestry Science
Verified
Journal Article
Closed access
PDF file
LGLuciane Gorski
Luciane Gorski
GVGuilherme Valcorte
Guilherme Valcorte
RRRoberta Rodrigues Roubuste
Roberta Rodrigues Roubuste
DFDANIEL TAVARES Farias
DANIEL TAVARES Farias
GSGabriela Teixeira da Silva
Gabriela Teixeira da Silva
Darci GattoDarci Gatto
Darci Gatto
O objetivo do presente estudo foi avaliar o desempenho de peças serradas de madeira de Ateleia glazioviana submetidas à secagem ao ar livre e em estufa, com a finalidade de conhecimento acerca do uso da espécie. O estudo foi desenvolvido no Laboratório de Produtos Florestais (LPF), pertencente a Universidade Federal de Santa Maria (UFSM). Foram selecionados aleatoriamente corpos de prova da madeira da espécie, os quais foram alocados em estufa de circulação forçada de ar com temperatura de 60 °C e a secagem ao ar livre, em que o material foi colocado lado a lado sobre uma estrutura com cobertura de “Brasilite”. As variáveis avaliadas foram teor de umidade, taxa de secagem e avaliação dos defeitos como rachadura e empenamentos. A taxa de secagem para as peças em estufa variou de 12,65 (g/cm2h)103 até a estabilização em 0,11 (g/cm2h)103 e taxa média de 1,87 (g/cm2h)103. Já a taxa de secagem ao ar livre média foi de 0,14 (g/cm2h)103, teve início em 1,20 (g/cm2h)103 finalizando em 0,01 (g/cm2h)103. Nos tratamentos de secagem em estufa e ao ar livre foram observados defeitos como rachaduras na superfície das peças e empenamento, exceto para o encanoamento em que as peças secas no ambiente externo não apresentaram esse defeito. De modo geral, a madeira de A. glazioviana mostrou-se pouco suscetível ao surgimento de defeitos, não apresentando peças com colapso ou outros defeitos que inviabilizassem seu uso, portanto, dentro dos padrões de qualidade da norma.