Yifan Li

Dr. Yifan Li


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
Bin YangBin Yang
Bin Yang
xin zhuxin zhu
xin zhu
Boan WeiBoan Wei
Boan Wei
MLMinzhang Liu
Minzhang Liu
YLYifan Li
Yifan Li
FWFaming Wang
Faming Wang
Heat dissipation in high-heat flux micro-devices has become a pressing issue. One of the most effective methods for removing the high heat load of micro-devices is boiling heat transfer in microchannels. A novel approach to flow pattern and heat transfer recognition in microchannels is provided by the combination of image and machine learning techniques. The support vector machine method in texture characteristics successfully recognizes flow patterns. To determine the bubble dynamics behavior and flow pattern in the micro-device, image features are combined with machine learning algorithms and applied in the recognition of boiling flow patterns. As a result, the relationship between flow pattern evolution and boiling heat transfer is established, and the mechanism of boiling heat transfer is revealed.

2 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
YLYifan Li
Yifan Li
琮朱琮哲 朱
琮哲 朱
XLXiuming Li
Xiuming Li
Bin YangBin Yang
Bin Yang
Nowadays, the number of transistors on electronic components is increasing exponentially leading to an ultra-high heat flux (106~107 W/m2). The non-uniform load distribution on the chip and the local hot spots in the thermal environment are key issues in a data center (DC). Microchannel liquid cooling is an effective method to inhibit heat accumulation on the chip. Optimizing the air distribution is a crucial approach to realizing energy savings. This study summarizes the latest research on thermal management by microchannel liquid cooling and air distribution optimization in DCs. The existing issues concerning the structure universality of the microchannel heat sink (MCHS), the stability of flow boiling and the new coolant, the prediction of local hot spots, and the intelligent control of the cooling system are identified. Furthermore, a novel cooling strategy of multi-scale synergy is recommended, which is expected to suppress local hot spots and heighten temperature uniformity. This review provides valuable insights into multi-scale thermal management for DCs. It paves the way for applying innovative cooling technologies and artificial intelligence methods to promote the efficient operation and low-carbon retrofit of DCs.

25 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
YLYifan Li
Yifan Li
天王天宇 王
天宇 王
ZWZhipeng Wang
Zhipeng Wang
琮朱琮哲 朱
琮哲 朱
JYJunlan Yang
Junlan Yang
Bin YangBin Yang
Bin Yang
An open type of microchannel with diamond pin fins (OM-DPFs) is introduced for the cooling of high-performance electronic chips. For a Reynolds number (Re) of 247~1173, a three-dimensional model is established to explore the hydrothermal properties of the OM-DPF and compare it to traditional heat sinks with closed rectangular microchannels (RMs), heat sinks with open microchannels (OMs), and the results in the existing research. Firstly, the synergy between tip clearance and pin fins on the hydrothermal properties is discussed. Secondly, the entropy production principle is adopted to analyze the irreversible losses for different heat sinks. Lastly, the total efficiencies of different heat sinks are assessed. The RMs present the worst heat transfer with the lowest friction loss. For the OMs, the temperature and pressure drop are decreased slightly compared to those of the RMs, and the irreversible loss is reduced by 4% at Re = 1173 because of the small tip clearance. But the total efficiency is lower than that of the RMs because the pressure drop advantage is offset by the weak heat transfer. For the OM-DPF, the combined structure has a noticeable impact on the multiple physical fields and hydrothermal characteristics, which present the best thermal performance at the cost of the highest friction loss. The irreversible loss of heat transfer in the OM-DPF is reduced obviously, but the friction irreversible loss significantly increases at high Re values. At Re = 429, the total entropy production of the OM-DPF is reduced by 47.57% compared with the RM. Compared to the OM and the single-pin fin structure in the literature, the total efficiency of the OM-DPF is increased by 14.56% and 40.32% at Re = 614. For a pump power of 0.1 W, the total thermal resistance (Rth) of the OM-DPF is dropped by 23.77% and 21.19% compared to the RM and OM. For a similar Rth, the pump power of the combined structure is 63.64% and 42.86% lower than that of the RM and OM. Thus, the novel combined heat sink can achieve efficient heat removal while controlling the energy consumption of liquid cooling systems, which has bright application prospects.

27 June 2025 in Energies
Verified
Journal Article
Open access
PDF file
LZLin Zhong
Lin Zhong
JSJingli Shi
Jingli Shi
YLYifan Li
Yifan Li
ZWZhipeng Wang
Zhipeng Wang
In recent years, the number of transistors on electronic chips has surpassed Moore’s law, resulting in overheating and energy consumption problems in data centers (DCs). Chip-level microchannel cooling is expected to address these challenges. Grooved heat sinks with droplet-shaped fins were introduced to modify the overall capability of the cooling system. The degree of impact of the distribution of grooves and fins was analyzed and optimized using the Taguchi method. Moreover, the coupling effect of flow and temperature fields was explained using the field synergy theory. The key findings are as follows: for thermal resistance, pump power, and overall efficiency, the influence degree is the number of combined units > number of fins in each unit > distribution of the combined units. The optimal configuration of 21 combined units arranged from dense to sparse with one fin in each unit achieves 14.05% lower thermal resistance and 8.5% higher overall efficiency than the initial heat sink. The optimal configuration of five combined units arranged from sparse to dense with one fin in each unit reduces the power energy consumption by 27.61%. After optimization, the synergy angle between the velocity vector and temperature gradient is reduced by 4.29% compared to the smooth heat sink. The coupling effect between flow and heat transport is strengthened. The optimized configuration can better balance heat dissipation and energy consumption, improve the comprehensive capability of cooling system, provide a feasible solution to solve the problems of local overheating and high energy consumption in DCs.