Hua Li

Prof. Dr. Hua Li


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2023 in Energies
Verified
Journal Article
Open access
PDF file
Yulin WangYulin Wang
Yulin Wang
XLXiangling Liao
Xiangling Liao
GLGuokun Liu
Guokun Liu
HXHaokai Xu
Haokai Xu
CGChao Guan
Chao Guan
Yanzhou QinYanzhou Qin
Yanzhou Qin
The performance of a polymer electrolyte membrane fuel cell (PEMFC) closely depends on internal reactant diffusion and liquid water removal. As one of the key components of PEMFCs, bipolar plates (BPs) provide paths for reactant diffusion and product transport. Therefore, to achieve high fuel cell performance, one key issue is designing BPs with a reasonable flow field. This paper provides a comprehensive review of various modifications of the conventional parallel flow field, interdigitated flow field, and serpentine flow field to improve fuel cells’ overall performance. The main focuses for modifications of conventional flow fields are flow field shape, length, aspect ratio, baffle, trap, auxiliary inlet, and channels, as well as channel numbers. These modifications can partly enhance reactant diffusion and product transport while maintaining an acceptable flow pressure drop. This review also covers the detailed structural description of the newly developed flow fields, including the 3D flow field, metal flow field, and bionic flow field. Moreover, the effects of these flow field designs on the internal physical quantity transport and distribution, as well as the fuel cells’ overall performance, are investigated. This review describes state-of-the-art flow field design, identifies the key research gaps, and provides references and guidance for the design of high-performance flow fields for PEMFCs in the future.

23 November 2024 in Catalysts
Verified
Journal Article
Open access
PDF file
XZXueyan Zhao
Xueyan Zhao
QTQingfeng Teng
Qingfeng Teng
HTHaoliang Tao
Haoliang Tao
WTWenqiang Tang
Wenqiang Tang
YCYiwei Chen
Yiwei Chen
LZLiangzhu Zhu
Liangzhu Zhu
Ammonia is known as an alternative hydrogen supplier because of its high hydrogen content and convenient storage and transport. Hydrogen production from ammonia decomposition also provides a source of hydrogen for fuel cells. While catalysts composed of ruthenium metal atop various support materials have proven to be effective for ammonia decomposition, non-precious-metal-based catalysts are attracting more attention due to desires to reduce costs. We prepared a series of Fe, Co, Ni, Mn, and Cu monometallic catalysts and their alloys as catalysts over proton-conducting ceramics via the impregnation method as precious-metal-free ammonia decomposition catalysts. While Co and Ni showed superior performance compared to Fe, Mn, and Cu on a BaZr0.1Ce0.7Y0.1Yb0.1O3−б (BZCYYb) support as an ammonia decomposition catalyst, the cost of Fe is much lower than that of other metals. Alloying Fe with Co can significantly increase the conversion and stability and lower the overall cost of materials. The measured ammonia decomposition rate of FeCo/BZCYYb reached 100% at 600 °C, and the ammonia decomposition rate was almost unchanged during the long-term test of 200 h, which reveals its good catalytic activity for ammonia decomposition and thermal stability. When the metallic catalyst remained unchanged, BZCYYb also exhibited better performance compared to other commonly used oxide supports. Finally, when ammonia cracked using our alloy catalyst was fed to solid oxide fuel cells (SOFCs), the peak power densities were very close to that achieved with a simulated fully cracked gas stream, i.e., 75% H2 + 25% N2, thus proving the effectiveness of this new type of ammonia decomposition catalyst.

16 March 2024 in Catalysts
Verified
Journal Article
Open access
PDF file
QTQingfeng Teng
Qingfeng Teng
JSJunkang Sang
Junkang Sang
GCGuoxin Chen
Guoxin Chen
HTHaoliang Tao
Haoliang Tao
YWYunan Wang
Yunan Wang
LZLiangzhu Zhu
Liangzhu Zhu
On-site hydrogen generation from ammonia decomposition is a promising technology to address the challenges of direct transportation and storage of hydrogen. The main problems with the existing support materials for ammonia decomposition catalysts are their high cost and time-consuming preparation process. In this work, ammonia decomposition catalysts consisting of in situ-formed nano-Ru particles supported on a naturally abundant mineral fiber, attapulgite (ATP), were proposed and studied. Also, 1 wt.% Ru was uniformly dispersed and anchored onto the surface of ATP fibers via the chemical method. We found that the calcination temperatures of the ATP support before the deposition of Ru resulted in little difference in catalytic performance, while the calcination temperatures of the 1Ru/ATP precursor were found to significantly influence the catalytic performance. The prepared 1 wt.% Ru/ATP catalyst (1Ru/ATP) without calcination achieved an ammonia conversion efficiency of 51% at 500 °C and nearly 100% at 600 °C, with the flow rate of NH3 being 10 sccm (standard cubic centimeter per minute). A 150 h continuous test at 600 °C showed that the 1Ru/ATP catalyst exhibited good stability with a degradation rate of about 0.01% h−1. The 1Ru/ATP catalyst was integrated with proton ceramic fuel cells (PCFCs). We reported that PCFCs at 650 °C offered 433 mW cm−2 under H2 fuel and 398 mW cm−2 under cracked NH3 fuel. The overall results suggest low-level Ru-loaded ATP could be an attractive, low-cost, and efficient ammonia decomposition catalyst for hydrogen production.

18 September 2025 in Energies
Verified
Journal Article
Open access
PDF file
LHLin Huang
Lin Huang
JZJunlong Zhou
Junlong Zhou
SHSenrui Huang
Senrui Huang
SGSijie Gan
Sijie Gan
HLHangling Li
Hangling Li
HLHua Li
Hua Li
The significant potential loss of proton exchange membrane fuel cells (PEMFCs) at high current densities is primarily attributed to the high mass transfer resistance of the gas diffusion layer (GDL). The underlying mechanism of how structural parameters of the GDL under actual assembly conditions affect oxygen transport resistance remains unclear, particularly the quantitative relationship between the compression ratio (α) and tortuosity (γ). This study systematically evaluated the output performance and mass transfer overpotential of three commercially available GDLs with similar thickness and porosity under different compression ratios (5.4% to 27%) and four inlet humidity conditions (RH0% to RH100%). By accurately extracting and comparing mass transfer overpotentials, it was observed that the mass transfer overpotential initially decreased and then increased with the rising compression ratio, with an optimum observed at 21.6%. An empirical correlation between the compression ratio (α) and tortuosity (γ) was established as γ = 3.42α + 2.1. Based on this, a modified oxygen diffusion equation was proposed to accurately describe oxygen transport behavior within the GDL under compressed conditions. A modified oxygen diffusion equation was proposed to more accurately characterize the oxygen transport process within compressed GDLs. These findings establish a foundation for optimizing GDL design and stack assembly processes. Future work will build upon this study by incorporating multiphysics conditions such as stack clamping pressure, number of cells, intercell contact resistance, and assembly conditions (temperature and relative humidity), with the aim of elucidating the force–thermal–electrical–mass coupling mechanisms within the stack, thereby enhancing the overall performance and reliability of high-power-density proton exchange membrane fuel cell (PEMFC) stacks.

28 February 2026 in Drones
Verified
Journal Article
Open access
PDF file
CLChenxi Lu
Chenxi Lu
MYMeng Yu
Meng Yu
YWYin Wang
Yin Wang
HLHua Li
Hua Li
Unmanned vehicles are becoming increasingly essential in executing high-risk missions in unknown environments such as search and rescue. As the complexity of operational environments escalates, carrying out unmanned tasks becomes cumbersome or even infeasible for a single vehicle, hampered by limited perception and operational constraints. Aiming at enhancing the flexibility of unmanned operations under complicated scenarios, this study introduces AGC-NeRF, an innovative air–ground collaborative exploration framework that harnesses the functional complementarity of UAVs and UGVs—enabling a UGV to navigate through a complex scenario with the assistance of a UAV via referencing a neural radiance map. First, a UAV is employed to collect aerial images for reconstructing the environment to be explored by a UGV, leveraging its aerial perspective to achieve wide-area coverage and global environmental perception that is unattainable for a single UGV. Concurrently, an innovative image saliency evaluation approach is introduced to meticulously select landmarks that are contributive to the UGV’s navigation system, yielding a pre-trained NeRF model of the operation scene. Then, a landmark-aware 6-DOF ego-motion estimator and collision-free trajectory optimizer are designed for the UGV based on the NeRF map. Finally, an online replanning architecture is established which relies on a ground station for NeRF training and state optimization by synergizing the trajectory planner and the state estimator, which forms a dual-agent vision-only navigation pipeline. Simulations and experiments validate that AGC-NeRF enables reliable UGV trajectory planning and state estimation in unknown environments, demonstrating superior efficacy and robustness of the air–ground collaborative paradigm.