Experimental and numerical analyses were carried out to reveal the behaviors of two-layer graded aluminum foam materials for their dynamic compaction under blast loading. Blast experiments were conducted to investigate the deformation and densification wave formation of two-layer graded foams with positive and negative gradients. The shape of the stress waveform changed during the propagation process, and the time of edge rising was extended. Finite element models of two-layer graded aluminum foam were developed using the periodic Voronoi technique. Numerical analysis was performed to simulate deformation, energy absorption, and transmitted impulse of the two-layer graded aluminum foams by the software ABAQUS/Explicit. The deformation patterns were presented to provide insights into the influences of the foam gradient on compaction wave mechanisms. Results showed that the densification wave occurred at the blast end and then gradually propagated to the distal end for the positive gradient; however, compaction waves simultaneously formed in both layers and propagated to the distal end in the same direction for the negative gradient. The energy absorption and impulse transfer were examined to capture the effect of the blast pressure and the material gradient. The greater the foam gradient, the more energy dissipated and the more impulse transmitted. The absorbed energy and transferred impulse are conflicting objectives for the blast resistance capability of aluminum foam materials with different gradient distributions. The results could help in understanding the performance and mechanisms of two-layer graded aluminum foam materials under blast loading and provide a guideline for effective design of energy-absorbing materials and structures.
The blast resistance of a sandwich-walled cylinder/ring comprising two metal face-sheets and a graded metal foam core, subjected to internal air blast loading, is investigated. Analytical models are developed for the deformation of the sandwich cylinder with positive and negative gradient cores under internal blast loading. The deformation process is divided into three distinct phases, namely the fluid–structure interaction phase, core-crushing phase, and outer face-sheet deformation phase. Finite element modeling is performed using the Voronoi material model. The proposed analytical models are verified through finite element analysis, and reasonable agreement is observed between the analytical predictions and finite element results. The sandwich structures with high energy absorption capacity or low maximum radial deflection are satisfied for the protecting purpose of impact/blast resistance requirements. Typical deformation processes are classified and analyzed; the effects of explosive charge, face-sheet thickness, and core gradient on the structural response are also examined. The results indicate that both the deformation modes and the structural response of the cylinders are sensitive to the blast charge and core configuration. It is concluded that energy absorption capacity and maximum radial deflection are two conflicting goals for achieving high impact/blast resistance capability. An in-depth understanding of the behavior in sandwich-walled cylinders under blast impulse and the influence of the core configuration helps realize the advantages and disadvantages of using graded foam materials in sandwich structures and can provide a guideline for structural design.
Interactions between multiple bubbles are a feature of many engineering fields and are applied for military, medical, and energy exploration purposes. The difference in generation time between bubbles has a very significant effect on the subsequent formation of jets between bubbles. In this paper, interactions between three bubbles of approximately the same size arranged linearly and at equal distance from each other in a free field with different delay times are explored for the first time. A resistance wire is detonated by a high-voltage power supply with multiple branches to generate bubbles in the water. The discharge time interval between the different branches of the power supply can be precisely controlled. Using high-speed cameras to observe the interactions of the three bubbles under different time delay combinations, we observe jets of different forms and strengths. The interactions between the bubbles are classified according to the properties of the resulting jets. In addition, it is observed that taking the “piercing jet” generated by the interaction of two bubbles as a reference, a third bubble generated under different time delay combinations can enhance or weaken the jet. When the time interval between two bubbles produces an optimal piercing jet with the fastest propagation speed and the longest propagation distance, the third bubble will not affect or weaken the jet. However, when the time interval between the two bubbles does not produce an optimal jet, a third bubble generated at an appropriate time will help to increase the propagation distance and propagation velocity of the jet. Finally, the widths of the piercing jets generated by bubble coupling and the oscillation periods of the three bubbles are statistically analyzed.
In order to obtain the dispersion rule of fragments about the asymmetric shell subjected to internal blast loading, two different cross section structures, concave-shaped and convex-shaped, were carried out by experimental and numerical methods. The simulation results well coincided with the experimental results, and the spatial distribution and fragment velocity were obtained. The optimal curvatures for the different concave structures changed from 4r to 6r (r represents the charge radius), as the central angle of concave structure changed from 90° to 120°. However, the optimal curvature changed weakly when the central angle of concave structure was larger than 120°. In addition, a formula which can rapidly predict the projection angle range was fitted for the convex structure. The conclusions can provide a reference for concave-shaped and convex-shaped structures to achieve a higher effectiveness of fragments.
24 October 2023 in Propellants, Explosives, Pyrotechnics