This study evaluated the capability of coal fly ash (untreated and physicochemically modified) when utilised as a filler in cis-1,4-polyisoprene rubber. Physicochemical modification of the ash was achieved using two techniques: (1) ammonium sulphate roasting followed by controlled aqueous dissolution and (2) sulphuric acid leaching. In addition, the effectiveness of a silane-coupling agent (Si-69) in enhancing the compatibility of untreated and physically modified ash samples with natural rubber was investigated. The ammonium sulphate roasting route increased the surface area and roughness and decreased the particle–particle agglomeration of the fly ash sample. Sulphuric acid treatment decreased the particle–particle agglomeration. However, no increase in surface roughness was observed. The untreated fly ash samples were not significantly reinforcing, and the properties they imparted were inferior to the least reinforcing carbon black. Silane treatment resulted in improved dispersion and wetting of the fly ash in the rubber matrix, leading to improved reinforcement compared to neat rubber. In situ addition of the silane during preparation of the vulcanisates led to composites with better mechanical properties than the composites containing silane-pre-treated fly ash. Composites filled with ammonium sulphate-roasted-and-leached ash performed better than the composites filled with untreated ash and sulfuric acid-leached ash. These findings suggest that modified fly ash holds promise as an effective filler for rubber materials, offering potential environmental and economic benefits by repurposing coal combustion by-products.
Coal incineration for power generation in South Africa generates an average of 25 Mt of coal ash annually, with only 7 % being utilised, hence there is growing advocacy for coal waste utilisation. A multi-technique approach was used to analyse the variability of coal fly ash and legacy coal ash, assessing its suitability for acid mine drainage remediation. Legacy coal ash samples were collected from 3 South African power stations and cola fly ash samples from the fourth power station. The variability studies were carried out in 3 phases, i.e. daily, weekly, and monthly to assess if there are any significant changes in the physical and chemical properties of the coal ash over time. All the samples were classified as Class F, having a SiO2, Al2O3, and Fe2O3 wt. % of > 70 %. The highest net neutralising potential (NNP) value of 151 CaCO3 kg/t was obtained over a coal fly ash sample, while 87.1, 77.9, and 30.3 CaCO3 kg/t were the highest obtained from each of the three respective power stations where legacy coal ash was sampled. The acid neutralising properties of legacy coal ash, coupled with its good civil engineering properties, make it a feasible option for use as a reactive barrier or mine backfilling material for acid mine drainage treatment.