Dennis Simbarashe Moyo

Dr. Dennis Simbarashe Moyo

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in Molecules
Verified
Journal Article
Open access
PDF file
AMAntonio Benjamim Mapossa
Antonio Benjamim Mapossa
JLJorge López-Beceiro
Jorge López-Beceiro
DADíaz-Díaz Ana-María
Díaz-Díaz Ana-María
RARamón Pedro Artiaga
Ramón Pedro Artiaga
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
WFWalter W. Focke
Walter W. Focke
Poly(lactic acid) (PLA) is an attractive candidate for replacing petrochemical polymers because it is fully biodegradable. This study investigated the potential of PLA as a sustainable and environmentally friendly alternative material that can be developed into commercially viable wearable mosquito repellent devices with desirable characteristics. PLA strands containing DEET and IR3535 were prepared by twin screw extrusion compounding and simultaneously functioned as plasticizers for the polymer. The plasticizing effect was investigated by thermal and rheological studies. DSC studies showed that the addition of DEET and IR3535 into PLA strands reduced the glass transition temperature consistent with predictions of the Fox equation, thus proving their efficiency as plasticizers. The rheology of molten samples of neat PLA and PLA/repellents blends, evaluated at 200 °C, was consistent with shear-thinning pseudoplastic behaviour. Raman studies revealed a nonlinear concentration gradient for DEET in the PLA strand, indicating non-Fickian Type II transport controlling the desorption process. Release data obtained at 50 °C showed initial rapid release followed by a slower, near constant rate at longer times. The release rate data were fitted to a novel modification of the Peppas-Sahlin desorption model.

14 November 2025 in Minerals
Verified
Journal Article
Open access
PDF file
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
GKGeorge Kleinhans
George Kleinhans
XWXueting Wei
Xueting Wei
FDFrederic J. Doucet
Frederic J. Doucet
EMElizabet Van Der Merwe
Elizabet Van Der Merwe
The surface modification of coal fly ash (CFA) with silane coupling agents improves its compatibility with polymer matrices and supports its use as a sustainable filler in composite materials. This study examined the effects of the solvent system, reaction temperature, and pH on the grafting of 3-aminopropyltriethoxysilane (APTES) onto CFA surfaces. Functionalization was assessed by Fourier-transform infrared spectroscopy (FTIR), focusing on the CH2 symmetric and asymmetric stretching bands of pure APTES at 2919 and 2957 cm−1, noting that a slight shift in these bands can be expected following the change in the local chemical environment upon grafting. Solvent mixtures containing water (ethanol/water, acetone/water, and sulfuric acid/water) produced stronger coupling than the toluene solvent, which indicated the importance of water for APTES hydrolysis and silanol formation. Coupling efficiency increased with temperature and reached a maximum at 80 °C, where the balance between hydrolysis and condensation favored the formation of stable Si–O–Si bonds. The highest degree of functionalization was observed at pH 9, which corresponds to the point of zero charge of alumina in CFA, where neutral surface hydroxyl groups were available to react with silanols. These results define the optimal conditions for APTES grafting onto CFA and demonstrate its potential as a silane-modified filler in polymer composites. Atomic force microscopy (AFM) provided direct visual evidence of significant surface texture modifications induced by APTES treatment in the ethanol/water solvent system.

11 December 2024 in Minerals
Verified
Journal Article
Open access
PDF file
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
FDFrederic J. Doucet
Frederic J. Doucet
SHShanganyane Percy Hlangothi
Shanganyane Percy Hlangothi
CWChristopher Woolard
Christopher Woolard
KRKelley Anne Reynolds-Clausen
Kelley Anne Reynolds-Clausen
EMElizabet Van Der Merwe
Elizabet Van Der Merwe
This study evaluated the capability of coal fly ash (untreated and physicochemically modified) when utilised as a filler in cis-1,4-polyisoprene rubber. Physicochemical modification of the ash was achieved using two techniques: (1) ammonium sulphate roasting followed by controlled aqueous dissolution and (2) sulphuric acid leaching. In addition, the effectiveness of a silane-coupling agent (Si-69) in enhancing the compatibility of untreated and physically modified ash samples with natural rubber was investigated. The ammonium sulphate roasting route increased the surface area and roughness and decreased the particle–particle agglomeration of the fly ash sample. Sulphuric acid treatment decreased the particle–particle agglomeration. However, no increase in surface roughness was observed. The untreated fly ash samples were not significantly reinforcing, and the properties they imparted were inferior to the least reinforcing carbon black. Silane treatment resulted in improved dispersion and wetting of the fly ash in the rubber matrix, leading to improved reinforcement compared to neat rubber. In situ addition of the silane during preparation of the vulcanisates led to composites with better mechanical properties than the composites containing silane-pre-treated fly ash. Composites filled with ammonium sulphate-roasted-and-leached ash performed better than the composites filled with untreated ash and sulfuric acid-leached ash. These findings suggest that modified fly ash holds promise as an effective filler for rubber materials, offering potential environmental and economic benefits by repurposing coal combustion by-products.

4 May 2021 in Transactions of the Royal Society of South Africa
Verified
Journal Article
Open access
AMAntonio Benjamim Mapossa
Antonio Benjamim Mapossa
MSMthoko Mayibongwe Sibanda
Mthoko Mayibongwe Sibanda
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
TKTaneshka Kruger
Taneshka Kruger
WFWalter Wilhelm Focke
Walter Wilhelm Focke
JWJames Wesley-Smith
James Wesley-Smith
Malaria remains a public health concern with vector control still the vital component of disease prevention, control, and elimination strategies. Recent years has seen a “stalling” in the progress made towards the reduction in the global malaria burden, highlighting the need to develop new, innovative, and safe alternative tools and delivery systems to achieve global malaria elimination. Interventions based on the use of indoor residual spraying (IRS) and long-life insecticidal bed nets (LLINs), i.e. insecticide-containing wall linings (IWLs), can contribute towards the reduction of malaria. Both LLINs and IWLs rely on the presence of insecticides on the fibre or filament surfaces. However, materials directly incorporating the insecticides into the polymer melt during extrusion, allows for effective killing of the mosquitoes when they come into contact with the surface of the material, only if there is insecticide present there. This means that the insecticide must migrate to the surface and precipitate there (bloom). Over time the internal concentration of insecticide will decay. This investigation was done using Fourier transform infrared spectroscopy (FTIR) in both the transmission and attenuated total reflection (ATR) modes to better understand the blooming of three World Health Organization-approved contact insecticides, i.e. alphacypermethrin, fipronil and chlorfenapyr, from mesh or film to better understand the likeliness of insecticides within the materials to migrate to the surface. Film-based samples were prepared in addition to wall lining mesh, because of their easier characterisation than the irregular shaped mesh filaments. FTIR, in ATR and in transmission modes, enabled the tracking of the migration of the three insecticides, over time to the surface of polyethylene mesh or film. This made it possible to estimate the apparent solubility of the insecticides in the polymer matrix. However, scanning electron microscopy (SEM) revealed that a portion of the insecticide is trapped, in a crystalline state, inside the polymer matrix. These results suggest the possibility of developing products-based insecticides for protection against infective mosquito bites in malaria-endemic regions.

9 May 2023 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
DMDennis Simbarashe Moyo
Dennis Simbarashe Moyo
EMElizabet Van Der Merwe
Elizabet Van Der Merwe
MRMelanie Rademeyer
Melanie Rademeyer
FMFrederick Pieter Malan
Frederick Pieter Malan
MAMaria T. Atanasova
Maria T. Atanasova
WFWalter Wilhelm Focke
Walter Wilhelm Focke
This manuscript reports the investigation of the polymorphic behaviour of fipronil using a systematic comparison of the thermochemical and structural properties of different crystal forms obtained in this study as well as those previously reported in literature. The analytical techniques employed include DSC, TGA, PXRD, SCXRD and hot stage microscopy. DSC proved particularly useful because it made it possible to differentiate between the two different crystal forms found in the as-received neat fipronil. The DSC scans revealed the presence of two polymorphs which had melting endotherms with peak maxima at ca. 196 °C and 205 °C, respectively. These polymorphs were successfully separated via sublimation and resulted in a metastable, lower melting polymorph in the sublimate and a thermodynamically stable, higher melting form in the sublimation residue. Clear evidence for the instability of the lower melting polymorph was found when the endotherms were examined under a range of heating rates. The proportion of the metastable form appeared to increase as the rate was increased, indicating that the metastable form underwent a solid–solid phase transition to the stable form at low heating rates. Recrystallization of fipronil from different solvents yielded five different forms. TGA curves revealed that all forms, except the acetone-derived one, were solvate pseudo-polymorphs that showed solvent loss between 60 and 100 °C. The acetone-derived sample was a hemihydrate that only started to show mass loss at 120 °C. SCXRD studies revealed that three of the five forms have similar structural characteristics, while the other two forms differ notably from each other and the rest of the structures. Despite these structural differences, all five forms exhibit near-identical intra- and intermolecular hydrogen bond networks.