The development of Phase Change Materials (PCMs) applications and products is closely related to the market penetration of the renewable energy technologies. With the initial aim of matching the phase shift between resource availability and demand in solar energy systems, the range of PCM applications expanded rapidly during the last decades, entering economic sectors where some form of passive thermal regulation was required. This review focuses on examining both conventional applications and recent advances and niche areas—such as space applications—where PCM-based systems demonstrated a potential to improve the operation at process level. The literature survey conducted here gave special attention to recent application of PCM-based systems such as data centres cooling and electric vehicles battery thermal management. Recent advances in PCM-based systems designs were surveyed in the second part of the article. The main PCM containment and system integration directions were discussed and recent representative studies were discussed. Some topics considered marginal but nevertheless essential to large scale implementation of PCM-based systems were mentioned and their coverage in the literature was assessed: health risks, environmental and lifecycle issues.

During a study aiming to recover strategic elements and minerals from coal fly ash and bottom ash (RAREASH and CHARPHITE projects funded, respectively, by the 2nd ERA-MIN and 3rd ERA-MIN Programs of the European Union Commission), it was found that in coal fly ash and bottom ash from Romania and Poland, several morphotypes did not fit into the general fly ash classifications, unless grouped together as “undifferentiated inorganics”. However, the combination of reflected light optical microscopy under oil immersion, scanning electron microscopy, and X-ray microanalysis (SEM/EDS) showed that many of these morphotypes not only have distinctive petrographic patterns but are also characterized by a chemical assemblage dominated by Ca, Mg, and P. In this paper, a survey of the literature is presented together with several detailed studies of samples from the RAREASH and CHARPHITE projects from which the following nomenclature are proposed: “calcispheres” for spongy Ca-rich morphotypes, “calcimagnesiaspheres” for (Ca + Mg)-rich morphotypes with visible MgO nodules and/or periclase (MgO) exsolved from Ca aluminate-silicate glass, and “magnesiaspheres” divided into “magnesiaferrospheres” for (Mg + Fe)-rich morphotypes with magnesioferrite, and “magnesiaoxyspheres” for magnesiaspheres mainly composed of (Mg + Fe)-rich amorphous material with visible MgO nodules and/or periclase.

Coal ash char concentrates from four countries (Portugal, Poland, Romania, and South Africa) were prepared, characterised, and graphitized under the scope of the Charphite project (Third ERA-MIN Joint Call (2015) on the Sustainable Supply of Raw Materials in Europe). Coal ash chars may be a secondary raw material to produce synthetic graphite and could be an alternative to natural graphite, which is a commodity with a high supply risk. The char concentrates and the graphitized material derived from the char concentrates were characterised using proximate analysis, X-ray fluorescence, X-ray diffraction (structural), Raman microspectroscopy, solid-state nuclear magnetic resonance, scanning electron microscopy, and petrographic analyses to determine if the graphitization of the char was successful, and which char properties enhanced or hindered graphitization. Char concentrates with a lower proportion of anisotropic particles and a higher proportion of mixed porous particles showed greater degrees of graphitization. It is curious to see that embedded Al₂O₃ minerals, such as glass and clay, influenced graphitization, as they most likely acted as catalysts for crystal growth in the basal direction. However, the graphitized samples, as a whole, do not compare well against a reference natural graphite sample despite some particles in select char concentrates appearing to be graphitized following graphitization.

Thermal control methods based on phase change materials have a wide range of applications, from thermal management to latent heat storage for renewable energy systems, with intermittent availability. Organic PCMs have some advantages over inorganics; however, their major drawback is flammability. In critical applications, such as buildings, electric vehicles, and aerospace applications, flammability is an issue that must be addressed in order to comply with safety standards. This review paper covers current studies assessing the PCM response to fire or excessive temperature, methods for ensuring flame retardancy, and their impact on the PCMs key characteristics: phase transition temperature range, latent heat, heat transfer rate, and compatibility with other system materials. A special focus is set on the preparation methods and the effectiveness of the flame-retardance achievement method. Some research gaps and further research directions are identified and discussed.