The goal of the tests was to separate a phosphate concentrate from ash and to assess its fertiliser use efficiency in anthropogenic land. Ash obtained from poultry manure incineration is an interesting fertiliser, as it contains both of the necessary nutrients, i.e., phosphorus and potassium. The ash selected for the tests contained 15.73 wt% P₂O₅, and 6.75 wt% K₂O. CaO also constituted the main component (44.79 wt%). Phosphorus in crystalline form was present as hydroxyapatite and carbonate apatite. The first stage, applied in order to separate a phosphate concentrate from ash, involved a number of physicochemical methods: (i) a method based on grain wettability differences; (ii) a method based on grain density differences; and (iii) methods based on size distribution differences. Wet sieving made it possible to separate a fraction with a P₂O₅ content of 24.56 wt%. The second stage, applied to assess fertiliser use efficiency, involved cassette tests as well as pot and field cultivation using as fertiliser, the obtained product as well as raw ash and commercial ones. Therefore, the conducted research allowed for the development of a methodology for the management of ash from the incineration of a poultry manure and their use as a substitute for phosphorus fertiliser. The tested material was applied in various doses. Using the obtained phosphate concentrate at a dose of 95 g/m³ resulted in a comparable yield as in the case of the commercial fertiliser at a dose recommended by the producer (75 g/m³). Unprocessed ash had to be used in larger amounts, i.e., 165 g/m³, to have a comparable yield as a commercial fertiliser.

During a study aiming to recover strategic elements and minerals from coal fly ash and bottom ash (RAREASH and CHARPHITE projects funded, respectively, by the 2nd ERA-MIN and 3rd ERA-MIN Programs of the European Union Commission), it was found that in coal fly ash and bottom ash from Romania and Poland, several morphotypes did not fit into the general fly ash classifications, unless grouped together as “undifferentiated inorganics”. However, the combination of reflected light optical microscopy under oil immersion, scanning electron microscopy, and X-ray microanalysis (SEM/EDS) showed that many of these morphotypes not only have distinctive petrographic patterns but are also characterized by a chemical assemblage dominated by Ca, Mg, and P. In this paper, a survey of the literature is presented together with several detailed studies of samples from the RAREASH and CHARPHITE projects from which the following nomenclature are proposed: “calcispheres” for spongy Ca-rich morphotypes, “calcimagnesiaspheres” for (Ca + Mg)-rich morphotypes with visible MgO nodules and/or periclase (MgO) exsolved from Ca aluminate-silicate glass, and “magnesiaspheres” divided into “magnesiaferrospheres” for (Mg + Fe)-rich morphotypes with magnesioferrite, and “magnesiaoxyspheres” for magnesiaspheres mainly composed of (Mg + Fe)-rich amorphous material with visible MgO nodules and/or periclase.

Coal ash char concentrates from four countries (Portugal, Poland, Romania, and South Africa) were prepared, characterised, and graphitized under the scope of the Charphite project (Third ERA-MIN Joint Call (2015) on the Sustainable Supply of Raw Materials in Europe). Coal ash chars may be a secondary raw material to produce synthetic graphite and could be an alternative to natural graphite, which is a commodity with a high supply risk. The char concentrates and the graphitized material derived from the char concentrates were characterised using proximate analysis, X-ray fluorescence, X-ray diffraction (structural), Raman microspectroscopy, solid-state nuclear magnetic resonance, scanning electron microscopy, and petrographic analyses to determine if the graphitization of the char was successful, and which char properties enhanced or hindered graphitization. Char concentrates with a lower proportion of anisotropic particles and a higher proportion of mixed porous particles showed greater degrees of graphitization. It is curious to see that embedded Al₂O₃ minerals, such as glass and clay, influenced graphitization, as they most likely acted as catalysts for crystal growth in the basal direction. However, the graphitized samples, as a whole, do not compare well against a reference natural graphite sample despite some particles in select char concentrates appearing to be graphitized following graphitization.

Streszczenie: Pierwiastki ziem rzadkich nazywane powszechnie REE (Rare Earth Elements) to grupa 15 lantanowców od lantanu do lutenu, a także skand i itr, które charakteryzują się podobnymi właściwościami chemicznymi. Stanowią surowce uznane przez Unię Europejską za jedne z listy 14 surowców krytycznych, o znaczeniu strategicznym dla rozwoju nowoczesnych wysoko zawansowanych technologii. Światowe wydobycie REE kształtuje się aktualnie na poziomie 139 tys. Mg, a głównym producentem są Chiny, które dostarczają około 93% światowego zapo­trzebowania na surowce ziem rzadkich W związku z sytuacją na światowym rynku metali ziem rzadkich (REE), w ostatnich latach rozpoczęto wiele projektów w celu poszukiwania nowych źródeł REE. W artykule omówiono znaczenie ziem rzadkich w gospodarce światowej. Głównym celem pracy było określenie potencjału i form występowania pierwiastków ziem rzadkich w węglach kamiennych i odpadach z energetycznego wykorzystania węgla, jako alternatywnego źródła ich pozyskania. Na podstawie analizy literatury oraz przeprowadzonych badań własnych wytypowanych próbek polskich węgli kamiennych i popiołów z elektrowni, przedstawiono zawartości pierwiastków ziem rzadkich REE w wybranych węglach i popiołach lotnych z elektrowni na świecie i w Polsce. Średnia zawartość £ REE w węglach na świecie wynosi 60 ppm natomiast w badanych węglach polskich z KWK Jankowice £ REE wynosiła 77 ppm, dla pozostałych węgli uzyskano niższe zawartości od 8 do 40 ppm. Ponadto praca przedstawia perspektywiczne światowe zasoby tych pierwiastków, które mogą stać się ich cennym, alternatywnym źródłem w ciągu najbliższych lat.

This paper presents the possibility of using sodium trithiocarbonate to remove heavy metals such as copper, nickel, and tin from industrial wastewater generated by the production of printed circuit boards (PCBs). Initial metal removal studies aimed at selecting an effective precipitant and optimizing the precipitation process were conducted on an laboratory scale. The smallest concentrations of copper, nickel, and tin in treated wastewater (Cu 0.09 mg/L, Ni 0.009 mg/L, Sn <0.005 mg/L) were obtained after using a stoichiometric sodium trithiocarbonate dose at pH 9.0-9.5. Optimizing the metal removal process was possible by using the surface response method to obtain a good adjustment of the experimental data to the data obtained from the model (R² = 0.9307, R² _adj. = 0.8845). The results of laboratory and model studies were used during industrial-scale testing in a wastewater treatment plant located in a PCB manufacturing plant. Optimization the wastewater treatment process on an industrial scale allowed us to obtain treated wastewater with very low copper (<0.005-0.014 mg/L), nickel (<0.005-0.008 mg/L), and tin (<0.005 mg/L) concentrations.

The aim of this study was to examine the physico-chemical and phase characteristics of ash obtained in the process of the combustion of Polish poultry manure in a laboratory reactor with a bubbling fluidized bed. Three experiments, differing in the grain size and morphology of the raw material, the method of its dosing and the type of fluidized bed, were carried out. The contents of the main chemical components and trace elements in the obtained ash samples were determined using WDXRF, and the phase composition was examined through the XRD method. The morphology and the chemical composition of grains in a given micro-area using the SEM/EDS method were also investigated. The highest concentration of phosphorus (from 28.07% wt. to 29.71% wt. as P₂O₅ equivalent), the highest proportion of amorphous substance (from 56.7% wt. to 59.0% wt.) and the lowest content of unburned organic substance (LOI from 6.42% to 9.16%) (i.e., the best process efficiency), was obtained for the experiment in which the starting bed was quartz sand and poultry manure was fed to the reactor in the form of pellets. It has been calculated that in this case, the amorphous phase contains more than half of the phosphorus. The method of carrying out the combustion process has a significant impact on the phase composition and, consequently, on the availability of phosphorus.