The Indonesian population is projected to increase by 66.65 in 2035 due to the continuous rise in urbanization globally. The growth contributed to the growing housing backlog and limited availability of residential spaces. This led to the evolution of incremental housing construction as an appropriate solution to residents’ needs. However, several factors hinder the implementation of incremental housing, including prolonged construction durations that delay the completion of an entire house, compromised quality of workmanship and materials, as well as poor flexibility. Conventional on-site construction, with concrete serving as the main material, led to prolonged construction time, difficult renovation, and untreatable waste. Preliminary studies have been conducted on incremental housing from urban development and financial perspectives, with none on alternative construction systems. Therefore, this study aimed to develop flexible and sustainable incremental housing with an assembly–disassembly system capable of reducing construction time and waste. This study experimented on the connection systems through digital simulations and prototypes leading to a construction system that combines frames and panels in a semi-volumetric system. It also combined a plug-and-play connection type to achieve the highest assembly–disassembly efficiency value (0.07), the lowest waste (below 25%), and a 30% shorter construction time. The result showed no displacement when tested with a load of up to 3 tons. This study contributed to the growing body of knowledge on alternative incremental house construction techniques, paving the way for more adaptable and environmentally responsible housing solutions in urban settings, particularly in rapidly urbanizing regions like Indonesia.
22 June 2023 in Journal of Sustainable Architecture and Civil Engineering
This study aims to reduce the lighting energy consumption in educational buildings while avoiding an increase in cooling load. The Faculty of Engineering building in Universitas Indonesia, Depok, West Java, Indonesia is used as a case study. Daylight optimization can have an impact on lighting energy, which is the largest energy consumer in educational buildings. However, given Indonesia’s tropical climate, daylight leading to heat gain is a concern. Current passive design interventions for controlling daylight and heat gain include light shelves, clerestories, and glazing materials. Daylighting performance is simulated using DIALux software. Results of each intervention are analyzed quantitatively and qualitatively by theories and parameters, namely illuminance level, light uniformity, and overall thermal transfer value (OTTV). Light shelves result in increased uniformity and lower OTTV. Clerestories result in increased average illuminance but higher OTTV. Active intervention with a dimming and grouping system is applied after daylight increases. The combination of passive design interventions and active dimming of electric lights reduces lighting energy with the same OTTV as existing. This study recommends the use of passive and active daylighting strategies considering their effect on the cooling load of buildings.