It is difficult to fabricate tubular-shaped tissues and organs (e.g., trachea, blood vessel, and esophagus tissue) with traditional biofabrication techniques (e.g., electrospinning, cell-sheet engineering, and mold-casting) because these have complicated multiple processes. In addition, the tubular-shaped tissues and organs have their own design with target-specific mechanical and biological properties. Therefore, the customized geometrical and physiological environment is required as one of the most critical factors for functional tissue regeneration. 3D bioprinting technology has been receiving attention for the fabrication of patient-tailored and complex-shaped free-form architecture with high reproducibility and versatility. Printable biocomposite inks that can facilitate to build tissue constructs with polymeric frameworks and biochemical microenvironmental cues are also being actively developed for the reconstruction of functional tissue. In this review, we delineated the state-of-the-art of 3D bioprinting techniques specifically for tubular tissue and organ regeneration. In addition, this review described biocomposite inks, such as natural and synthetic polymers. Several described engineering approaches using 3D bioprinting techniques and biocomposite inks may offer beneficial characteristics for the physiological mimicry of human tubular tissues and organs.

Dental implant surgeries involve the insertion of implant fixtures into alveolar bones to replace missing teeth. When the availability of alveolar bone at the surgical site is insufficient, bone graft particles are filled in the insertion site for successful bone reconstruction. Bone graft particles induce bone regeneration over several months at the insertion site. Subsequently, implant fixtures can be inserted at the recipient site. Thus, conventional dental implant surgery is performed in several steps, which in turn increases the treatment period and cost involved. Therefore, to reduce surgical time and minimize treatment costs, a novel hybrid scaffold filled with bone graft particles that could be combined with implant fixtures is proposed. This scaffold is composed of a three-dimensionally (3D) printed polycaprolactone (PCL) frame and osteoconductive ceramic materials such as hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP). Herein, we analyzed the porosity, internal microstructure, and hydrophilicity of the hybrid scaffold. Additionally, Saos-2 cells were used to assess cell viability and proliferation. Two types of control scaffolds were used (a 3D printed PCL frame and a hybrid scaffold without HA/β-TCP particles) for comparison, and the fabricated hybrid scaffold was verified to retain osteoconductive ceramic particles without losses. Moreover, the fabricated hybrid scaffold had high porosity and excellent microstructural interconnectivity. The in vitro Saos-2 cell experiments revealed superior cell proliferation and alkaline phosphatase assay results for the hybrid scaffold than the control scaffold. Hence, the proposed hybrid scaffold is a promising candidate for minimizing cost and duration of dental implant surgery.

The meniscus has poor intrinsic regenerative capability, and its injury inevitably leads to articular cartilage degeneration. Although there are commercialized off-the-shelf alternatives to achieve total meniscus regeneration, each has its own shortcomings such as individualized size matching issues and inappropriate mechanical properties. We manufactured a polycaprolactone-based patient-specific designed framework via a Computed Tomography scan images and 3D-printing technique. Then, we completed the hybrid-scaffold by combining the 3D-printed framework and mixture micro-size composite which consists of polycaprolactone and sodium chloride to create a cell-friendly microenvironment. Based on this hybrid-scaffold with an autograft cell source (fibrochondrocyte), we assessed mechanical and histological results using the rabbit total meniscectomy model. At postoperative 12-week, hybrid-scaffold achieved neo-meniscus tissue formation, and its shape was maintained without rupture or break away from the knee joint. Histological and immunohistochemical analysis results showed obvious ingrowth of the fibroblast-like cells and chondrocyte cells as well as mature lacunae that were embedded in the extracellular matrix. Hybrid-scaffolding resulted in superior shape matching as compared to original meniscus tissue. Histological analysis showed evidence of extensive neo-meniscus cell ingrowth. Additionally, the hybrid-scaffold did not induce osteoarthritis on the femoral condyle surface. The 3D-printed hybrid-scaffold may provide a promising approach that can be applied to those who received total meniscal resection, using patient-specific design and autogenous cell source.

Esophageal cancer (EC) is the eighth leading cause of cancer-related deaths globally, largely due to its late-stage diagnosis and aggressive progression. Esophagectomy remains the primary treatment, typically requiring organ-based reconstruction techniques such as gastric pull-up or colonic interposition. However, these reconstruction methods often lead to severe complications, significantly reducing the quality of life of patients. To address these limitations, tissue engineering has emerged as a promising alternative, offering bioengineered patch-type and tubular-type scaffolds designed to restore both structural integrity and functional regeneration. Recent advancements in three-dimensional (3D) biofabrication—including 3D bioprinting, electrospinning, and other cutting-edge techniques—have facilitated the development of patient-specific constructs with improved biocompatibility. Despite significant advancements, critical challenges persist in achieving mechanical durability, multilayered cellular organization, and physiological resilience post-transplantation. Ongoing research continues to address these limitations and enhance clinical applicability. Therefore, this review aims to examine recent advancements in esophageal tissue engineering, with a focus on key biofabrication techniques, preclinical animal models, and the major translational challenges that must be addressed for successful clinical application.

Glaucoma treatment involves reducing the intraocular pressure (IOP), which can damage the optic nerve, to a normal range. Aqueous drainage devices may be used for treatment, and a variety of devices have been proposed. However, they have a non-variable and uniform inner diameter, which makes it difficult to accommodate the IOP fluctuations that occur after glaucoma surgery. To ensure effective treatment in the early post-operative period with low IOP and the late post-operative period with high IOP, the inner diameter should be expandable over time to allow for smooth aqueous drainage. Here, we applied 3D printing technology with a tri-axial nozzle to develop an aqueous drainage tube that can expand its inner diameter. The distinct bilayer structure of the device allows it to expand its inner diameter through biodegradation, which can accommodate the IOP fluctuations that often occur after glaucoma surgery. The fabricated structure was evaluated in a series of tests, including leakage, cytotoxicity, and degradation experiments. The device did not show any leakage, was not toxic to cells, and demonstrated the expansion of the inner diameter through biodegradation. The device may provide a more effective post-operative solution for glaucoma patients by alleviating the effects of low IOP in the early post-operative period and high IOP in the late post-operative period.