Polycaprolactone (PCL) is one of the most widely used polymers in tissue engineering owing to its excellent biocompatibility, biodegradability, and processability. Nevertheless, most previous studies have primarily employed research-grade PCL, thereby limiting its clinical translation. In this study, four types of medical-grade PCL (RESOMER^® C203, C209, C212, and C217) were systematically evaluated for their applicability in three-dimensional (3D) printing, with respect to printability, mechanical characteristics, chemical stability, and biodegradation behavior. Among these, C209 and C212 exhibited superior printability and mechanical strength. FT-IR analysis showed that the chemical structure of PCL remained unchanged after both 3D printing and E-beam sterilization, while compressive testing demonstrated no significant differences in mechanical characteristics. In vitro degradation assessment revealed a time-dependent decrease in molecular weight. For kinetic analysis, both C209 and C212 were fitted using pseudo-first-order and pseudo-second-order models, which yielded comparable coefficients of determination (R²), suggesting that degradation may be governed by multiple factors rather than a single kinetic pathway. Taken together, these findings indicate that medical-grade PCL, particularly C209 and C212, is highly suitable for 3D printing. Furthermore, this study provides fundamental insights that may facilitate the clinical translation of PCL-based scaffolds for tissue engineering and biomedical implantation.

Esophageal cancer (EC) is the eighth leading cause of cancer-related deaths globally, largely due to its late-stage diagnosis and aggressive progression. Esophagectomy remains the primary treatment, typically requiring organ-based reconstruction techniques such as gastric pull-up or colonic interposition. However, these reconstruction methods often lead to severe complications, significantly reducing the quality of life of patients. To address these limitations, tissue engineering has emerged as a promising alternative, offering bioengineered patch-type and tubular-type scaffolds designed to restore both structural integrity and functional regeneration. Recent advancements in three-dimensional (3D) biofabrication—including 3D bioprinting, electrospinning, and other cutting-edge techniques—have facilitated the development of patient-specific constructs with improved biocompatibility. Despite significant advancements, critical challenges persist in achieving mechanical durability, multilayered cellular organization, and physiological resilience post-transplantation. Ongoing research continues to address these limitations and enhance clinical applicability. Therefore, this review aims to examine recent advancements in esophageal tissue engineering, with a focus on key biofabrication techniques, preclinical animal models, and the major translational challenges that must be addressed for successful clinical application.

Glaucoma treatment involves reducing the intraocular pressure (IOP), which can damage the optic nerve, to a normal range. Aqueous drainage devices may be used for treatment, and a variety of devices have been proposed. However, they have a non-variable and uniform inner diameter, which makes it difficult to accommodate the IOP fluctuations that occur after glaucoma surgery. To ensure effective treatment in the early post-operative period with low IOP and the late post-operative period with high IOP, the inner diameter should be expandable over time to allow for smooth aqueous drainage. Here, we applied 3D printing technology with a tri-axial nozzle to develop an aqueous drainage tube that can expand its inner diameter. The distinct bilayer structure of the device allows it to expand its inner diameter through biodegradation, which can accommodate the IOP fluctuations that often occur after glaucoma surgery. The fabricated structure was evaluated in a series of tests, including leakage, cytotoxicity, and degradation experiments. The device did not show any leakage, was not toxic to cells, and demonstrated the expansion of the inner diameter through biodegradation. The device may provide a more effective post-operative solution for glaucoma patients by alleviating the effects of low IOP in the early post-operative period and high IOP in the late post-operative period.