This article presents the results of laboratory tests conducted to identify the granulometric stabilization and chemical improvement techniques used in an experimental segment of the unpaved BR-030 highway in the Maraú Peninsula, Bahia. The segment was designed to evaluate the performance of primary coating sections stabilized with sand, clayey gravel, reclaimed asphalt pavement (RAP), and simple graded crushed stone (GCS), as well as chemically improved with Portland cement and hydrated lime. The laboratory campaign focused on mechanical resistance, resilient modulus, and permanent deformation tests. In this research, chemical improvement with the addition of 2% Portland cement presented the most promising results for potential application in the section of the BR-030 highway intended to remain unpaved. Additionally, a life cycle assessment (LCA) revealed that mechanical stabilization of the primary coating has the lowest environmental impacts, making it a suitable and sustainable option among stabilization methods.
The reuse of milled pavement material, known as RAP (Reclaimed Asphalt Pavement), represents one of the major current challenges in highway engineering worldwide. There is no doubt that the most valuable application of this residue is its use in the production of new hot asphalt mixtures, incorporating the highest possible RAP content, a process that requires adaptations in residue processing at asphalt plants. In Brazil, the RAP content added to these mixtures is limited to a maximum of 25%. Consequently, alternative applications have gained prominence in the country to increase RAP utilization in pavement engineering, such as its use in cold premixed asphalt mixtures. This study aimed to evaluate the performance of cold asphalt mixtures containing different RAP contents through mechanistic-empirical analyses of a reference pavement structure, using the modelling framework adopted in the Brazilian Asphalt Pavement Design Method (MeDiNa). After Marshall mix design and volumetric and mechanical characterization of mixtures containing 0%, 10%, 20%, 30%, and 40% RAP, stiffness and fatigue parameters were used to estimate the evolution of cracked area in the reference pavement, with each mixture applied as the surface layer under different traffic levels. The results demonstrated that pavement performance improved for all RAP contents evaluated compared to the mixture without RAP, with the mixture containing 30% RAP showing the best overall performance.
15 September 2025 in Geomechanics and Geoengineering
A fresagem é uma das técnicas mais utilizadas para manutenção e restauração de pavimentos asfálticos no Brasil. A aplicação dessa técnica gera volumes consideráveis de resíduos do revestimento antigo, conhecido como material fresado ou RAP (Reclaimed Asphalt Pavement), constituído, basicamente, de agregados diversos e ligante asfáltico envelhecido. Este trabalho é um estudo preliminar que avaliou a influência da idade de materiais fresados oriundos de três diferentes rodovias do Estado da Bahia, no comportamento mecânico de misturas asfálticas recicladas a quente produzidas em laboratório e dosadas com elevado percentual de RAP. Após a extração do ligante asfáltico foram realizados ensaios de granulometria do agregado obtido para determinação da curva granulométrica de cada RAP. Seguindo o método de dosagem Marshall, adicionou-se ao RAP agregados virgens e teores crescentes de CAP convencional para moldagem de corpos de prova para determinação da volumetria da mistura, além da estabilidade e fluência. Os resultados indicaram haver influência da idade do RAP na demanda por ligante asfáltico novo na dosagem da mistura reciclada.