The reuse of milled pavement material, known as RAP (Reclaimed Asphalt Pavement), represents one of the major current challenges in highway engineering worldwide. There is no doubt that the most valuable application of this residue is its use in the production of new hot asphalt mixtures, incorporating the highest possible RAP content, a process that requires adaptations in residue processing at asphalt plants. In Brazil, the RAP content added to these mixtures is limited to a maximum of 25%. Consequently, alternative applications have gained prominence in the country to increase RAP utilization in pavement engineering, such as its use in cold premixed asphalt mixtures. This study aimed to evaluate the performance of cold asphalt mixtures containing different RAP contents through mechanistic-empirical analyses of a reference pavement structure, using the modelling framework adopted in the Brazilian Asphalt Pavement Design Method (MeDiNa). After Marshall mix design and volumetric and mechanical characterization of mixtures containing 0%, 10%, 20%, 30%, and 40% RAP, stiffness and fatigue parameters were used to estimate the evolution of cracked area in the reference pavement, with each mixture applied as the surface layer under different traffic levels. The results demonstrated that pavement performance improved for all RAP contents evaluated compared to the mixture without RAP, with the mixture containing 30% RAP showing the best overall performance.
3 February 2025 in Contribuciones A Las Ciencias Sociales
The first Brazilian mechanistic-empirical method was developed for designing asphalt pavements (MeDiNa) between 2014 and 2018, involving 41 test sections implemented and monitored. However, the validation process of the MeDiNa transfer function involved 13 experimental sections. In this study, an experimental segment with a length of 220 meters was implemented on the BR-420 highway in Bahia state to test two asphalt pavement solutions, with soil-gravel and cement-improved soil base layers, and to verify the accuracy of MeDiNa in estimating the short-term evolution of crack area (CA) and rutting. After implementing the experimental sections, monthly data collection was conducted after traffic was allowed on the road to determine the evolution of functional and structural parameters of these two constructed pavement sections. Using the geotechnical material characterization data and the asphalt mixture used in this experimental segment, the MeDiNa software was utilized to estimate the CA and rutting evolutions month by month for a 10-year project horizon. After 12 months of monitoring, the results indicate that the estimated values of rutting in MeDiNa diverge from those found in the field, where the onset of this pathology has already been detected. However, the pavement fatigue phase has not yet begun. Therefore, the AT values estimated in the software in the short-term analysis are inconsistent with those observed in the field. In addition to the lack of calibration, other factors, such as traffic and different climates, impact the low predictability.
3 June 2014 in Journal of Control, Automation and Electrical Systems