Byrne, DJ, Browne, DT, Byrne, PJ, and Richardson, N. Interday reliability of the reactive strength index and optimal drop height. J Strength Cond Res 31(3): 721–726, 2017—The purpose of this study was to investigate the interday reliability of the reactive strength index (RSI) and optimal drop height (ODH) identification from multiple drop heights. Nineteen male trained hurling players (23.1 ± 2.9 years, 83.1 ± 15.5 kg, and 182.5 ± 4.89 cm) completed 2 maximal depth jumps from 4 incremental drop heights (30, 40, 50, and 60 cm), over 2 separate testing sessions 48 hours apart. The RSI and ODH were analyzed for reliability using intraclass correlation coefficient (ICC) and coefficient of variation (CV). The RSI and ODH both demonstrated good reliability with ICC ≥0.80 (0.87 and 0.81) and CV ≤10% (4.2 and 2.98), respectively. The results of this study support the use of an incremental depth jump protocol to find the RSI and ODH in trained hurlers. It is recommended that the incremental depth jump protocol be used when assessing an athlete's reactive strength, as it allows a reactive strength profile, maximum RSI, and an ODH to be determined, all of which can provide vital information when determining an athletes training intensity and load.
Training to meet match-play demands is a primary objective in an athlete’s preparation for their games. Despite camogie match-play running demands being available, how current training practices compare, specifically individual training components, remains unknown. This study aimed to investigate and compare current elite camogie training to match-play demands. Thirty-three (n = 33) elite camogie players wore 10 Hz Playertek GPS units during twenty-five training sessions and ten competitive matches. Training sessions were analysed using ball-in-play time and split into warm-ups, drills, small-sided games, running, and training matches. Metrics were converted into relative terms (per minute), to allow comparisons. Players cover significantly greater (p < 0.05) total distance (non-parametric standardised effect sizes (r = 0.45)), peak speed (r = 0.45), high-speed running (r = 0.13), sprint distance (r = 0.20), and total decelerations (r = 0.12–0.22) during match-play than training. Relatively, players cover significantly greater distance during running, small-sided games, and training matches compared to match-play (r = 0.21–0.29). Compared with match-play, running results in significantly greater high-speed running and sprint distance (r = 0.18–0.41), with greater accelerations (3–4 m∙s−2) during warm-ups, running, and small-sided games (r = 0.14–0.28). Current total training demands seem to fall behind match-play. However, relatively, training matches and small-sided games match or surpass competitive match-play demands. These findings may be utilised in preparing camogie teams for competition.
The aims of this study were to (i) estimate the intra- and inter-day reliability of mean concentric (CON) and eccentric (ECC) power at different inertial loads during a flywheel quarter-squat using a cluster set approach and (ii) to determine the acute effect of internal and external attentional focus on mean power when performing the flywheel quarter squat. Twelve collegiate field sport male athletes (age 22.4 ± 3.2 years, weight 81.4 ± 10.3 kg, height 1.81 ± 0.06 m) attended four cluster set testing sessions separated by 7 days. Sessions consisted of 4 sets of 15 repetitions using 4 inertial loads (0.025, 0.050, 0.075, and 0.100 kg·m2). A cluster block consisted of 5 repetitions, including “momentum repetitions” (4 × 5 + 5 + 5). Mean power (MP), CON power, ECC power, and ECC overload were recorded for both internal and external attentional focus groups. The external instructional group attained familiarization after two flywheel sessions (ES = 0.03–0.15) with little volatility between performance measures (CV% = 3.39–9.22). The internal instructional group showed large differences in MP output from session 2 to session 3 for all loads (ES = 0.59–1.25). In conclusion, the flywheel cluster set approach is a reliable training modality for maintaining MP output during all repetitions.
The aim of this study was to compare the acute effect of three cluster set (CS) intra-set rest intervals (15 s, 30 s, and 45 s) on mechanical performance measures during a flywheel resistance training session. Twelve amateur male field sport athletes attended three training measurement sessions (separated by 14 days of wash-out), consisting of four sets of nine repetitions (as cluster-blocks: 3 + 3 + 3), using a 0.050 kg·m−2 inertial load. The flywheel quarter-squat (QS) and the flywheel Romanian deadlift (RDL) were selected as resistance training exercises. Participants were randomly allocated different CS intra-set rest durations: 15 s, 30 s, or 45 s. The mean power (MP), peak concentric power (PPcon), peak eccentric power (PPecc), and eccentric overload (EO) were measured. A two-way (within–within) repeated-measures ANOVA reported that MP, PPcon, PPecc, and EO achieved similar values during the QS and RDL sessions involving 30 s and 45 s CS intra-set rest durations. It was noted that the first set did not always result in the greatest performance output for the 30 s and 45 s intervals. Compared to 15 s, the 30 s and 45 s CS intra-set rest durations showed greater MP, PPcon, and PPecc during set 2 (all p ≤ 0.05), set 3 (all p < 0.001), and set 4 (all p < 0.001) for both QS and RDL, and greater EO in the QS exercise (the four sets combined). Compared to shorter (15 s) cluster set intra-set rest intervals, longer (30–45 s) configurations allow greater physical performance outcome measures during flywheel QS and RDL resistance training sessions. The implications for longer-term interventions merit further research.
1 January 2021 in International Journal of Strength and Conditioning
The aim of this present study was to compare the reactive strength index (RSI) characteristics and trial to trial reliability of U17, U19 and Senior female international soccer players. Fifty – seven elite female soccer player participated in the study, (age: 18.1 + 3.1 years; height: 167.5 + 6.3 cm; weight: 61.84 + 7.7 kg). Participants performed 3 maximal repetitions of the 10/5 repeated jump test (10/5RJT) following a specific warm-up and familiarisation protocol. Senior players possessed higher levels of RSI with large effect size present when compared with the U17 (P= 0.043, ES = .97) and U19 (ES = 0.85) age groups. Trivial differences (ES = 0.17) in RSI existed between the U17 and U19 age categories. Trial-to-trial analyses demonstrated 10/5 RJT RSI to possess adequate levels of reliability with a range of mean coefficients of variance (CV) of 3.1 – 7.3 % and intraclass correlation (ICC) between 0.95 – 0.98 present across all three age groups. However, large variations in the between – athlete CV for RSI were revealed ranging from 1 – 27 %, 0.4 – 10.3%, and 1 – 7 % for U17, U19 and senior age groups respectively. These results suggest that age group can distinguish reactive strength capabilities. In addition, female international footballers with higher levels of RSI appear to produce more reliable measures of RSI via the 10/5 RJT.
The primary aim of this study was to investigate the intra- and inter-day reliability of flywheel cluster set training in concentric power (CON), eccentric power (ECC), and ECC overload during the Romanian deadlift exercise (RDL). A secondary aim was to assess the acute effect of internal and external attentional focus instructions on mean power when performing the flywheel RDL. Fourteen collegiate male field sport athletes (age, 23.3 ± 3.7 years; mass, 80.8 ± 9.9 kg; height, 1.79 ± 0.06 m) were randomized into internal (n = 7) or external (n = 7) attentional focus groups and attended four testing sessions, with a between-session separation of 7 days. Sessions consisted of four cluster sets of fifteen repetitions “excluding momentum repetitions” (4 × (5 + 5 + 5)) using a specific inertial load (0.025, 0.050, 0.075, and 0.100 kg·m−2) for a given set in a randomized ascending or descending order. Cluster sets were separated by a 45 s intra-set rest period. Both instructional focus groups attained familiarization, although the time taken to achieve familiarization (outcome stability) differed between groups. The external instructional group attained familiarization post-session 2 (Cohen’s d (ES), ES = 0.11–0.65) with little volatility between performance measures (CV% = 4.61–9.59). Additionally, the internal group reported inconsistencies among all inertial loads, reporting large differences in MP in the 0.100 kg·m−2 inertial load from day 2 to day 3 (ES = 1.22) and both 0.050 kg·m2 (p = 0.010) and 0.075 kg·m−2 (p = 0.016) between day 3 and day 4. The flywheel RDL cluster set approach is a reliable training modality for maintaining mean power output during cluster set repetitions.