Achieving the real mechanical performance of construction materials is significantly important for the design and engineering of structures. However, previous researchers have shown that contact friction performs an important role in the results of uniaxial compression tests. Strong discreteness generally appears in concrete-like construction materials due to the random distribution of the components. A numerical meso-scale finite-element (FE) method provides the possibility of generating an ideal material with the same component percentages and distribution. Thus, a well-designed meso-FE model was employed to investigate the effect of friction on the mechanical behavior and failure characteristics of concrete under uniaxial compression loading. The results showed that the mechanical behavior and failure profiles of the simulation matched well with the experimental results. Based on this model, the effect of friction was determined by changing the contact friction coefficient from 0.0 to 0.7. It was found that frictional contact had a slight influence on the elastic compressive mechanical behavior of concrete. However, the nonlinear hardening behavior of the stress–strain curves showed a fairly strong relationship with the frictional contact. The final failure profiles of the experiments showed a “sand-glass” shape that might be expected to result from the contact friction. Thus, the numerical meso-scale FE model showed that contact friction had a significant influence on both the mechanical performance and the failure profiles of concrete.
In this study, concrete was selected to investigate the real-time splitting tensile mechanical and fracture behaviours of brittle materials using the Brazilian test under concentrated and distributed boundary conditions. The digital image correlation (DIC) method was adopted to evaluate the tensile strength and failure process in Brazilian tests using a high-resolution camera. The DIC results showed that the position of the crack initiation randomly occurred at the centre of a disc and at the boundary in Brazilian tests with concentrated loads (BTC). Comparatively, the crack initiated at the centre of discs in most Brazilian tests with distributed loads (BTD), as validated by the DIC results. Our results indicated that the average nominal tensile strength of specimens cracking at the boundary was larger than that of specimens cracking at the centre in the BTC, suggesting that the nominal tensile strength measured by the Brazilian test was related to the failure process of the discs. Moreover, this study demonstrated that the tensile strength measured by the Brazilian test was dependent on the boundary conditions. The equation recommended by the ISRM (International Society for Rock Mechanics) might slightly overestimate the tensile strength of brittle materials based on the pure elastic theory and hyperbolic-distributed loading conditions at the boundaries.
Obtaining reliable dynamic mechanical properties through experiments is essential for developing and validating constitutive models in material selection and structural design. This study introduces a dynamic tensile method using a modified M-type specimen loaded by a split Hopkinson pressure bar (SHPB). A closed M-type specimen was thus employed. Finite element simulations and experiments were used to validate the design of the M-type specimen, which was fabricated using 17-4PH (precipitation hardening) stainless steel powder with a 3D (three-dimensional) selected laser melting (SLM) printer. After verifying force balance and uniform deformation in the tensile region, tensile tests were conducted across strain rates from quasi-static to a strain rate of 5900 s−1. The results demonstrated that this method effectively assessed the dynamic tensile behaviors of stainless steel at high strain rates, and achieved both ultra-high strain rates and large plastic deformation.