Jimena Gómez-Delgado

Dr. Jimena Gómez-Delgado

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2026 in ACS Omega
Verified
Journal Article
Open access
JGJimena Gómez-Delgado
Jimena Gómez-Delgado
AOAndres Felipe Ortiz
Andres Felipe Ortiz
JJJavier Jaimes
Javier Jaimes
RMRaúl Andrés Martinez-Lopez
Raúl Andrés Martinez-Lopez
NSNicolás Santos-Santos
Nicolás Santos-Santos
EMEnrique Mejía-Ospino
Enrique Mejía-Ospino
Increasing the recovery factor in oil fields is a critical task for improving reservoir performance and energy sustainability. This study investigates the novel application of graphene oxide (GO) nanoparticles as an enhanced oil recovery (EOR) agent in heavy oilfields, with an integrated multiscale approach combining laboratory experiments and numerical reservoir simulation. The nanofluids were optimized by evaluating the influence of salinity (300–900 ppm), pH (4–8), and GO concentrations (0.03–0.09 wt %) on interfacial tension (IFT) and wettability. Under optimal conditions (900 ppm brine, pH 8, and 0.09 wt % GO), the IFT decreased from 32.5 to 15.8 mN/m, and the contact angle shifted from 140° (oil-wet) to 90° (intermediate). Coreflooding tests confirmed the EOR potential of GO nanofluids, achieving 63.60% oil recovery compared to 56.72% with conventional waterflooding, an incremental gain of 7%. Relative permeability curves and advanced wettability indices (Lak and modified Lak) validated wettability alteration effects. To evaluate the scalability of this technology, the experimental data were incorporated into a numerical simulation using CMG-STARS. First, a history-matched core-scale model was developed to reproduce laboratory results. Then, a conceptual reservoir model was constructed using representative petrophysical properties from Colombian fields. The reservoir-scale simulation showed that nano-GO injection could yield an additional 402,431 barrels of oil over a 20-year period compared to conventional waterflooding, while maintaining a more favorable water cut. These findings highlight the potential of GO nanofluids as a viable and scalable EOR strategy for heavy-oil reservoirs. Future studies will focus on field-scale validation, economic feasibility, and environmental impact.

6 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
JGJimena Gómez-Delgado
Jimena Gómez-Delgado
NNNelson Gutierrez Niño
Nelson Gutierrez Niño
LCLuis Felipe Carrillo-Moreno
Luis Felipe Carrillo-Moreno
RMRaul Martinez-Lopez
Raul Martinez-Lopez
NSNicolás Santos Santos
Nicolás Santos Santos
EMEnrique Mejía-Ospino
Enrique Mejía-Ospino
The depletion of conventional oil reserves has intensified the search for enhanced oil recovery (EOR) techniques. Recently, nanoparticle research has focused on graphene oxide-based materials, revealing a critical challenge in their practical application. Laboratory investigations have consistently demonstrated that these nanoparticles have significant potential for formation damage, a critical limitation that substantially constrains their potential field implementation. This research addresses a critical challenge in EOR: developing magnetic graphene oxide nanoparticles (MGONs) that can traverse rock formations without causing formation damage. MGONs were synthesized and stabilized in formation brine with a high total dissolved solids (TDS) content with a xanthan gum polymer. Two coreflooding experiments were conducted on sandstone cores. The first experiment on high-permeability sandstone (843 mD) showed no formation damage; instead, permeability increased to 935 mD after MGON injection. Irreducible water saturation (Swirr) and residual oil saturation (Sor) were 25.1% and 31.5%, respectively. The second experiment on lower-permeability rock (231.3 mD) evaluated nanoparticle retention. The results showed that 0.09511 mg of MGONs was adsorbed per gram of rock under dynamic conditions. Iron concentration in effluents stabilized after 3 pore volumes, indicating steady-state adsorption. The successful synthesis, stability in high-TDS brine, favorable interfacial properties, and positive effects observed in coreflooding experiments collectively highlight MGONs’ potential as a viable solution for enhancing oil recovery in challenging reservoirs, without causing formation damage.

7 November 2025 in Energies
Verified
Journal Article
Open access
PDF file
PLPaola A. León
Paola A. León
AOAndrés Felipe Ortiz
Andrés Felipe Ortiz
JGJimena Gómez-Delgado
Jimena Gómez-Delgado
DBDaniela Barrera
Daniela Barrera
Fabián HernándezFabián Hernández
Fabián Hernández
EMEnrique Mejía-Ospino
Enrique Mejía-Ospino
Electromagnetic heating (EMH) using microwaves has emerged as a promising enhanced oil recovery (EOR) technique, particularly for heavy crude oils where conventional thermal methods encounter technical and environmental challenges. However, its large-scale implementation remains limited due to incomplete understanding of its energy transfer mechanisms. This study proposes an experimental–numerical approach integrating magnetic graphene oxide nanoparticles (Fe3O4@GO) with microwave heating to enhance energy absorption near the wellbore. The nanomaterial was synthesized via a modified Hummer’s method followed by in situ magnetite precipitation and studied through multiple material characterization techniques showing uniform 80 nm particles with superparamagnetic behavior—ideal for EMH applications. Nine experiments were conducted on sand–heavy-oil–water systems with nanoparticle concentrations up to 500 ppm using a laboratory microwave heating prototype. A simulation model was then developed in CMG-STARS for history matching to estimate energy absorption as a function of saturation and nanoparticle concentration. Experiments reached temperatures up to 240 °C, with 653 MJ of effective heat transferred to the target zone over 55 h, as estimated from the input heat required in the simulator for history matching. The results confirm that magnetic graphene oxide nanoparticles enhance thermal efficiency and heat distribution in microwave-assisted EOR.

2 November 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
JGJimena Gómez-Delgado
Jimena Gómez-Delgado
NNNelson Gutierrez Niño
Nelson Gutierrez Niño
LCLuis Carrillo-Moreno
Luis Carrillo-Moreno
RMRaul Martinez-Lopez
Raul Martinez-Lopez
NSNicolás Santos Santos
Nicolás Santos Santos
EMEnrique Mejía-Ospino
Enrique Mejía-Ospino
The depletion of conventional oil reserves has intensified the search for enhanced oil recovery (EOR) techniques. This research investigates the synthesis and application of magnetic graphene oxide nanoparticles (MGONs) for EOR in heavy crude oil reservoirs. MGONs were synthesized and stabilized in high-total dissolved solids (TDS) formation brine with xanthan gum polymer. Two coreflooding experiments were conducted on sandstone cores. The first experiment in high-permeability sandstone (843 mD) showed no formation damage; instead, permeability increased to 935 mD after MGON injection. Irreducible water saturation (Swirr) and residual oil saturation (Sor) were 25.1% and 31.5%, respectively. The second experiment in lower-permeability rock (231.3 mD) evaluated nanoparticle retention. Results showed 0.09511 mg of MGON adsorbed per gram of rock under dynamic conditions. Iron concentration in effluents stabilized after 3 pore volumes, indicating steady-state adsorption. The successful synthesis, stability in high-TDS brine, favorable interfacial properties, and positive effects observed in coreflooding experiments collectively highlight MGONs' potential as a viable solution for enhancing oil recovery in challenging reservoirs, without causing formation damage.

3 August 2026 in ACS Omega
Verified
Journal Article
Open access
VPValentina Parra-Henao
Valentina Parra-Henao
JAJulian Anaya-Florez
Julian Anaya-Florez
NSNicolás Santos-Santos
Nicolás Santos-Santos
JGJimena Gómez-Delgado
Jimena Gómez-Delgado
The injection of CO2 into deep geological formations induces geochemical interactions that may modify reservoir petrophysical properties and influence the long-term performance of carbon capture and storage (CCS) projects. This experimental study evaluates the effects of CO2 injection on sandstone and limestone through an integrated petrophysical and physicochemical characterization, including X-ray diffraction (XRD), computed tomography (CT), coreflooding experiments, and fluid compatibility analyses. A distinguishing aspect of this research lies in its focus on the Mugrosa Formation (Colombia), using a representative core sample (sandsotne) and a synthetic brine formulated to replicate the composition of field-produced formation water, thereby reproducing realistic reservoir conditions. Results indicate that limestone exhibited a 6% increase in porosity and a 57% reduction in permeability due to calcium mineral dissolution and the formation of preferential flow pathways (wormholes) identified by CT imaging. In contrast, sandstone showed no significant changes in porosity, permeability, or mineralogical composition following CO2 exposure. Brine analyses revealed greater CO2 dissolution at lower temperatures, promoting carbonic acid formation and enhancing mineral dissolution processes in limestone. Furthermore, CO2–oil compatibility tests showed increased oil viscosity, suggesting destabilization of heavy hydrocarbon fractions and potential asphaltene precipitation under immiscible conditions. These results demonstrate that the response of the rock–fluid system to CO2 injection is strongly controlled by mineralogical composition and suggest that sandstones are a better candidate for long-term carbon capture and storage processes, while limestones may present a greater risk of petrophysical alteration and loss of permeability.