The depletion of conventional oil reserves has intensified the search for enhanced oil recovery (EOR) techniques. Recently, nanoparticle research has focused on graphene oxide-based materials, revealing a critical challenge in their practical application. Laboratory investigations have consistently demonstrated that these nanoparticles have significant potential for formation damage, a critical limitation that substantially constrains their potential field implementation. This research addresses a critical challenge in EOR: developing magnetic graphene oxide nanoparticles (MGONs) that can traverse rock formations without causing formation damage. MGONs were synthesized and stabilized in formation brine with a high total dissolved solids (TDS) content with a xanthan gum polymer. Two coreflooding experiments were conducted on sandstone cores. The first experiment on high-permeability sandstone (843 mD) showed no formation damage; instead, permeability increased to 935 mD after MGON injection. Irreducible water saturation (Swirr) and residual oil saturation (Sor) were 25.1% and 31.5%, respectively. The second experiment on lower-permeability rock (231.3 mD) evaluated nanoparticle retention. The results showed that 0.09511 mg of MGONs was adsorbed per gram of rock under dynamic conditions. Iron concentration in effluents stabilized after 3 pore volumes, indicating steady-state adsorption. The successful synthesis, stability in high-TDS brine, favorable interfacial properties, and positive effects observed in coreflooding experiments collectively highlight MGONs’ potential as a viable solution for enhancing oil recovery in challenging reservoirs, without causing formation damage.
This work presents a method for rock porosity prediction from the X-ray computed tomography (CT) logs obtained using a double energy approach, bulk density (RHOB) and photoelectric factor (PEF). The proposed method seeks to correlate the known porosity from the Routine Core Analysis (RCAL) with RHOB and PEF high-resolution logs, as the response of these two measurements depends on the volumetric quantity of different rock materials and of the volume of its porous space. Artificial Neural Networks (ANNs) are trained so they can predict porosity from CT logs at a high resolution (0.625 mm). The ANNs validation and regression plots show that porosity predictions are good. High-resolution porosity models linked to CT images could contribute to enhancing the petrophysics model as they allow a more refined identification of intervals of interest due to the detailed measurement.
Electromagnetic heating (EMH) using microwaves has emerged as a promising enhanced oil recovery (EOR) technique, particularly for heavy crude oils where conventional thermal methods encounter technical and environmental challenges. However, its large-scale implementation remains limited due to incomplete understanding of its energy transfer mechanisms. This study proposes an experimental–numerical approach integrating magnetic graphene oxide nanoparticles (Fe3O4@GO) with microwave heating to enhance energy absorption near the wellbore. The nanomaterial was synthesized via a modified Hummer’s method followed by in situ magnetite precipitation and studied through multiple material characterization techniques showing uniform 80 nm particles with superparamagnetic behavior—ideal for EMH applications. Nine experiments were conducted on sand–heavy-oil–water systems with nanoparticle concentrations up to 500 ppm using a laboratory microwave heating prototype. A simulation model was then developed in CMG-STARS for history matching to estimate energy absorption as a function of saturation and nanoparticle concentration. Experiments reached temperatures up to 240 °C, with 653 MJ of effective heat transferred to the target zone over 55 h, as estimated from the input heat required in the simulator for history matching. The results confirm that magnetic graphene oxide nanoparticles enhance thermal efficiency and heat distribution in microwave-assisted EOR.
This study presents a comprehensive experimental evaluation of pure methane (CH4) and carbon dioxide (CO2) adsorption on organic-rich shale samples from the Cesar-Ranchería Basin, Colombia. Adsorption isotherms were measured at two temperatures (50 °C and 80 °C) and up to 3 MPa using a manometric method. The data were fitted using the Langmuir model. The samples exhibit high total organic carbon (TOC) contents, ranging from 33.44% to 69.63%, but surprisingly low BET surface areas (1–7 m2/g), an uncommon combination in shale systems. Despite these low surface areas, the samples showed notable adsorption capacities, particularly for CO2, which consistently outperformed CH4 across all conditions. Maximum CO2 adsorption capacities reached up to 1.6 mol/kg, while CH4 values peaked at 0.49 mol/kg. The Langmuir parameters reflect a stronger affinity and greater capacity for CO2, supporting its potential role in enhanced gas recovery and CO2 sequestration. These findings contribute to understanding gas–shale interactions in thermally immature and highly organic-rich formations and highlight the importance of mineralogy and organic matter characteristics beyond surface area alone. This work provides novel insights into the adsorption behavior of Colombian shales and serves as a valuable reference for future gas in-place estimations and shale reservoir evaluations in similar geological contexts.
30 December 2024 in Ct&f - Ciencia, Tecnología Y Futuro
The management of produced water is a significant environmental challenge, particularly considering the goal to achieve 'Water Neutrality' by 2045, which requires the entire elimination of discharges into water bodies. In Colombia, discharged water currently accounts for over 30% of total water production, approximately 80 million m3, which adversely affect various ecosystems. Moreover, the economic implications are substantial, as each barrel of produced water represents a significant quantity of unextracted oil, impacting the fields’ profitability. To address this issue, various stimulation methods have been used to mitigatewater production. This study is intended to assess the efficacy of these techniques in reducing water production and improving environmental management.The Universidad Industrial de Santander, through its specialized services to the hydrocarbon industry, has conducted numerous assessments of relative permeability modifier (RPM) treatments across diverse scenarios and conditions. These evaluations have revealed high reduction in water permeabilities of up to 90%, effectively curbing water contributions from producer wells. This approach not only yields tangible benefits for companies by averting treatment costs, but also translates into environmental benefits through reduced water discharge.In this study, we leverage this expertise to assess the potential impact of RPM treatments on water production. By analyzing changes in relative permeability curves via reservoir simulation, we aim to estimate the prospective decrease in water production and, consequently, the reduction in oil industry discharges in Colombia prior to a widespread implementation of this technique.
This study presents experimental adsorption–desorption data of CH4 and CO2 on shale samples from the Cesar-Ranchería Basin, Colombia, a region with limited characterization of gas–rock interactions under reservoir-relevant conditions. The work addresses the behavior of early-mature shales, contributing to the understanding of gas retention mechanisms in tropical basins. Adsorption–desorption isotherms were obtained using a high-pressure manometric system at 50 °C and 80 °C, with pressures up to 3 MPa, and were fitted using the Langmuir model. The results show a consistently higher adsorption capacity for CO2 compared to CH4 across all conditions, along with a clear decrease in adsorption capacity with increasing temperature, confirming the exothermic nature of the process. No hysteresis was observed, indicating fully reversible adsorption dominated by physisorption mechanisms. The integration of adsorption data with mineralogical, BET surface area, and geochemical characterization provides insight into the factors controlling gas retention in early-mature shales. The results highlight the combined influence of surface area, organic matter, and clay mineralogy on adsorption performance, and demonstrate that CO2 exhibits a stronger affinity for the shale matrix under all tested conditions. These findings contribute experimental evidence of gas adsorption behavior in an underexplored basin and provide a reference framework for evaluating gas storage potential in similar geological settings.