Qin Pan

Dr. Qin Pan


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JYJinmeng Yu
Jinmeng Yu
AZAqun Zheng
Aqun Zheng
LJLu Jin
Lu Jin
YWYong Wu
Yong Wu
QPQin Pan
Qin Pan
杨孙杨 孙
杨 孙
The C-3 functionalization of 1H-indazole could produce a lot of highly valuable pharmaceutical precursors, which could be used for the treatment of cancer and many other inflammatory diseases. This work was focused on the C-3 functionalization of 1H-indazole through Suzuki–Miyaura cross-coupling of 3-iodo-1H-indazole with organoboronic acids, catalyzed by various palladium catalysts immobilized over imidazolium ionic liquids, as well as catalyst recycling. A series of reaction parameters, including the substrate, catalyst, and ionic liquid, were fully investigated. It is significant to note that the yields of the present Suzuki–Miyaura cross-coupling were mainly determined by the catalyst and the solvent used, more than the chemical structure of the substrate. Furthermore, ferrocene-based divalent palladium complexes showed better catalytic outputs compared to simple palladium salts. Moreover, using two imidazolium ionic liquids, BMImX (BMIm+ = 1-n-butyl-3-methylimidazolium, X− = BF4−, PF6−) not only improved the yields of cross-coupled products, but also avoided the formation of Pd(0) black, as compared to the non-ionic liquid facilitated reactions, and simultaneously making catalyst recycling more effective. On average, BMImBF4 performed better than BMImPF6. Additionally, scientific calculations revealed that 1,1′-bis(diphenylphosphino)ferrocene-palladium(II)dichloride dichloromethane complex (PdCl2(dppf)) showed a lower energy barrier in the formation of intermediates than [1,1′-bis(di-tert-butylphosphino)ferrocene]dichloropalladium(II) (PdCl2(dtbpf)), leading to higher catalytic outputs. This work may contribute to the development of 1H-indazole-derived new pharmaceuticals.

20 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JMJinyi Ma
Jinyi Ma
YWYong Wu
Yong Wu
QPQin Pan
Qin Pan
XWXiangdong Wang
Xiangdong Wang
XLXiaoyong Li
Xiaoyong Li
杨孙杨 孙
杨 孙
The Baeyer-Villiger Oxidation (BVO) of ketones and aldehydes produce lactones and formates, while aerobic carboxylation of aldehydes manufactures carboxylic acids, both having high added value. This work prepared a series of Al-containing silicates modified with organic ligands and SnO2 nanoparticles, which were then employed as catalyst in BVO and carboxylation. Characterizations revealed the morphology of the synthesized catalyst was changed from micron-sized thin sheets to smaller blocks, and then to uniform nanoparticles (size of 50 nm) having the doped SnO2 nanoparticles with a size of 29 nm. All catalysts showed high BET surface areas featuring silt-like mesopores. In determining the priority of BVO and carboxylation, an influence evaluation of the parameters showed the order to be substrate > oxidant > solvent > catalyst. Cyclic aliphatic ketones were suitable for BVO, but linear aliphatic and aromatic aldehydes for carboxylation. Coordination of (S)-binaphthol or doping of Sn into catalyst showed little influence on BVO under m-CPBA, but the Sn-doped catalyst largely increased BVO under (NH4)2S2O8 and H2O2. Calculations revealed that the catalyst containing both Al and Sn could give BVO intermediates lower energies than the Sn-beta zeolite model. The present system exhibited merits including wider substrate scope, innocuous catalytic metal, greener oxidant, as well as lower catalyst cost.

20 October 2023 in Molecules
Verified
Journal Article
Open access
PDF file
QPQin Pan
Qin Pan
YWYong Wu
Yong Wu
AZAqun Zheng
Aqun Zheng
XWXiangdong Wang
Xiangdong Wang
XLXiaoyong Li
Xiaoyong Li
杨孙杨 孙
杨 孙
The C-3 modification of 1H-indazole has produced active pharmaceuticals for the treatment of cancer and HIV. But, so far, this transformation has seemed less available, due to the lack of efficient C-C bond formation at the less reactive C-3 position. In this work, a series of silica gel-supported PdO2 nanoparticles of 25–66 nm size were prepared by ball milling silica gel with divalent palladium precursors, and then employed as catalysts for the Suzuki–Miyaura cross-coupling of 1H-indazole derivative with phenylboronic acid. All the synthesized catalysts showed much higher cross-coupling yields than their palladium precursors, and could also be reused three times without losing high activity and selectivity in a toluene/water/ethanol mixed solvent. Although the palladium precursors showed an order of activity of PdCl2(dppf, 1,1′-bis(diphenylphosphino)ferrocene) > PdCl2(dtbpf, 1,1′-bis(di-tert-butylphosphino)ferrocene) > Pd(OAc, acetate)2, the synthesized catalysts showed an order of C1 (from Pd(OAc)2) > C3 (from PdCl2(dtbpf)) > C2 (from PdCl2(dppf)), which conformed to the orders of BET (Brunauer–Emmett–Teller) surface areas and acidities of these catalysts. Notably, the most inexpensive Pd(OAc)2 can be used as a palladium precursor for the synthesis of the best catalyst through simple ball milling. This work provides a highly active and inexpensive series of catalysts for C-3 modification of 1H-indazole, which are significant for the large-scale production of 1H-indazole-based pharmaceuticals.

27 April 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
JMJinyi Ma
Jinyi Ma
AZAqun Zheng
Aqun Zheng
QPQin Pan
Qin Pan
YWYong Wu
Yong Wu
XWXiangdong Wang
Xiangdong Wang
杨孙杨 孙
杨 孙
The Baeyer–Villiger oxidation (BVO) of ketone and aldehyde can produce ester and formate, which both have wide applications in many areas. In this work, a series of Sn-containing silicates were prepared through the sol-gel process by using structure-directing and crystallizing agents and post-synthetic coordinated modification of binaphthol. Characterizations revealed that loading of (L)-sodium lactate as the crystallizing agent decreased the crystal size of the synthesized catalyst, and there were SnO2 nanoparticles with sizes of 17–19 nm on the catalyst. Furthermore, quite differently from the 3D mesoporous structure of classical Sn-beta zeolites, the synthesized catalysts had a silt-like mesoporous structure. In the catalysis, when cyclic aliphatic ketones were used as the substrate, only BVO-type products and corresponding ring-opening products were obtained. BVO of aliphatic aldehyde produced both an aerobic oxidation product (carboxylic acid) and a BVO-type product. The presented transformation of aromatic aldehyde (benzaldehyde) only gave an aerobic oxidation product (benzoic acid). The post-synthetic coordinating attachment of (S)-binaphthol to the Sn-containing silicate backbone worsened the BVO of aliphatic ketones but improved the BVO of aliphatic aldehyde and the aerobic oxidation of aromatic aldehyde. In addition, this work also developed two new routes for the synthesis of high-value-added 6-hydroxyhexanoic acid and cyclohexylformate under catalytic BVO conditions.

2 January 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
QPQin Pan
Qin Pan
QJQin-Xiang JIA
Qin-Xiang JIA
Jin XieJin Xie
Jin Xie
XLXiaoyong Li
Xiaoyong Li
YWYong Wu
Yong Wu
KPKewei Peng
Kewei Peng
Potassium hexatitanate whiskers are prepared and characterized in this study. The reinforcement of polyethylene with potassium hexatitanate whiskers is also investigated. The potassium hexatitanate whiskers are prepared through the calcination of TiO2 and K2CO3 at 1000 °C. It is determined that a polyvinylpyrrolidone additive is crucial for the formation of slender rod-like structures with smooth and flat surfaces and a high length-to-diameter ratio. For the surface modification of the whiskers, γ-aminopropyl triethoxysilane has been identified as the most effective coupling agent for enhancing mechanical properties. The whiskers have little change in shape after surface modification, and the majority of the whiskers still retain a considerable length-to-diameter ratio. The results of mechanical tests indicate that the tensile strength and the modulus of elasticity, as well as the shear strength and the shear elasticity, are enhanced to some extent. The tensile strength and the modulus of elasticity increase by 18.6% and 3.6%, respectively. The modified polyethylene composites show enhanced softness and elasticity. The elongation at the break for the prepared PE/PHT-2-1 composites increases significantly to 38.1%, significantly exceeding that of unfilled polyethylene (6.84%). Nevertheless, a suitable method is established for reinforcing thermoplastic polymers using inexpensive potassium hexatitanate whiskers.

19 November 2024 in Molecules
Verified
Journal Article
Open access
PDF file
SCSidra Chaudhary
Sidra Chaudhary
QPQin Pan
Qin Pan
YWYong Wu
Yong Wu
ZBZainab Bibi
Zainab Bibi
XLXiaoyong Li
Xiaoyong Li
杨孙杨 孙
杨 孙
A series of Fe–Ba mixed oxides, including a pure Fe-containing sample as a reference, have been synthesized via a sol–gel process using Fe3+ or Fe2+ salts and BaSO4 as raw materials, with Pluronic P123 serving as a template. These oxides have been thoroughly characterized and subsequently utilized as catalysts for the chlorination of various organic molecules. Commercial hydrochloric acid, known for its relative safety, and environmentally friendly aqueous hydrogen peroxide were employed as the chlorine source and oxidant, respectively. The pure Fe-containing catalyst displays excellent thermal stability between 600 and 800 °C and exhibited moderate to high conversions in the chlorination of toluene, benzene, and tert-butyl hydroperoxide, with remarkable ortho-selectivity in chlorination of toluene. The combination of Fe3+ salt with BaSO4 in the sol–gel process results in a Fe–Ba mixed oxide catalyst composed of BaO2, BaFe4O7, and Fe2O3, significantly enhancing the chlorination activity compared to that displayed by the pure Fe catalyst. Notably, the chlorination of tert-butyl hydroperoxide (TBHP) does not require additional oxidants such as H2O2, and involves both electrophilic substitution and nucleophilic addition. Notably, the chlorination of bromobenzene yields chlorobenzene as the sole product, a transformation that has not been previously reported. Overall, this catalytic chlorination system holds promise for advancing the chlorination industry and enhancing pharmaceutical production.