The world is increasingly turning to renewable energy sources (RES) to address climate change issues and achieve net-zero carbon emissions. Integrating RES into existing power grids is necessary for sustainability because the unpredictability and irregularity of the RES can affect grid stability and generate power quality issues, leading to equipment damage and increasing operational costs. As a result, the importance of RES is severely compromised. To tackle these challenges, traditional power systems (TPS) will have to become more innovative. Smart grids use advanced technology such as two-way communication between consumers and service providers, automated control, and real-time monitoring to manage power flow effectively. Inverters are effective tools for solving power quality problems in renewable-powered smart grids. However, their effectiveness depends on topology, control method and design. This review paper focuses on the role of multilevel inverters (MLIs) in mitigating power quality issues such as voltage sag, swell and total harmonics distortion (THD). The results shown here are through simulation studies using DC sources but can be extended to RES-integrated smart grids. The comprehensive review also examines the drawbacks of TPS to understand the importance and necessity of developing a smart power system. Finally, the paper discusses future trends in MLI control technology, addressing power quality problems in smart grid environments.
The battery State of Charge (SoC) estimation is one of the basic and significant functions for Battery Management System (BMS) in Electric Vehicles (EVs). The SoC is the key to interoperability of various modules and cannot be measured directly. An improved Extended Kalman Filter (iEKF) algorithm based on a composite battery model is proposed in this paper. The approach of the iEKF combines the open-circuit voltage (OCV) method, coulomb counting (Ah) method and EKF algorithm. The mathematical model of the iEKF is built and four groups of experiments are conducted based on LiFePO4 battery for offline parameter identification of the model. The iEKF is verified by real battery data. The simulation results with the proposed iEKF algorithm under both static and dynamic operation conditions show a considerable accuracy of SoC estimation.
Solid-state transformer (SST)-based ultra-fast charging stations (UFCSs) are emerging as a key technology in next-generation electric vehicle (EV) infrastructure, addressing the growing demand for efficient charging. Unlike traditional line-frequency transformers, SSTs offer higher energy conversion efficiency, smaller size, and better scalability. However, challenges such as control complexity and grid stability remain. This review analyzes existing SST topologies (both classical and new) and control methods, discussing their impact on system performance, and finally, it provides an outlook on future technological trends.
Grid-connected photovoltaic (PV)–battery systems require advanced control to maintain stable operation, efficient energy exchange, and minimal conversion losses under variable generation and load conditions. This study proposes a dual-loop Energy Management System (EMS) integrated with a Hybrid Grey Wolf Optimizer–Particle Swarm Optimization (GWO–PSO) algorithm for coordinated control of a low-voltage PV–battery–grid system (380 V AC, ≈800 V DC bus). The hybrid optimizer was chosen due to the limitations of standalone GWO and PSO methods, which frequently experience slow convergence and local stagnation; the integrated GWO–PSO strategy enhances both exploration and exploitation during the real-time adjustment of PI controller gains. The rapid inner loop effectively balances instantaneous power among the PV, battery, and grid, while the outer optimization loop aims to minimize the ITAE criterion to enhance transient response. Simulation outcomes validate stable DC-bus voltage regulation, quicker transitions between power import and export, and prompt power balance with deviations maintained below 2.5%, signifying reduced converter losses and improved power-sharing efficiency. The battery’s state of charge is sustained within the range of 20–80%, ensuring safe operational conditions. The proposed hybrid EMS offers faster convergence, smoother power regulation, and enhanced dynamic stability compared to standalone metaheuristic controllers, establishing it as an effective and reliable solution for grid-connected PV–battery systems.
Off-grid electric vehicle (EV) charging infrastructure powered by hybrid solar–wind systems address critical adoption barriers in developing countries, where grid unreliability and sparse charging networks constrain transportation electrification. Despite growing research interest, no comprehensive review has systematically synthesized the interplay between hybrid renewable architectures, intelligent energy management strategies, and techno-economic viability specifically for off-grid EV charging in resource-constrained settings. This systematic review applies the PRISMA methodology to analyze 94 peer-reviewed publications (2013–2026), examining system architectures, intelligent control strategies, power electronics, battery storage, and deployment frameworks for standalone hybrid solar–wind EV charging stations. Key findings indicate that hybrid solar–wind configurations achieve 30–50% reductions in battery storage requirements and 15–25% lower levelized cost of energy (LCOE) (USD 0.08–0.15/kWh) compared with single-source systems, driven by diurnal and seasonal resource complementarity. Among intelligent control methods, the two-stage distributionally robust optimization (TSDRO) framework emerges as the most promising for data-scarce environments, outperforming conventional deterministic and stochastic approaches by 10–20% in managing renewable intermittency without requiring precise probability distributions. Wide-bandgap power semiconductors (SiC, GaN) enable 96–98% conversion efficiency, while lithium iron phosphate batteries provide 3000–5000 cycle lifetimes suited to tropical operating conditions. Critical gaps remain with field validation still predominantly simulation based, long-term operational data exceeding 24 months on equipment degradation and climate resilience are scarce, and scalable financing models for developing country contexts require further development. Nigeria is presented as an exemplar deployment context, with transferable insights for sub-Saharan Africa, South Asia, and Southeast Asia.
The world is increasingly turning to renewable energy sources (RES) to address climate change issues and achieve net-zero Carbon emissions. Integrating RES into existing power grids is necessary for sustainability because the unpredictability and irregularity of the RES can affect grid stability and generate power quality issues, which can lead to equipment damage and increase operational costs. As a result, the importance of RES is severely compromised. To tackle these challenges, traditional power systems (TPS) will have to become more innovative. Smart grids use advanced technology such as two-way communication between consumers and service providers, automated control, and real-time monitoring to manage power flow effectively. Inverters are effective tools for solving power quality problems in renewable-powered smart grids. However, their effectiveness depends on the topology, control method and design. This review paper focuses on the role of multilevel inverters (MLIs) in mitigating power quality issues such as voltage sag, swell and Total Harmonics Distortion (THD) in RES-integrated smart grids. The comprehensive review also examines the drawbacks of TPS to understand the importance and necessity of developing a smart power system. Finally, the paper discusses future trends in MLI control technology, addressing power quality problems in smart grid environments.