SRAM cells are widely used to design memory blocks of, e.g., caches, register files, and translation lookaside buffers. Depending on the SRAM application, the design requirements are different. For instance, in space applications, alongside energy efficiency, reliability is a main issue since the system is launched into space with a limited energy budget and stays exposed to high doses of radiation strikes for a long time. The Nwise cell has recently been proposed by the authors of this paper as the first highly reliable radiation hardened SRAM cell designed with 28nm FD-SOI. In this paper, inspired from the Nwise cell, we introduce another highly reliable radiation hardened SRAM cell, the Pwise cell, which is also designed with 28nm FD-SOI technology. Through comprehensive simulations of state-of-the-art cells, we show that both the Nwise and Pwise cells are competitive radiation hardened SRAMs to use in different memory blocks for space applications: 1) Both have the highest level of Single Event Upsets (SEU) tolerance capability for the temperature range deployed in space applications; further, both have the highest level of the tolerance capability to Multi Event Upsets (MEU). 2) Compared with the simulated cells that have comparable tolerance capability, the Nwise cell has low read delay and read power consumption, hence, it can be a good choice for space application cache designs, while the Pwise cell can be a proper candidate for space application register file designs since it has low write and read delay.
AI on spaceborne platforms optimizes operations and increases automation, crucial for satellites with limited downlink capacity. It can ensure that only valuable information is transmitted, minimizing resources spent on unnecessary data, which is especially important in hyperspectral Earth Observation missions, producing large data volumes. Our previous work showed that the 1D-CNN, 1D-Justo-LiuNet, outperformed 2D-CNNs and Vision Transformers for hyperspectral segmentation with an accuracy of 0.93 and 4563 parameters, making our model the best choice for in-orbit deployment. While the state of the art has deployed 1D-CNNs on low-power platforms, such as Unmanned Aerial Vehicles, they have still not been deployed in space before. In this work, we mark the first deployment and testing of a 1D-CNN in a satellite. We implement a C version of the 1D-Justo-LiuNet and, after ground validation, we deploy it on board the HYPSO-1 satellite. We demonstrate in-flight segmentation of hyperspectral images via the 1D-CNN to classify pixels into sea, land, and cloud categories. We show how in-orbit segmentation improves satellite operations, increases automation, and optimizes downlink. We give examples of how in-orbit segmentation addresses mission challenges in HYPSO-1, such as incomplete data reception, incorrect satellite pointing, and cloud cover, helping to decide whether to transmit or discard data on board. An additional CNN autonomously interprets the segmented images, enabling on-board decisions on data downlink.
29 May 2020 in Journal of Signal Processing Systems
Stringent power budgets in battery powered platforms have led to the development of energy saving techniques such as Dynamic Voltage and Frequency scaling (DVFS). For embedded system designers to be able to ripe the benefits of these techniques, support for efficient design space exploration must be available in system level simulators. The advent of the edge computing paradigm, with power constraints in the mW domain, has rendered this even more essential. Without a fast and accurate methodology for architecture simulation and energy estimation, the benefit of new ideas and solutions cannot be evaluated. In this paper, we propose a non-intrusive application controlled DVFS management implementation in the GEM5 simulator, used with GEM5’s system call emulation mode. We also propose a novel architecture independent energy model based on categorization of different measurable workload classes. Our energy model is parametrized and calibrated with power measurements on a SAM4L microcontroller board, containing an ARM Cortex M4 processor. Together with the GEM5 output statistics, the model accurately estimates the total energy consumption of our simulated system. The results from our modified GEM5 simulator are validated with representative signal processing applications. After correction of systematic offset errors, our results deviate with less than 4% compared to measurements from the SAM4L microcontroller. Our contributions in this paper can easily be tailored to other processor models in GEM5 and to future versions of GEM5. It will therefore enable system architects to explore new techniques and compare the improvements relative to existing architectures.
Thread-level and data-level parallel architectures have become the design of choice in many of today’s energy-efficient computing systems. However, these architectures put substantially higher requirements on the memory subsystem than scalar architectures, making memory latency and bandwidth critical in their overall efficiency. Data reuse exploration aims at reducing the pressure on the memory subsystem by exploiting the temporal locality in data accesses. In this paper, we investigate the effects on performance and energy from a data reuse methodology combined with parallelization and vectorization in multi- and many-core processors. As a test case, a full-search motion estimation kernel is evaluated on Intel® CoreTM i7-4700K (Haswell) and i7-2600K (Sandy Bridge) multi-core processors, as well as on an Intel® Xeon PhiTM many-core processor (Knights Landing) with Streaming Single Instruction Multiple Data (SIMD) Extensions (SSE) and Advanced Vector Extensions (AVX) instruction sets. Results using a single-threaded execution on the Haswell and Sandy Bridge systems show that performance and EDP (Energy Delay Product) can be improved through data reuse transformations on the scalar code by a factor of ≈3× and ≈6×, respectively. Compared to scalar code without data reuse optimization, the SSE/AVX2 version achieves ≈10×/17× better performance and ≈92×/307× better EDP, respectively. These results can be improved by 10% to 15% using data reuse techniques. Finally, the most optimized version using data reuse and AVX512 achieves a speedup of ≈35× and an EDP improvement of ≈1192× on the Xeon Phi system. While single-threaded execution serves as a common reference point for all architectures to analyze the effects of data reuse on both scalar and vector codes, scalability with thread count is also discussed in the paper.
Hand held battery powered devices are becoming increasingly complex, with embedded applications that regularly demonstrate very dynamic behavior and requiring advanced functionality. To avoid prohibitively high power consumption, novel techniques are needed to handle the increased dynamicity and complexity, e.g., through use of system scenario based design. In this paper a framework for system scenario resource management is presented and evaluated with the H264/AVC encoder control structure on an EFM32 microcontroller. By using DFS as a system knob, we obtain significant power reductions for different system scenarios occurring dynamically while the application is running. The framework overhead is negligible.