In this Letter, we study the friction between a one-dimensional elastomer and a one-dimensional rigid body having a randomly rough surface. The elastomer is modeled as a simple Kelvin body and the surface as self-affine fractal having a Hurst exponent in the range from 0 to 1. The resulting frictional force as a function of velocity always shows a typical structure: it first increases linearly, achieves a plateau and finally drops to another constant level. The coefficient of friction on the plateau depends only weakly on the normal force. At lower velocities, the coefficient of friction depends on two dimensionless combinations of normal force, sliding velocity, shear modulus, viscosity, rms roughness, rms surface gradient, the linear size of the system, and the Hurst exponent. We discuss the physical nature of different regions of the law of friction and suggest an analytical relation describing the coefficient of friction in a wide range of loading conditions. An important implication of the analytical result is the extension of the well-known “master curve procedure” to the dependencies on the normal force and the size of the system.
The present paper is devoted to a theoretical analysis of sliding friction under the influence of oscillations perpendicular to the sliding plane. In contrast to previous works we analyze the influence of the stiffness of the tribological contact in detail and also consider the case of large oscillation amplitudes at which the contact is lost during a part of the oscillation period, so that the sample starts to “jump”. It is shown that the macroscopic coefficient of friction is a function of only two dimensionless parameters—a dimensionless sliding velocity and dimensionless oscillation amplitude. This function in turn depends on the shape of the contacting bodies. In the present paper, analysis is carried out for two shapes: a flat cylindrical punch and a parabolic shape. Here we consider “stiff systems”, where the contact stiffness is small compared with the stiffness of the system. The role of the system stiffness will be studied in more detail in a separate paper.
In this paper, we study theoretically and experimentally the friction between a rough parabolic or conical profile and a flat elastomer beyond the validity region of Amontons' law. The roughness is assumed to be randomly self-affine with a Hurst exponent H in the range from 0 to 1. We first consider a simple Kelvin body and then generalize the results to media with arbitrary linear rheology. The resulting frictional force as a function of velocity shows the same qualitative behavior as in the case of planar surfaces: it increases monotonically before reaching a plateau. However, the dependencies on normal force, sliding velocity, shear modulus, viscosity, rms roughness, rms surface gradient and the Hurst exponent are different for different macroscopic shapes. We suggest analytical relations describing the coefficient of friction in a wide range of loading conditions and suggest a master curve procedure for the dependence on the normal force. Experimental investigation of friction between a steel ball and a polyurethane rubber for different velocities and normal forces confirms the proposed master curve procedure.
Using the particle-based method of movable cellular automata, we analyze the initiation and propagation of intersonic mode II cracks along a weak interface. We show that the stress concentration in front of the crack tip, which is believed to be the mechanism of acceleration of the crack beyond the speed of shear waves, is due to the formation of an elastic vortex. The vortex develops in front of the crack during the short initial period of crack propagation. It expands and moves away from the crack tip and finally detaches from it. Maximum stress concentration in the vortex is achieved at the moment of detachment of the vortex. The crack can accelerate towards the longitudinal wave speed if the magnitude of shear stresses in the elastic vortex reaches the material shear strength before vortex detachment. We have found that for given material parameters, the condition for the unstable accelerated crack propagation depends only on the ratio of the initial crack length to its width (e.g., due to surface roughness).
The paper is devoted to a qualitative analysis of friction of elastomers from the point of view of scales contributing to the force of friction. We argue that – contrary to widespread opinion – friction between a randomly rough self-affine fractal surface and an elastomer is not a multiscale phenomenon, but is governed mostly by the interplay of only two scales – as a rule the largest and the smallest scales of roughness of the contacting bodies. The hypothesis of two-scale character of elastomer friction is illustrated by computer simulations in the framework of the paradigm of Greenwood, Tabor and Grosch using a simplified one-dimensional model.