Lin Chen

Prof. Dr. Lin Chen

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2016 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
LCLin Chen
Lin Chen
SESherif El-Tawil
Sherif El-Tawil
YXYan Xiao
Yan Xiao
Finite-element simulations were used to investigate the structural demands generated by a truck colliding with a bridge pier. A reduced coupled mass-spring-damper model is proposed to simulate the collision process. The model is calibrated to the simulation data and accounts for key variables, such as truck weight, impact speed, and pier characteristics. Through comparisons to detailed finite-element analysis, the reduced model is shown to be able to reasonably represent the behavior of a set of coupled vehicle–bridge systems. On the basis of the simulation results, an argument is made that a standard design truck can be specified for impact design.

1 May 2016 in Journal of Structural Engineering
Verified
Journal Article
Closed access
LCLin Chen
Lin Chen
YXY. Xiao
Y. Xiao
SES. El-Tawil
S. El-Tawil
An equivalent frame is developed to simulate the effect of a large-size truck colliding with a reinforced-concrete column. The surrogate frame is made of simple steel elements and blocks, representing the major features of a reference truck. Equivalence between the frame and actual truck is achieved by comparing their deformation versus internal energy relationships. The equivalent truck frame is scaled down and used in laboratory tests to study the collision process between trucks and bridge piers, thereby significantly reducing the difficulty and cost of conducting full-scale collision tests while maintaining high fidelity. Using the scaled surrogate frames, three drop-weight impact tests are conducted on circular reinforced-concrete model columns. Test results show that the structural responses of the columns are not only influenced by the impact energy itself but also the impact speed and impactor mass. Finite-element simulations of the collision process are conducted using both the equivalent...

9 September 2020 in Advances in Structural Engineering
Verified
Journal Article
Closed access
PDF file
LCLin Chen
Lin Chen
HWHao Wu
Hao Wu
TLTao Liu
Tao Liu
Although the probability of vehicle collision with bridge piers is relatively low, it may cause the pier to fracture and even the entire bridge to collapse, resulting in casualties and huge economic losses. Therefore, bridge piers should be properly designed against vehicle collision. This paper aims to make a state-of-the-art review of the research on vehicle collision with bridge piers, to summarize the achievements and current limitations in this field, and to give some suggestions for future research. It is organized within a framework of performance-based design, which is divided into four types of problems, that is, hazard analysis, structural analysis, damage analysis, and loss analysis. Studies show that reinforced concrete (RC) piers under vehicle impact generally exhibit three damage modes, that is, local damage, shear damage, and flexural damage. When a large truck hits a pier, the engine and container (cargo) may contribute to a two-stage impact characteristic, which has a great influence on the response and damage of the pier. The vehicular impact (force) models and nonlinear response models of RC members under impact loads have been developed respectively, which can be combined to quickly analyze the nonlinear response of RC piers under vehicle impact. Deformation-based methods should be developed to quantify the damage level of RC piers under different damage modes. Current codes still mainly adopt the equivalent static force design method, but some provisions regarding probabilistic (reliability) analysis have appeared. More attention should be paid to the statistical analysis of roadside crashes and vehicle-related parameters in order to obtain a more realistic probabilistic analysis model, and further establish a performance-based design method for RC piers subjected to vehicle collision.

1 April 2020 in Journal of Structural Engineering
Verified
Journal Article
Closed access
LCLin Chen
Lin Chen
HWHao Wu
Hao Wu
TLTao Liu
Tao Liu
In this study, finite element (FE) simulation is conducted to analyze the dynamic response and damage/failure characteristics of typical three-column reinforced concrete (RC) piers under vehicle collision, taking into account key variables such as vehicular kinetic energy, diameter of piers and hoops, axial compression ratio, foundation depth and engine mass, and others. Based on the simulation results, an improved formula is proposed for calculating the axial force increment of RC piers during impact. An analytical approach for evaluating the shear performance of RC piers under vehicle collision is developed by combining a formerly established truck collision model. Furthermore, a new type of equivalent static force regarding the shear failure of RC piers under vehicle collision is also proposed and used to criticize the effectiveness of the AASHTO code.

1 December 2021 in Journal of Structural Engineering
Verified
Journal Article
Closed access
PDF file
TPTing Peng
Ting Peng
LCLin Chen
Lin Chen
TLTao Liu
Tao Liu
CDCristoforo Demartino
Cristoforo Demartino
JXJinjun Xu
Jinjun Xu
Reinforced concrete (RC) bridge piers of highway viaducts are exposed to the vehicular impact hazard with impact location usually close to the ground (i.e., bottom of the pier), thus resulting in dominant shear damage. Different simplified approaches for the assessment of RC bridge pier performance under impact loads are generally based on equivalent static models. One crucial element for these approaches is the determination of the static shear performances and residual axial capacity. Because of limited experimental results available under these conditions, six half-scale rectangular RC columns with different volumetric reinforcement ratios and axial compressive loads were tested under near-ground lateral loads with monotonic static conditions. Test results indicate a clear major diagonal crack at the bottom of RC columns with an inclination angle of approximately 30° below the point of application of the lateral load, and it eventually slips along the crack surface under axial loads followed by failure (i.e., loss of residual axial capacity). The increase in the volumetric reinforcement ratio significantly improves the shear deformation capacity and shear crack resistance with a slight increase in the shear capacity. The increase in the axial load can also slightly increase the shear capacity of the columns but is accompanied by a reduction in shear deformation capacity. Additionally, prediction performances of three commonly used shear capacity models for the case of RC columns under near-ground lateral loads are investigated. Finally, based on the test results, an existing residual axial capacity model is modified to improve its prediction performance.

19 May 2025 in Engineering Structures
Verified
Journal Article
Closed access
FFFei-Fan Feng
Fei-Fan Feng
LCLin Chen
Lin Chen
DZDai-Jiang Zhou
Dai-Jiang Zhou
TLTao Liu
Tao Liu
DODao-Gang Ou
Dao-Gang Ou
YLYong Lu
Yong Lu