In this study, finite element (FE) simulation is conducted to analyze the dynamic response and damage/failure characteristics of typical three-column reinforced concrete (RC) piers under vehicle collision, taking into account key variables such as vehicular kinetic energy, diameter of piers and hoops, axial compression ratio, foundation depth and engine mass, and others. Based on the simulation results, an improved formula is proposed for calculating the axial force increment of RC piers during impact. An analytical approach for evaluating the shear performance of RC piers under vehicle collision is developed by combining a formerly established truck collision model. Furthermore, a new type of equivalent static force regarding the shear failure of RC piers under vehicle collision is also proposed and used to criticize the effectiveness of the AASHTO code.
This paper presents a numerical study examining the dynamic response and resistance mechanism of reinforced concrete (RC) columns strengthened with or without carbon-fiber-reinforced polymer (CFRP) wraps under lateral impact loading by using the software LS-DYNA. First, the information of eight column models was briefly introduced as part of the laboratory experimental program from the literature. Secondly, finite element (FE) models were established in terms of the geometries of impact tests. Then, a detailed comparison between numerical results and experimental results was made, and FE models showed a relatively high simulation accuracy. Subsequently, a series of parametric analyses were carried out with a focus on the effects of axial compression ratio, the boundary condition at the column top, the layer number of CFRP wraps, and the impact velocity and impact height on the dynamic responses of plain and strengthened columns. The results demonstrated that the CFRP retrofit mechanism was not activated during the initial Stage-I when the impact force rapidly increased to the first peak and then decreased to zero. CFRP strengthening came into play in the second stage, Stage-II, and affected the response of the shear force and moment along the column height, as well as had a great influence on the control of shear damage. The dynamic response of RC columns was more sensitive to the impact velocity than to other parameters, regardless of whether CFRP wrapping was applied. The axial compression ratio would have a different influence on the column failure mode if the impact velocity was varied. The variation in impact height and boundary condition at the column top had little influence on the damage mode of strengthened columns.
17 September 2023 in Developments in the Built Environment
This study proposes a general reduced vehicle model for simulating truck-bridge pier collisions. The model was calibrated using high-fidelity finite element (FE) simulations based on LS-DYNA of three types of trucks (i.e., light, medium, and heavy) impacting with rigid bridge piers. Key parameters influencing the vehicular impact force, such as cross-sectional types and dimensions of piers, truck mass, impact velocity, and impact angle, etc., were systematically examined and included into the reduced model. Based on the FE simulation results, a multi-parameter nonlinear fitting of the parameters of the reduced vehicle model was performed. Finally, the general reduced vehicle model was coupled with elastic piers modelled by beam elements to perform coupled dynamic analysis, and the analysis results were compared with the FE simulation results. The results showed that the truck-pier coupling analysis method based on the above general reduced vehicle model can accurately reproduce at a significantly reduced computational cost the key parameters such as the impact force, pier deflection, cross-sectional bending moment and shear force, etc.