Scalable, low-cost and highly efficient catalysis of oxygen electrocatalytic reactions (ORR/OER) are required for the rapid development of clean and renewable energy conversion/storage technologies. Herein, two types of α-MnO2 nanorods were prepared under hydrothermal treatment at 150 °C for 0.5 h (MnO2-150-0.5) or 120 °C for 12 h (MnO2-120-12), then supported on N-doped ketjenblack carbon (N-KB) as bi-functional ORR/OER catalysts. Their electrocatalytic activities toward ORR and OER were investigated systematically. As a result, MnO2-150-0.5/N-KB displays superior ORR catalytic activity, with much more positive half-wave potential and much larger limiting current density (0.76 V and 6.0 mA cm−2), comparable to those of 20 wt. % Pt/C (0.82 V and 5.10 mA cm−2). MnO2-150-0.5/N-KB also shows high electron transfer number (3.86~3.97) and low yield of peroxides (1–7%) during ORR process in the whole potential range of 0–1.0 V (vs. RHE). Meanwhile, the MnO2-150-0.5/N-KB also exhibits better OER activity with low overpotential, comparable to IrO2/N-KB. The excellent electrocatalytic activity of MnO2-150-0.5/N-KB can be attributed to the synergistic effect, relatively smaller size, higher amount of Mn3+, and low charge transfer resistance. This work offers a new strategy for scalable preparation of more efficient and cost-effective α-MnO2 bi-functional oxygen catalysts.
Traditional noble metal platinum (Pt) is regarded as a bifunctional oxygen catalyst due to its highly catalytic efficiency, but its commercial availability and application is often restricted by high cost. Herein, a cheap and effective catalyst mixed with α-MnO2 and nitrogen-doped Ketjenblack (N-KB) (denoted as MnO2-SM150-0.5) is examined as a potential electrocatalyst in oxygen reduction reactions (ORR) and oxygen evolution reactions (OER). This α-MnO2 is prepared by redox reaction between K2S2O8 and MnSO4 in acid conditions with a facile hydrothermal process (named the SM method). As a result, MnO2-SM150-0.5 exhibits a good catalytic performance for ORR in alkaline solution, and this result is comparable to a Pt/C catalyst. Moreover, this catalyst also shows superior durability and methanol tolerance compared with a Pt/C catalyst. It also displays a discharge voltage (~1.28 V) at a discharge density of 50 mA cm−2 in homemade Al–air batteries that is higher than commercial 20% Pt/C (~1.19 V). The superior electrocatalytic performance of MnO2-SM150-0.5 could be attributed to its higher Mn3+/Mn4+ ratio and the synergistic effect between MnO2 and the nitrogen-doped KB. This study provides a novel strategy for the preparation of an MnO2-based composite electrocatalyst.
MIL-88B(Cr) is a prototypical flexible chromium-based metal-organic framework (MOF), which possesses extremely strong water/thermal stability and excellent “swelling/breathing” ability. However, in previous studies, there have been very few reports on MIL-88B(Cr) due to unclear synthesis details. Here, we found that the pure MIL-88B(Cr) can be facile synthesized through a hydrothermal method with the co-use of nitric acid and acetic acid (molar ratio = 1:15). The obtained MIL-88B(Cr) was sufficiently characterized by diverse techniques to assure its high-level quality. This work emphasizes a future valuable approach to expanding the production of flexible Cr-based MOF.