With the rapid advancement of urbanization, the problem of traffic congestion in cities has become increasingly severe. Effectively managing traffic congestion is crucial for sustainable urban development. Previous studies have indicated that fluid dynamics theory can be applied to address flow problems in transportation, and this article aims to utilize CFD to solve congestion issues in urban road traffic. Firstly, a similarity analysis is conducted between fluids and traffic flow at the theoretical level. By converting parameters, the formula of fluid is derived into the formula of traffic flow, thus demonstrating the feasibility of using CFD in traffic flow research. On this basis, targeting recurrent congestion and non-recurrent congestion scenarios, 2D road fluid domains and constraints are constructed based on the common characteristics of each congestion type area. By using Fluent (2018) software to analyze the flow conditions under different congestion characteristics, the smoothness of fluid motion can be used to find out the problems causing traffic congestion and conduct an analysis to reveal the microscopic mechanism behind congestion formation. For different types of congestion, in order to clarify the effectiveness of congestion mitigation measures, the geometric design of road intersections and diversion measures are discussed in depth. The traffic pressure is analyzed by adjusting the vehicle inlet angle at intersections or controlling the vehicle flow speed. Finally, the optimal design scheme is obtained by comparative analysis. It is concluded that for the roundabout, it is optimal to change the entrance angle to 20°. For the on-ramp merging area, it is optimal to set the ramp entrance as a parallel ramp. For recurrent congestion, it is required to pass at an optimal speed of 30 km/h. Based on the theory of previous studies, this paper further proves that the congestion degree of traffic flow under specific assumptions can be expressed by the pressure of the fluid. It also provides new ideas for optimizing urban road design and solving vehicle traffic congestion problems.
With the advancement of urbanization and the proposal of sustainable development goals, the complexity and vulnerability of urban transportation systems have become increasingly prominent, and their reliability is directly related to the sustainable operation of urban transportation. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on a Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using a Monte Carlo simulation, revealing the impact of different attack strategies on network reliability. Subsequently, the congestion delay index is used as the standard of road section failure, considering the failure distribution and mutual dependence of road sections over time, a cascade failure mechanism is introduced, and a time-varying reliability assessment model based on a DBN is constructed. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the sustainable planning and emergency management of urban traffic systems.
With the rapid advancement of urbanization, the problem of traffic congestion in cities has become increasingly severe. Effectively managing traffic congestion is crucial for sustainable urban development. Previous studies have indicated that fluid dynamics theory can be applied to address flow problems in transportation, and this article aims at utilize CFD to solve congestion issues in urban road traffic. Firstly, a similarity analysis is conducted between fluids and traffic flow at the theoretical level. By converting parameters, the formula of fluid is derived into the formula of traffic flow, thus demonstrating the feasibility of using CFD in traffic flow research. On this basis, targeting recurrent congestion and non-recurrent congestion scenarios, 2D road fluid domains and constraints are constructed based on the common characteristics of each congestion type area. By using Fluent software to analyze the flow conditions under different congestion characteristics, use the smoothness of fluid motion to find out the problems causing traffic congestion and conduct analysis to reveal the microscopic mechanism behind congestion formation. For different types of congestion, in order to clarify the effectiveness of congestion mitigation measures, the geometric design of road intersections and diversion measures are discussed in depth. The traffic pressure is analyzed by adjusting the vehicle inlet angle at intersections or controlling the vehicle flow speed. Finally, the optimal design scheme is obtained by comparative analysis. The work of this article provides new ideas for optimizing urban road design and solving vehicle traffic congestion problems. The optimization measures can effectively reduce the accident rate and improve the efficiency of traffic flow.
With the advancement of urbanization, the complexity and fragility of urban traffic systems are becoming increasingly prominent. The reliability of urban road networks, characterized by their dynamic nature, multi-scale characteristics, and anti-interference capabilities, directly restricts the functional guarantee of urban traffic and the efficiency of emergency response. To address the limitations of existing road network connectivity reliability assessment methods in representing time dynamics and modeling failure correlation, this study proposes a road network reliability assessment method based on Dynamic Bayesian Network (DBN) by constructing a probabilistic reasoning model that integrates cascading failure characteristics. First, the connectivity reliability of the road network under random and targeted attack strategies was evaluated using Monte Carlo Simulation (MCS), revealing the impact of different attack strategies on network reliability. Subsequently, considering the time-dependent failure distribution of road sections and their interdependencies, a cascading failure mechanism was introduced to build a time-varying reliability assessment model based on DBN. The effectiveness of the proposed method was verified through a case study of a partial road network in Dalian. The results show that ignoring cascading effects can significantly overestimate the reliability of the road network, especially during peak traffic hours, where such deviations may mask the real paralysis risks of the network. In contrast, the method proposed in this study fully considers time dynamics and failure correlation, and can better capture the reliability of the road network under various dynamic conditions, providing a scientific basis for the resilience planning and emergency management of urban traffic systems.