Arnold Janssens

Prof. Dr. Arnold Janssens


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2019 in American Journal of Infection Control
Verified
Journal Article
Closed access
EKElisa Van Kenhove
Elisa Van Kenhove
KDKarla Dinne
Karla Dinne
AJArnold Janssens
Arnold Janssens
JLJelle Laverge
Jelle Laverge

31 October 2019 in Journal of Building Physics
Verified
Journal Article
Closed access
PDF file
KCKlaas Calle
Klaas Calle
CCCharlotte Coupillie
Charlotte Coupillie
AJArnold Janssens
Arnold Janssens
NBNathan Van Den Bossche
Nathan Van Den Bossche
The watertightness of solid masonry walls is generally based on the concept of buffering and afterwards drying out the absorbed rainwater. In cavity walls, on the contrary, the air layer provides a capillary break between the inner and outer leafs allowing drainage of rainwater and preventing infiltration to the interior wall surface. For assessing moisture-related risks, heat, air and moisture models have proven to be a valuable tool, but in the case of cavity walls two problems arise: the degree of water infiltration into the cavity is unknown, and no consensus is available on the method that should be used to implement these infiltrations in a simulation. For example, for the existing buildings, it is worthwhile to investigate whether injecting cavity wall insulation induces an increase or decrease in moisture-related pathologies, in contrast to adopting a fixed performance criterion for assessment. However, to complete a thorough analysis of a brick cavity wall, it is first useful to review the hygrothermal behaviour of cavity walls as it has been previously described in the literature. As such, this article provides a summary of experimental water infiltration results for cavity walls as described in the literature, discusses experimental results of four test walls subjected to four test protocols and extracts from these results the water infiltration rate for implementation in heat, air and moisture models. Finally, several methods for implementing the infiltrations in heat, air and moisture simulations are presented and evaluated based on different damage criteria. In general, the new modelling approaches are considered to provide realistic results. Nonetheless, an in situ investigation on whether mortar bridges occur in the cavity due to poor workmanship remains crucial to understanding the hygrothermal response as mortar bridges are found to have a dominant impact on the risk of mould growth at the interior wall surface.

1 May 2013 in Building Research & Information
Verified
Journal Article
Closed access
EHEline Himpe
Eline Himpe
LTLeen Trappers
Leen Trappers
WDWim Debacker
Wim Debacker
MDMarc Delghust
Marc Delghust
JLJelle Laverge
Jelle Laverge
MHMarlies Van Holm
Marlies Van Holm
Most zero-energy concepts focus on a reduction of the non-renewable operational energy use in buildings rather than taking the reduction of their life cycle energy use as a starting point. Nevertheless, the life cycle embodied and end-of-life energy will become more important, especially in buildings with low operational energy. Therefore, the life cycle energy use of a Belgian zero-energy reference house is examined by means of life cycle energy assessment. The influence of design decisions and regulations on the building construction type, the building services, and the performance of the building envelope are investigated. In terms of thermal performance of the building, the results show that the life cycle embodied energy in zero-energy houses with passive or standard thermal performance was not substantially different. From a life cycle energy perspective, passive house requirements are not essential criteria for zero-energy houses in Belgium. On the other hand, large life cycle energy savings were obtained through a proficient selection of all building construction materials and services. For the life cycle embodied energy in building constructions, the best timber frame and masonry houses were equally efficient. Wood pellets and photovoltaic panels were decisive factors in the life cycle embodied energy of building services. Les concepts <> sont axés pour la plupart sur une réduction de l'utilisation de l'énergie d'exploitation non renouvelable dans les bâtiments plutôt que de prendre la réduction de leur consommation d'énergie sur le cycle de vie comme point de départ. Néanmoins, l'énergie grise sur le cycle de vie et l'énergie de fin de vie vont gagner en importance, en particulier dans les bâtiments nécessitant une faible énergie d'exploitation. La consommation d'énergie sur le cycle de vie d'une maison belge «zéro énergie» de référence est donc étudiée au moyen d'un bilan énergétique du cycle de vie. Sont étudiés l'influence des décisions de conception et de la réglementation sur le type de construction du bâtiment, les services au bâtiment, et les performances de l'enveloppe du bâtiment. En termes de performance thermique du bâtiment, les résultats montrent que l'énergie grise sur le cycle de vie n'était pas fondamentalement différente dans les maisons «zéro énergie» offrant des performances thermiques passives ou standard. Du point de vue de l'énergie du cycle de vie, les exigences d'une maison passive ne sont pas des critères essentiels pour des maisons «zéro énergie» en Belgique. En revanche, d'importantes économies d'énergie sur le cycle de vie ont été obtenues par un choix opéré avec compétence de tous les matériaux de construction et services au bâtiment. S'agissant de l'énergie grise sur le cycle de vie dans la construction de bâtiments, les meilleures maisons, qu'elles aient été à ossature bois ou en maçonnerie, ont été tout aussi performantes. Les granulés de bois et les panneaux photovoltaïques ont été des facteurs décisifs concernant l'énergie grise sur le cycle de vie des services aux bâtiments. Mots clés: services aux bâtiments, énergie grise, analyse énergétique du cycle de vie, [construction] passive, bâtiments résidentiels, <>

5 May 2015 in Building Research & Information
Verified
Journal Article
Closed access
MDMarc Delghust
Marc Delghust
WRWina Roelens
Wina Roelens
TTTine Tanghe
Tine Tanghe
YWYves De Weerdt
Yves De Weerdt
AJArnold Janssens
Arnold Janssens
How accurately can official energy performance calculations assess the real energy use in high-performance houses? This question was investigated by analysing 537 dwellings. Data on building characteristics and calculated performance from the Flemish Energy Performance of Buildings (EPB) database were complemented with data from energy utilities and surveys of inhabitants, their socio-demographic characteristics and user behaviours. While the real and theoretical energy uses were strongly correlated, the official calculation method overestimated the heating energy use of most houses while neglecting important electricity end uses. The prediction error varied strongly between individual cases. Two options within the calculation procedure had a significant impact on these prediction errors: the use of default values for the air tightness of the building envelope and the reported return temperature of the space heating system. The simplified calculation of net domestic hot water consumption and the real heating of the master bedrooms also affected prediction accuracy. However, extrapolations are hazardous due to the risk of selection and non-response biases implied by the approach and the need for further research into the causalities. Nonetheless, the findings stress the importance of accurate input data and realistic default values for calculation models used for high-performance buildings.

31 August 2022 in Building Research & Information
Verified
Journal Article
Closed access
MHMatthias Van Hove
Matthias Van Hove
MDM. Deurinck
M. Deurinck
WLW. Lameire
W. Lameire
JLJ. Laverge
J. Laverge
AJArnold Janssens
Arnold Janssens
MDM. Delghust
M. Delghust
Large-scale statistical studies on the gap between the real and regulatory energy use in residential buildings in Europe have shown that the regulatory calculation overestimated the real energy use, inflated true energy savings and undermined national energy policy making. Using data from 122,680 Flemish existing single-family houses, this research builds further on existing studies by contributing results for Flanders. The study also examines to what extent available aggregated variables explain the real annual total building energy use using statistical linear models and addresses the problem of multicollinearity and the importance of bootstrapped confidence intervals for model quality control. The overestimation of the real total energy use (and potential energy savings) by the Flemish regulatory method is exceedingly large compared to studies from other EU countries. The Flemish labels prove very poor indicators of the real energy use. Statistical linear models explain up to 46.6% of all variability and indicate that a significant extent of multicollinearity had to be corrected. Half of the variability has been left unexplained and has to be attributed to variables that were not available and the fact that the data were insufficiently accurate. Future analysis will explore whether more complex models identify more evidence.

24 June 2021 in Journal of Building Performance Simulation
Verified
Journal Article
Closed access
SVSilke Verbruggen
Silke Verbruggen
MDMarc Delghust
Marc Delghust
JLJelle Laverge
Jelle Laverge
AJArnold Janssens
Arnold Janssens
Most of the window use models developed for building energy simulations include physical environmental variables as drivers. Even though it is a common approach to include these variables, the validity of this approach can be questioned based on observations in the literature regarding the consistency and seasonality of the relationship between these variables and the window use. Additionally, it was questioned whether this approach could capture the inter-occupant diversity. To assess the extent of the uncertainties, modelling methods from the literature were applied to a case study. The results revealed that a large share of the variance in window use can be attributed to the season and the household-ID. This indicates that the window use varied across the year but was stable within one season, and that these behaviours differed significantly between households. Thus occupants interacted with windows according to seasonal habits, more so then according to momentaneous environmental conditions.