The increasing adoption of distributed recycling via additive manufacturing (DRAM) has facilitated the revalorization of materials derived from waste streams for additive manufacturing. Recycled materials frequently contain impurities and mixed polymers, which can degrade their properties over multiple cycles. This degradation, particularly in rheological properties, limits their applicability in 3D printing. Consequently, there is a critical need for a tool that enables the rapid assessment of the flowability of these recycled materials. This study presents the design, development, and manufacturing of an open-source melt flow index (MFI) apparatus. The open-source MFI was validated with tests on virgin polylactic acid pellets, shredded recycled poly(ethylene) terephthalate glycol flakes, and high-density polyethylene/poly(ethylene) terephthalate blends to demonstrate the range of polymer types and recyclability. The proposed MFI tool offers a user-friendly and cost-effective solution for evaluating the flow properties of materials from waste streams, thereby enhancing their viability for additive manufacturing applications.
The increasing adoption of distributed recycling via additive manufacturing (DRAM) has facilitated the revalorization of materials derived from waste streams for additive manufacturing. Recycled materials frequently contain impurities and mixed polymers, which can degrade their properties over multiple cycles. This degradation, particularly in rheological properties, limits their applicability in 3D printing. Consequently, there is a critical need for a tool that enables rapid assessment of the flowability of these recycled materials. This study presents the design, development, and manufacturing of an open-source melt flow index (MFI) apparatus. The proposed MFI tool offers a user-friendly and cost-effective solution for evaluating the flow properties of materials from waste streams, thereby enhancing their viability for additive manufacturing applications.
Although the economic importance of optimizing lighting systems and energy use in indoor farming is well known, there is a notable lack of studies focusing on economic trade-off analysis between agrivoltaic and grid-powered solutions integrated into light map analysis and revenue sensitivity assessments. To address this gap, this study investigates an indoor true vertical lettuce agrotunnel. Regional, seasonal, and market type sensitivity analyses were carried out on the prices and experimental yields to calculate the revenue from lettuce production. Technoeconomic analysis indicated that agrivoltaics outperformed the grid-only power supply by net present cost and levelized cost of electricity reductions of 13.2% and 44.2%, respectively. Photosynthetic photon flux density (PPFD) and daily light integral (DLI) were compared for the cases of 41–61 cm distances between the lights and the walls. With the 20 cm distance variations, 16.6–17.8% changes in the average PPFD were achievable without increasing energy consumption. In addition, annual revenue from lettuce green mix packs ranged from $61,735 to $86,164 USD for singles and from $83,603 to $116,685 USD for multiple plants per pot strategies, depending on the variety packs. Luxury and mid-range price categories kept the return on investment above 10% at all capital cost levels. The agrotunnel achieved the maximum specific yield of >70 kg/m2/year.