In this study, 10 ferroconcrete concrete (FC) beams with lightweight cores reinforced with welded steel mesh as a shear reinforcement were evaluated under three-point bending tests along with two conventionally normal-weight concrete (NWC) beams. Expanded polystyrene and lightweight aerated autoclaved brick wastes were used to create lightweight core concrete. The main factors include the type of lightweight concrete used for the core, beam concrete type, the form and number of holes, the existing steel mesh fabric, the hollow, and the hole placement. This study was done on the tested beams' ductility index, failure modes, first cracking loads and associated deflections, and ultimate loads besides corresponding deflections. Experimental results showed that the use of FC, various filling materials, and welded steel meshes in place of traditional stirrups enhanced the ultimate load by 36.6–107.3%, the ultimate deflection by 6–272%, and the ductility by 89–1155% when referenced to a control NWC beam. When the holing ratio increased from 10 to 20%, the ductility of FC beams was enhanced by 307.7%. Proposed equations were developed to predict the ultimate load and bending moment capacity of FC beams while taking into account the compressive strength of the beam body and filling material, the holing ratio, the tensile reinforcement ratio, and the volume fraction of the steel mesh.

Wind turbine technology has developed tremendously over the past years. In Egypt, the Zafarana wind farm is currently generating at a capacity of 517 MW, making it one of the largest onshore wind farms in the world. It is located in an active seismic zone along the west side of the Gulf of Suez. Accordingly, seismic risk assessment is demanded for studying the structural integrity of wind towers under expected seismic hazard events. In the context of ongoing joint Egypt–US research project “Seismic Risk Assessment of Wind Turbine Towers in Zafarana wind Farm Egypt” (Project ID: 4588), this paper describes the dynamic performance investigation of an existing Nordex N43 wind turbine tower. Both experimental and numerical work are illustrated explaining the methodology adopted to investigate the dynamic behavior of the tower under seismic load. Field dynamic testing of the full-scale tower was performed using ambient vibration techniques (AVT). Both frequency domain and time domain methods were utilized to identify the actual dynamic properties of the tower as built in the site. Mainly, the natural frequencies, their corresponding mode shapes and damping ratios of the tower were successfully identified using AVT. A vibration-based finite element model (FEM) was constructed using ANSYS V.12 software. The numerical and experimental results of modal analysis were both compared for matching purpose. Using different simulation considerations, the initial FEM was updated to finally match the experimental results with good agreement. Using the final updated FEM, the response of the tower under the AQABA earthquake excitation was investigated. Time history analysis was conducted to define the seismic response of the tower in terms of the structural stresses and displacements. This work is considered as one of the pioneer structural studies of the wind turbine towers in Egypt. Identification of the actual dynamic properties of the existing tower was successfully performed based on AVT. Using advanced techniques in both the field testing and the numerical investigations produced reliable FEM specific for the tested tower, which can be further used in more advanced structural investigations for improving the design of such special structures.