Serhii Berezovetskyi

Prof. Serhii Berezovetskyi

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KHKostiantyn E Holenko
Kostiantyn E Holenko
ODOleksandr Dykha
Oleksandr Dykha
Eugeniusz KodaEugeniusz Koda
Eugeniusz Koda
IKIvan Kernytskyy
Ivan Kernytskyy
OHOrest Horbai
Orest Horbai
HBHydayatullah Bayat
Hydayatullah Bayat
Taking into account the requirements to reduce the release of harmful emissions into the environment, the EU’s environmental standards when transitioning to the Euro 7 standard in 2025 will actually lead vehicles having to operate without producing emissions in all driving situations. Carmakers believe that the new, much stricter regulations will mark the end of the internal combustion engine era. For example, in 2030, the manufacturer SEAT will cease its activities, leaving behind the Cupra brand, which will be exclusively electric in the future. This trend will apply not only to private vehicles (passenger cars), but also to utility vehicles, which is the subject of our research, namely the spatial tubular frame in the Bogdan ERCV27 garbage truck, presented in the form of a solid model. The peculiarity of the studied model is the installation of a battery block behind the driver’s cabin, causing an additional load to be placed on the spatial frame of the garbage truck, which in terms of its architecture is more like the body of a bus. During the conditions involving various modes of operation of a full-scale Bogdan ERCV27 garbage truck sample, questions about the strength and uniformity of its load-bearing spatial frame inevitably arise, which are decisive, even at the stage of designing and preparing the technical documentation. The main static load mode, which, despite its name, also covers dynamic conditions, was modeled using the appropriate coefficient kd = 2.0. The maximum stresses on the model during the “bending” mode were 381.13 MPa before structure optimization and 270.5 MPa as a result of the improvement measures. The spatial frame mass was reduced by 4.13%. During the “torsion” mode, the maximum deformation values were 12.1–14.5 mm, which guarantees the normal operation of the aggregates and units of the truck.

21 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KHKostiantyn E Holenko
Kostiantyn E Holenko
ODOleksandr Dykha
Oleksandr Dykha
Eugeniusz KodaEugeniusz Koda
Eugeniusz Koda
IKIvan Kernytskyy
Ivan Kernytskyy
OHOrest Horbai
Orest Horbai
Anna MarkiewiczAnna Markiewicz
Anna Markiewicz
The problem of the conversion of diesel buses to electric ones in connection with the inevitable introduction of the EURO 7 emission standards entails an automatic requirement to follow several additional United Nations Economic Commission for Europe rules, like R100 regulations. They regulate the preservation of battery units at longitudinal 12 g and transverse 10 g accelerations without penetrating into the elements of the bus body. Three models (12 modes in total) of battery units with frames made of S235 steel were analysed. The maximum stress value varies between 364.89 MPa and 439.08 MPa in 10 g and 12 g modes, respectively, which is beyond the tensile strength (360 MPa) and provokes plastic deformations. The max deformations were recorded in the models with the highest average stress: 63.04 mm in the 12 g mode with an average stress of 83.18 MPa. The minimum deformations of 6.95 and 7.95 mm were found in the 10 g modes (left and right acceleration direction, respectively), which meet the manufacturer’s requirements (45–50 mm maximum). The study’s primary contribution lies in developing a practical method for assessing battery unit integrity and structural behaviour during the conversion of diesel buses to electric propulsion, fully compliant with R100 regulations. By combining transient structural simulation, mathematical centre modelling of acceleration propagation, and centre of gravity prediction, the proposed approach enables engineers to evaluate electric conversions’ safety and certification feasibility without modifying the existing bus body.

21 March 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KHKostiantyn E Holenko
Kostiantyn E Holenko
Eugeniusz KodaEugeniusz Koda
Eugeniusz Koda
ODOleksandr Dykha
Oleksandr Dykha
IKIvan Kernytskyy
Ivan Kernytskyy
OHOrest Horbai
Orest Horbai
VRVasyl Rys
Vasyl Rys
Achieving the EU 2030 target of a 30% CO2 reduction requires transitioning intercity buses to CNG- or fuel-cell-driven vehicles, and urban buses to electric vehicles. The increasing mass of roof-mounted energy systems, such as battery packs, creates additional loads on the body frame. This study investigates the integration of a welded handrail system into the bus body frame as an additional load-bearing element. A combined approach based on dynamic modeling and finite element analysis was applied to evaluate the structural body response under the UNECE R100 and R110 regulations. The results demonstrate that the structural concept significantly improves the stress–strain state of the body frame. Maximum roof displacements under 5g loading decreased by 34% for the gas-powered model and by 50% for the electric model, enhancing passive safety by reducing window-rack intrusion. Maximum stress decreased by 20%, shifting the stress state below the ultimate strength of S235 steel and preventing rupture. Uniform strength under vertical loading increased significantly (by 58%) due to a more favorable stress distribution within the structure. Overall, the results indicate that integrating a welded handrail truss into the bus body frame can effectively improve structural stiffness and redistribute loads within the frame.

26 May 2022 in Bulletin of NTU "KhPI". Series: Strategic management, portfolio, program and project management
Verified
Journal Article
Open access
PDF file
PLPavlo Lub
Pavlo Lub
SBSerhii Berezovetskyi
Serhii Berezovetskyi
RPRoman Padyuka
Roman Padyuka
RCRoman Chubyk
Roman Chubyk
The prerequisites for the creation and use of information-analytical systems for support decision-making in crop harvesting projects are revealed. The peculiarities of the projects environment impact on the implementation of winter rape harvesting projects are presented. Emphasis is placed on the importance of timely of works execution in crop harvesting projects, as well as solving tasks on coordination of content (technical equipment of technological processes of stem spraying and combine seed harvesting) and time of work in projects. The importance of the biological processes impact of winter rapeseed ripening and agrometeorological conditions on the time constraints of the technical equipment operation of projects is indicated. It is noted that this impact determines the variability of the timing of the start of work, as well as their duration and affects the functional performance of winter rapeseed harvesting projects. The necessity of taking into account of these features in the statistical simulation model of the technological system projects of rapeseed harvesting is proved. The development and results of the use of information and analytical system to support project management processes are presented. The method of taking into account the impact of the project environment (subject and agrometeorological conditions) on the timing and timeliness of work in harvesting projects is shown. The expediency of simulation models and methods creating of reflecting the probabilistic conditions of the technical equipment of agricultural crops harvesting projects are described. Computer experiments with a simulation model were performed with the initial data on technical equipment (high-clearance sprayer Mekosan Tecnoma Laser4240-30 and CLAAS Mega 360 combine), cultivar and limits of its production area. The peculiarities of the influence of the main components of crop harvesting projects on the indicators of their efficiency are revealed. The simulation was performed for the set limits of the production area of winter rape – 10-500 ha with a stepwise increase of 10 ha. Correlation dependences of functional indicators efficiency of technological systems on volumes of projects works taking into account influence of the project environment are established.

31 July 2025 in Acta Scientiarum Polonorum. Architectura
Verified
Journal Article
Open access
PDF file
IAIvan Aftanaziv
Ivan Aftanaziv
LSLiliya Shevchuk
Liliya Shevchuk
ISInga Svidrak
Inga Svidrak
NKNazarii Kernytskyy
Nazarii Kernytskyy
YRYuriy Royko
Yuriy Royko
IKIvan Kernytskyy
Ivan Kernytskyy
The design of an automobile electromagnetic vibration cavitator created for the cavitation treatment of water-petrol fuel is described. Its use will allow not only saving fuel, but also increasing the completeness of combustion of the water-petrol fuel mixture; in other words, it will contribute to improving the environment. An experimental study of effectiveness of the fuel mixture cavitation treatment was carried out using A95 petrol and distilled water for automobile internal combustion engines. Cavitation treatment of the fuel mixture with a water-to-petrol ratio of 17 to 83% allows for an increase in the savings of expensive petrol by 15‒20% during the operation of engines on flat and downhill roads and in city traffic jams. At the same time, the engine power is reduced by only 6‒7% due to the cavitation treatment.

25 December 2025 in Engineering, Energy, Transport AIC
Verified
Journal Article
Open access
PKPetro Koruniak
Petro Koruniak
INIryna Nishchenko
Iryna Nishchenko
OSOleksii Shvets
Oleksii Shvets
SBSerhii Berezovetskyi
Serhii Berezovetskyi
A large number of elastic couplings are used in mechanical engineering. Couplings with metal elastic elements come with constant and variable stiffness. As part of drives, they can play the role of safety devices in which the elastic element, which is designed to transmit a certain torque, is destroyed during overloads. The development of the design of a safety-compensating coupling and the method for calculating its parameters will make it possible to determine permissible dynamic loads at the design stage. Purpose is to develop a design scheme of a coupling with an elastic metal element with compensation and safety functions and a method for calculating its parameters, which ensures reliable operation without destruction of the elastic element during overload. Using well-known analytical methods for solving statically indeterminate equations, for given structural parameters of the elastic element, dependencies are proposed for determining dynamic loads in straight sections of the spring and possible displacement of the support element. Based on the analysis of literary sources and patent search, variants of design solutions for elastic couplings are proposed. The elastic element of the device is proposed in the form of a closed star-shaped flat spring tangent to the half couplings with its protrusions. New mathematical dependences are obtained for determining dynamic loads in elastic metal elements of safety-compensating couplings. For the adopted coupling sizes, graphical dependences of dynamic loads on the design parameters of the elastic element of the coupling are determined and constructed. The design of the proposed elastic coupling is simple, technologically feasible, and reliable in operation; it can be effectively used in the design of low- and medium-power drives for various mechanisms and machines, ensuring compensation of misalignments, reduction of dynamic loads, and protection of drive components from overload-induced damage while maintaining stable torque transmission.