Heng Wu

Dr. Heng Wu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
KSKun Shao
Kun Shao
HWHeng Wu
Heng Wu
Driven by the global energy transition and the dual carbon goals, developing low-carbon and zero-carbon alternative fuels has become a core issue for sustainable development in the internal combustion engine sector. Ammonia is a promising zero-carbon fuel with broad application prospects. However, its inherent combustion characteristics, including slow flame propagation, high ignition energy, and narrow flammable range, limit its use in internal combustion engines, necessitating the addition of auxiliary fuels. To address this issue, this paper proposes a composite injection technology combining “ammonia duct injection + hydrogen cylinder direct injection.” This technology utilizes highly reactive hydrogen to promote ammonia combustion, compensating for ammonia’s shortcomings and enabling efficient and smooth engine operation. This study, based on bench testing, investigated the effects of hydrogen direct injection timing (180, 170, 160, 150, 140°, 130, 120 °CA BTDC), hydrogen direct injection pressure (4, 5, 6, 7, 8 MPa) on the combustion and emissions of the ammonia–hydrogen engine. Under hydrogen direct injection timing and hydrogen direct injection pressure conditions, the hydrogen mixture ratios are 10%, 20%, 30%, 40%, and 50%, respectively. Test results indicate that hydrogen injection timing that is too early or too late prevents the formation of an optimal hydrogen layered state within the cylinder, leading to prolonged flame development period and CA10-90. The peak HRR also exhibits a trend of first increasing and then decreasing as the hydrogen direct injection timing is delayed. Increasing the hydrogen direct injection pressure to 8 MPa enhances the initial kinetic energy of the hydrogen jet, intensifies the gas flow within the cylinder, and shortens the CA0-10 and CA10-90, respectively. Under five different hydrogen direct injection ratios, the CA10-90 is shortened by 9.71%, 11.44%, 13.29%, 9.09%, and 13.42%, respectively, improving the combustion stability of the ammonia–hydrogen engine.

18 December 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
BHBingfeng Huang
Bingfeng Huang
WHWei Hong
Wei Hong
KSKun Shao
Kun Shao
HWHeng Wu
Heng Wu
With the increasing global concern for environmental protection and sustainable resource utilization, sustainable engine performance has become the focus of research. This study conducts a sensitivity analysis of the key parameters affecting the performance of sustainable engines, aiming to provide a scientific basis for the optimal design and operation of engines to promote the sustainable development of the transportation industry. The performance of an engine is essentially determined by the combustion process, which in turn depends on the fuel characteristics and the work cycle mode suitability of the technical architecture of the engine itself (oil-engine synergy). Currently, there is a lack of theoretical support and means of reference for the sensitivity analysis of the core parameters of oil–engine synergy. Recognizing the problems of unclear methods of defining sensitivity parameters, unclear influence mechanisms, and imperfect model construction, this paper proposes an evaluation method system composed of oil–engine synergistic sensitivity factor determination and quantitative analysis of contribution. The system contains characteristic data acquisition, model construction and research, and sensitivity analysis and application. In this paper, a hierarchical SVM regression model is constructed, with fuel physicochemical characteristics and engine control parameters as input variables, combustion process parameters as an intermediate layer, and diesel engine performance as output parameters. After substituting the characteristic data into the model, the following results were obtained, R2 > 0.9, MSE < 0.014, MAPE < 3.5%, indicating the model has high accuracy. On this basis, a sensitivity analysis was performed using the Sobol sensitivity analysis algorithm. It was concluded that the load parameters had the highest influence on the ID (ignition delay time), combustion duration (CD), and combustion temperature parameters of the combustion elements, reaching 0.24 and above. The influence weight of the main spray strategy was greater than that of the pre-injection strategy. For the sensitivity analysis of the premix ratio, the injection timing, EGR (exhaust gas recirculation) rate, and load have significant influence weights on the premix ratio, while the influence weights of the other parameters are not more than 0.10. In addition, the combustion temperature among the combustion elements has the highest influence weights on the NOx, PM (particulate matter) concentration, and mass, as well as on the BTE (brake thermal efficiency) and BSFC (brake specific fuel consumption). The ID has the highest influence weight on HC and CO at 0.35. Analysis of the influence weights of the index parameters shows that the influence weights of the fuel physicochemical parameters are much lower than those of the engine control parameters, and the influence weights of the fuel CN (cetane number) are about 5% greater than those of the volatility, which is about 3%. From the analysis of the proportion of index parameters, the engine control parameter influence weights are in the following order: load > EGR > injection timing > injection pressure > pre-injection timing> pre-injection ratio.

10 January 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KSKun Shao
Kun Shao
HWHeng Wu
Heng Wu
This paper provides an in-depth analysis of the effects of exhaust gas recirculation (EGR) coupled with injection parameters and cetane number (CN) on the performance of diesel engines. Test results can be obtained that the CN increased, the coupled EGR rate increased, the peak of cylinder pressure (CP) and the heat release rate (HRR) decreased significantly, the combustion duration (CD) shortened by 6.4%, exhibiting a pronounced downward trend. The coupled injection pressure increased, CO and HC emissions increased by 31.6% and 2.7%, the number concentration of Particulate matter(PM) decreased, and the total mass concentration of PM decreased by 50.82%, and the NOx emissions decreased by 45.16%. The increase of CN coupled with the increase of EGR rate, the peak of HRR decreased significantly by 25.3%, Ignition delay time(ID) and CD showed an opposite trend, the coupled injection timing was delayed, CO and HC emissions increased by 72.7% and 66.1%, respectively, while NOx emissions decreased by 76.5%, peak of PM concentration increased, and the total mass concentration of PM increased by 48.65%. As the EGR rate increased, the PM concentration of the fuels increased and then decreased. With the increase of EGR rate, the PM concentration of the fuel showed a trend of first increasing and then decreasing, and the peak corresponded to the particle size shifted to the direction of large particle size. The particle size peak of the PM reached 70–80 nm. The CN = 53.9 fuel has no pre-injection heat release under different EGR conditions, significantly affecting the CP and HRR.

24 August 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
WFWenjie Fan
Wenjie Fan
TYTingting Yu
Tingting Yu
HWHeng Wu
Heng Wu
Carbon pricing has emerged as a central policy tool for addressing climate change and advancing corporate environmental responsibility, yet its impact on firm-level investment and capital allocation remains insufficiently understood, particularly in emerging economies. This study examines whether emissions trading systems (ETS) influence corporate investment behavior and the reallocation of capital, using China as a representative case within the Asia-Pacific region. Employing a panel dataset of 5000 Chinese listed firms (approximately 80,000 firm-year observations) over the 2008–2023 period and a difference-in-differences framework, we identify the causal effect of carbon pricing on corporate investment decisions. The results show that firms exposed to carbon pricing experience a statistically significant reduction in investment following policy implementation. This effect is more pronounced in high-emission industries and operates through declines in profitability and tighter financial conditions. Asset-weighted measures indicate that the adjustment is concentrated among larger firms, and industry-level analysis shows that reductions are disproportionately driven by high-emission sectors. This pattern of heterogeneous investment responses is consistent with carbon pricing influencing investment allocation across firms; however, we do not directly observe the subsequent destination of capital or whether reduced investment in exposed firms is transferred toward cleaner activities. These findings provide new micro-level evidence that carbon markets shape corporate environmental management and real economic decisions by altering firm incentives, cost structures, and expectations. The study contributes to the literature by linking environmental policy tools to firm-level investment behavior and offers practical insights for policymakers and managers navigating the low-carbon transition in emerging economies.

29 May 2026 in Scientific Reports
Verified
Journal Article
Open access
KSKun Shao
Kun Shao
HWHeng Wu
Heng Wu
This study employed three-dimensional numerical simulation methods to investigate the combustion and emission characteristics of three fuels-B0 (pure diesel), B15 (a mixture of 15% n-butanol and 85% diesel), and B30 (a mixture of 30% n-butanol and 70% diesel)-under the coupled effects of different injection pressures and injection timings. The results indicate that an increase in injection pressure significantly improves fuel atomization, promotes the transition to premixed combustion, and shortens the ignition delay time (ID) and combustion duration (CD) by 0.25, 0.51, and 0.73°CA, and 8.13, 8.19, and 8.26°CA, respectively. As injection pressure increased, the indicated thermal efficiency improved by 0.4%, 0.7%, and 1.2%, respectively, but NOx emissions increased by 107.4%, 84.7%, and 63.7%, respectively, while soot emissions showed the opposite trend. Furthermore, injection timing has a significant impact on the combustion atmosphere within the cylinder; delayed injection leads to prolonged ID and CD, adversely affecting indicated thermal efficiency. The study found that the injection timing yielding maximum thermal efficiency for B30 fuel is 9°CA, which is slightly earlier than that for B0 fuel. When the fuel injection timing was delayed from 11°CA BTDC to 3°CA BTDC, NOx emissions for all three fuels showed a decreasing trend to varying degrees, but soot emissions increased by 45.1%, 38.3%, and 35.2%, respectively. It is worth noting that soot emissions from B30 fuel remained at a relatively low level across different injection timings. The results of this study provide a theoretical basis for optimizing the combustion performance and emission control of biodiesel-diesel blends.