Wei Hong

Prof. Wei Hong

professor of Jilin University

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2020 in Energies
Verified
Journal Article
Open access
PDF file
ZJZhaohui Jin
Zhaohui Jin
WHWei Hong
Wei Hong
TYTian You
Tian You
YSYan Su
Yan Su
LXLi Xiaoping
Li Xiaoping
Fangxi XieFangxi Xie
Fangxi Xie
Studies show that the valve lift (VL) of the cam-driven hydraulic variable valve actuation (VVA) can be continuously adjusted in the range of 0–8.2 mm by controlling the opening of the throttling valve. In the present study, an orthogonal experiment with interaction was designed to analyze the effect of multi-factor coupling on the VL, valve-seating velocity (VSV), and pressure fluctuation in the valve piston cavity. In order to reduce the pressure fluctuation, the Taguchi method was applied to find the optimal combination of the key parameters including the diameter of the piston, the spring preload of the valve-seating buffer mechanism (VSBM), the spring preload of the valve, and the valve piston mass. The correctness of the VVA simulation model is verified through experiments. Moreover, the pressure fluctuation is analyzed through a numerical simulation. The obtained results showed that as long as the VSV is less than 0.5 m·s−1, the pressure fluctuations in hydraulic VVA can be reduced by several means, such as increasing the spring stiffness of the VSBM and valve, increasing the valve piston area and diameter size of the thin-walled hole, and reducing the valve piston mass and total hydraulic oil volume.

1 September 2019 in Energies
Verified
Journal Article
Open access
PDF file
YZYou Zhou
You Zhou
WHWei Hong
Wei Hong
YYYe Yang
Ye Yang
LXLi Xiaoping
Li Xiaoping
Fangxi XieFangxi Xie
Fangxi Xie
YZYou Zhou
You Zhou
Increasing compression ratio and using lean burn are two effective techniques for improving engine performance. Methanol has a wide range of sources and is a kind of suitable fuel for a high-compression ratio spark-ignition lean burn engine. Lean burn mainly has a dilution effect, thermal effect and chemical effect. To clarify the influences of different effects and provide guidance for improving composition of dilution gases and applications of this technology, this paper chose Ar, N2 and CO2 as diluents. A spark-ignition methanol engine modified from a diesel engine with a compression ratio of 17.5 was used for the experiments. The results obtained by using methanol spark ignition combustion indicated that at engine speed of 1400 rpm and 25% load, NOx dropped by up to 77.5%, 100% and 100% by Ar, CO2 and N2. Gases with higher specific heat ratio and lower heat capacity represented by Ar exhibited the least adverse effect on combustion and showed a downward break-specific fuel consumption (BSFC) trend. Gas with high specific heat capacity represented by CO2 can decrease NOx and total hydro carbons (THC) emissions at the same time, but the BSFC of CO2 showed the worst trend, followed by N2. Gas affecting the combustion process like CO2 had chemical effect.

18 December 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
BHBingfeng Huang
Bingfeng Huang
WHWei Hong
Wei Hong
KSKun Shao
Kun Shao
HWHeng Wu
Heng Wu
With the increasing global concern for environmental protection and sustainable resource utilization, sustainable engine performance has become the focus of research. This study conducts a sensitivity analysis of the key parameters affecting the performance of sustainable engines, aiming to provide a scientific basis for the optimal design and operation of engines to promote the sustainable development of the transportation industry. The performance of an engine is essentially determined by the combustion process, which in turn depends on the fuel characteristics and the work cycle mode suitability of the technical architecture of the engine itself (oil-engine synergy). Currently, there is a lack of theoretical support and means of reference for the sensitivity analysis of the core parameters of oil–engine synergy. Recognizing the problems of unclear methods of defining sensitivity parameters, unclear influence mechanisms, and imperfect model construction, this paper proposes an evaluation method system composed of oil–engine synergistic sensitivity factor determination and quantitative analysis of contribution. The system contains characteristic data acquisition, model construction and research, and sensitivity analysis and application. In this paper, a hierarchical SVM regression model is constructed, with fuel physicochemical characteristics and engine control parameters as input variables, combustion process parameters as an intermediate layer, and diesel engine performance as output parameters. After substituting the characteristic data into the model, the following results were obtained, R2 > 0.9, MSE < 0.014, MAPE < 3.5%, indicating the model has high accuracy. On this basis, a sensitivity analysis was performed using the Sobol sensitivity analysis algorithm. It was concluded that the load parameters had the highest influence on the ID (ignition delay time), combustion duration (CD), and combustion temperature parameters of the combustion elements, reaching 0.24 and above. The influence weight of the main spray strategy was greater than that of the pre-injection strategy. For the sensitivity analysis of the premix ratio, the injection timing, EGR (exhaust gas recirculation) rate, and load have significant influence weights on the premix ratio, while the influence weights of the other parameters are not more than 0.10. In addition, the combustion temperature among the combustion elements has the highest influence weights on the NOx, PM (particulate matter) concentration, and mass, as well as on the BTE (brake thermal efficiency) and BSFC (brake specific fuel consumption). The ID has the highest influence weight on HC and CO at 0.35. Analysis of the influence weights of the index parameters shows that the influence weights of the fuel physicochemical parameters are much lower than those of the engine control parameters, and the influence weights of the fuel CN (cetane number) are about 5% greater than those of the volatility, which is about 3%. From the analysis of the proportion of index parameters, the engine control parameter influence weights are in the following order: load > EGR > injection timing > injection pressure > pre-injection timing> pre-injection ratio.

4 December 2020 in Symmetry
Verified
Journal Article
Open access
PDF file
SFShuang Feng
Shuang Feng
WHWei Hong
Wei Hong
Yongming YaoYongming Yao
Yongming Yao
TYTian You
Tian You
Mobile source emissions have already accounted for a large proportion of environmental pollution, which seriously affect the symmetric characteristics of atmosphere, and automobile emissions have extremely serious deterioration of emissions under transient operation, especially particulate emissions. These factors exacerbate the asymmetry of the environment. So, the paper reports an experiment about the improvement of post injection strategy on combustion, regulated emissions (HC, CO, and NOx), and particle number emissions especially the emissions of different size particles in the transient process of an EGR diesel engine, meanwhile, the effects of post injection on the combustion of mixture are further analyzed by numerical simulation method. The test speed was 1600 r/min, and the torque increased from 5% of the maximum torque to 100%. The results indicated that the shorter the instantaneous loading time, the more severe the deterioration of particulate emissions, HC and CO emissions, but loading time has little effect on NOx emissions. The particles with the size range of 50–100 nm, 23–50 nm, and >100 nm are greatly affected by the loading process and post injection. In comparison, it has little effect on ultrafine particles with particle size of 15–23 nm and 100 nm particles, the peak number concentration can be reduced by 25% and 50%, respectively. Due to the turbo charging lag, the peak of NOx emissions during the unloading process were slightly larger than the loading process.

31 December 2011 in Procedia Environmental Sciences
Verified
Journal Article
Open access
JYJie Yun
Jie Yun
XHXiangyang Han
Xiangyang Han
WHWei Hong
Wei Hong
Based on the YD4A75-C3 electronically controlled common rail diesel engine, combined with the theory of Bosch forth total axial variable nozzles common rail fuel injection system, a research was made on the double-layers arrangement of nozzles’ the influence on the fuel-gas mixing and combustion process in cylinder by using commercial CFD software FIRE. The research result showed properly using double-layers arrangement of nozzles could enlarge fuel's diffusion space; improve fuel-air mixing quality, making combustion more sufficiently. As a result, the NO emissions increased while Soot decreased obviously.