Scarcity of pure drinking water during the dry season (November–March) is a major problem in Bangladesh, which needs to be addressed. This crisis has been further aggravated due to surging populations. Rainwater can provide some of the cleanest naturally occurring water and can hold a great potential in dealing with the current challenge of acute arsenic poisoning as well as physical water scarcity in many parts of Bangladesh. In this connection, rainwater harvesting (RWH) system has been constructed in a very remote and rural village in Khulna, Bangladesh, for a 4-membered household. It consists of a concrete catchment of 40 m2 area, a supporting and collection system made of PVC pipes, and two locally available plastic storage tanks having capacity of 2000 L each. The study also investigates the quality aspects of the stored rainwater, which include measurement of pH, alkalinity, hardness, total dissolved solids (TDS), iron, chloride, nitrate, and turbidity, using standard methods. The results showed that not only the quality of harvested rainwater is good but also the amount of water is enough for a 4-membered household to meet its domestic use throughout the year.
Finding sustainable alternative energy resources and treating wastewater are the two most important issues that need to be solved. Microbial fuel cell (MFC) technology has demonstrated a tremendous potential in bioelectricity generation with wastewater treatment. Since wastewater can be used as a source of electrolyte for the MFC, the salient point of this study was to investigate the effect of pH on bioelectricity production using various biomass feed (wastewater and river water) as the anolyte in a dual-chambered MFC. Maximum extents of power density (1459.02mW·m−2), current density (1288.9mA·m−2), and voltage (1132mV) were obtained at pH 8 by using Bhairab river water as a feedstock in the MFC. A substantial extent of chemical oxygen demand (COD) removal (94) as well as coulombic efficiency (41.7) was also achieved in the same chamber at pH 8. The overall performance of the MFC, in terms of bioelectricity generation, COD removal, and coulombic efficiency, indicates a plausible utilization of the MFC for wastewater treatment as well as bioelectricity production.
Powdered form of bones of silver carp fish, an available species in Bangladesh, was investigated as a prominent bioadsorbent for the removal of Congo red from synthetic solution. Experiments were conducted in batch process, and a number of influencing parameters, such as solution pH, adsorbent dosage, contact time, and initial Congo red concentration, were thoroughly investigated for optimization. Kinetic and equilibrium data were well described by pseudo-second-order model and Langmuir isotherm, respectively. Suitability of pseudo-second-order model to best fit with the adsorption process was corroborated by squared sum of errors analysis. Mass transfer mechanism was confirmed by intraparticle pore diffusion and Banghams diffusion models. Maximum sorption capacity of fish bone powder was found to be 666.67mg·g−1. The optimum condition (adsorbent dose: 5g·L−1; pH: 2.0; operating time: 4h) for maximum sorption was determined as well. The increasing negative value of Gibbs free energy (ΔG) with temperature rise indicated spontaneous nature and feasibility of adsorption. The positive values of ΔH and ΔS suggested that the adsorption reaction is endothermic and random (at the solid/liquid interface) in nature. The activation energy (29.84kJ·mol−1) indicated that the sorption process was of physisorption type. A considerably high adsorption capacity pointed towards utilization of this apparently useless biomaterial as an effective adsorbent.
Sawdust is a waste material, which is generally produced during making furniture and other necessary wood products. With a view to utilizing this waste material, a biosorbent was prepared from mahogany (Swietenia macrophylla) sawdust through simple chemical treatment and was used to remove nickel ion (Ni2+) from an aqueous solution. The adsorbent material was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The effects of biosorbent dosage (218g/L), pH of the tested solution (410.5), contact time (up to 360min), and temperature (298318K) were studied in batchwise experiments. The maximum adsorption capacity of the treated sawdust was determined to be 13.42mg/g at an optimum condition (sorbent dose of 15g/L, pH of 9, and temperature of 298K). The experimental data extrapolation revealed that the adsorption process fitted the Langmuir isotherm model and the kinetics was a pseudo-second-order kinetic model. The obtained thermodynamic parameters indicated that the adsorption reaction was spontaneous, endothermic, and random in nature. The study revealed that sawdust biosorbent has potential adsorption efficiency for nickel ion removal from an aqueous solution.