Sawdust is a waste material, which is generally produced during making furniture and other necessary wood products. With a view to utilizing this waste material, a biosorbent was prepared from mahogany (Swietenia macrophylla) sawdust through simple chemical treatment and was used to remove nickel ion (Ni2+) from an aqueous solution. The adsorbent material was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The effects of biosorbent dosage (218g/L), pH of the tested solution (410.5), contact time (up to 360min), and temperature (298318K) were studied in batchwise experiments. The maximum adsorption capacity of the treated sawdust was determined to be 13.42mg/g at an optimum condition (sorbent dose of 15g/L, pH of 9, and temperature of 298K). The experimental data extrapolation revealed that the adsorption process fitted the Langmuir isotherm model and the kinetics was a pseudo-second-order kinetic model. The obtained thermodynamic parameters indicated that the adsorption reaction was spontaneous, endothermic, and random in nature. The study revealed that sawdust biosorbent has potential adsorption efficiency for nickel ion removal from an aqueous solution.
Rice husk ash (RHA), is a widely available biobased source for high purity silica. In this work, zeolite Faujasite (FAU) is synthesized using extracted silica from RHA (collected from a local region of Bangladesh). The synthesized zeolite FAU was used as an adsorbent for Cr(VI) and Pb (II) batch-wise adsorptive removal from respective aqueous solution. The synthesized zeolite FAU was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen-sorption, and Fourier transfer infrared (FT-IR) spectroscopy. Metal ion adsorption studies were performed by varying metal concentration (20–100 mg/L for Cr(VI) and 900–133 mg/L for Pb(II)), sorbent dosage (2–10 g/L for chromium and 0.5–1.5 g/L for lead), and contact time (10–120 min for both metal ions). The maximum adsorption capacity of RHA-based zeolite FAU was found to be 3.56 mg/g and 342.16 mg/g for Cr(VI) and Pb(II), respectively. Since the sorption data was found to match with Langmuir isotherm, a monolayer adsorption was occurred. The regeneration of the RHA-based zeolite FAU by NaCl solution showed the potential of repeated as well as continuous operation.
1 November 2018 in Microporous and Mesoporous Materials