We present optical, electrical, and structural properties of nitrogen-doped graphene grown on the Si face of 4H-SiC (0001) by chemical vapor deposition method using propane as the carbon precursor and N2 as the nitrogen source. The incorporation of nitrogen in the carbon lattice was confirmed by X-ray photoelectron spectroscopy. Angle-resolved photoemission spectroscopy shows carrier behavior characteristic for massless Dirac fermions and confirms the presence of a graphene monolayer in the investigated nitrogen-doped samples. The structural and electronic properties of the material were investigated by Raman spectroscopy. A systematical analysis of the graphene Raman spectra, including D, G, and 2D bands, was performed. In the case of nitrogen-doped samples, an electron concentration on the order of 5–10 × 1012 cm−2 was estimated based upon Raman and Hall effect measurements and no clear dependence of the carrier concentration on nitrogen concentration used during growth was observed. This high electron concentration can be interpreted as both due to the presence of nitrogen in graphitic-like positions of the graphene lattice as well as to the interaction with the substrate. A greater intensity of the Raman D band and increased inhomogeneity, as well as decreased electron mobility, observed for nitrogen-doped samples, indicate the formation of defects and a modification of the growth process induced by nitrogen doping.
Van der Waals heterostructures (vdWHSs) provide a unique playground to study fundamental physics and practical applications of two-dimensional (2D) materials. However, most 2D heterostructures are prepared by transfer, hindering their technological implementation. Here, we report the first chemical vapour deposition of monolayered MoS2/WS2/graphene vertical vdWHS without transfer step. By atomic force microscopy, photoluminescence, Raman spectroscopy, and secondary ion mass spectroscopy, we confirmed the vertical stacking of three different 2D materials. The use of WS2, graphene, and sapphire as growth substrates allowed us to describe the 2D materials growth process better. We determined that for the synthesis of 2D materials, only the chemical potential of the crystal formation and the substrate-layer adhesion energy are relevant factors. In addition, we used MoS2/WS2/graphene vdWHS to fabricate a photoresponsive memory device, showing the application potential of such heterostacks. Our results clarify the growth mechanisms of 2D materials and pave the way for the growth of more complex vdWHSs.
Graphene flow sensors not only hold great prospects for applications but also encounter many difficulties, such as unwanted electrochemical phenomena, low measurable signal, and limited dependence on the flow direction. This study proposes an approach allowing for the detection of a flow direction-dependent electric signal in aqueous solutions of salts, acids, and bases. The key element in the proposed solution is the use of a reference electrode which allows external gating of the graphene structure. Using external gating enables to enhance substantially the amplitude of the flow-generated signal. Simultaneous measurement of the reference electrode current allows us to recover a flow-direction-sensitive component of the flow-induced voltage in graphene. The obtained results are discussed in terms of the Coulomb interaction and other phenomena, which can be present at the interface of graphene with the aqueous solution.
In this paper, we report the growth of high-quality strain-balanced quantum cascade lasers (QCLs) in the low-pressure MOCVD production type multi-wafer planetary reactor addressing, in particular, quality and scaled manufacturing issues. Special attention was given to achieving the sharp interfaces (IFs), by optimizing the growth interruptions time and time of exposure of InAlAs layer to oxygen contamination in the reactor, which all result in extremely narrow IFs width, below 0.5 nm. The lasers were designed for emission at m. The active region was based on diagonal two-phonon resonance design with 40 cascade stages. For epitaxial process control, the High Resolution X-Ray Diffraction (HR XRD) and Transmission Electron Microscopy (TEM) were used to characterize the structural quality of the QCL samples. The grown structures were processed into mesa Fabry-Perot lasers using dry etching RIE ICP processing technology. The basic electro-optical characterization of the lasers is provided. We also present results of Green’s function modeling of QCLs and demonstrate the capability of non-equilibrium Green’s function (NEGF) approach for sophisticated, but still computationally effective simulation of laser’s characteristics. The sharpness of the grown IFs was confirmed by direct measurements of their chemical profiles and as well as the agreement between experimental and calculated wavelength obtained for the bandstructure with ideally abrupt (non-graded) IFs.
The structure of magnetoresistance curves as a function of magnetic field from 0 to 14 T at temperatures from 0.4 to 6.0 K for macroscopic samples of the quasi-free-standing (QFS) graphene monolayer on SiC substrate, are observed and analyzed, and also the spatial and depth frequency distribution of phonons have been measured using the micro-Raman spectroscopy (MRS). That one enables us to interpret the obtained resonance magnetoresistance curves based on the electron-phonon (e-p) interaction taking into account the actually observed phonon spectrum in researched samples: in the case of a linear e-p interaction the observation of the corresponding peaks on the curves is difficult because an uninterrupted background is created. While nonlinear MPR with simultaneous G-phonon emission and D-phonon absorption occur in magnetic fields below 5 T against the background of MPR due to linear e-p interaction as well as Shubnikov–de Haas oscillations.
Although the behavior of silicon (Si) in gallium arsenide (GaAs) has been extensively studied, a comprehensive understanding of compensation mechanisms and defect dynamics remains an active area of research. Moreover, a methodological gap persists between atomic-scale defect identification and quantitative depth profiling across technologically relevant device architectures. In this study, we investigated a GaAs/GaAs:Si/GaAs multilayer structure grown by metalorganic vapor phase epitaxy, along with calibration samples of varying silicon concentrations, using a combined approach of Ultra Low Impact Energy Secondary Ion Mass Spectrometry (SIMS) and Electrochemical Capacitance–Voltage profiling. To our knowledge, this work provides the first quantitative depth profiles of individual silicon-related defects—including SiGa, SiAs, SiGa–SiAs pairs, and SiGaVGa complexes—with subnanometer resolution. Polyatomic species specific to these defects were identified, enabling SIMS signals to be linked directly to carrier concentration. A calibration strategy integrating a material-specific defect model with experimental profiles was developed, unlocking quantification of defect distributions solely based on SIMS data. Post-growth annealing (800–1000 °C) revealed defects, redistribution, and diffusion behavior, allowing the extraction of diffusion parameters for SiGa and Si pairs species. Our findings establish a quantitative framework for disentangling the individual contributions of silicon-based defects to compensation effects in GaAs:Si.