Based on the extracted resistance, inductance, capacitance, and conductance parameters, this paper introduces the distributed transmission line model of silicon-core coaxial through-silicon vias (CTSVs), in which the vertical interconnect is made of a Cu-coated silicon pole. The proposed model is validated against a commercial electromagnetic simulation tool, showing it is highly accurate up to 100 GHz. Using the proposed model, the impact of various material properties and physical parameters on the electrical performance of the silicon-core CTSVs is investigated. It is observed that the thickness of the plated Cu and isolation dielectric are two important parameters that determine the electrical performance of silicon-core CTSVs. Performance comparison shows that the proposed silicon-core CTSVs provide a comparable performance to standard Cu-based CTSVs and better performance to the conventional signal-ground TSV pairs. The results in this paper would provide some design guides for silicon-core CTSVs in 3-D integration.
21 June 2018 in IEEE Journal of the Electron Devices Society
Due to low dielectric loss and low cost, glass is developed as a promising material for advanced interposers in 2.5D and 3D integration. In this study, through glass vias (TGVs) are used to implement inductors for minimal footprint and large quality factor. Based on the proposed physical structure, the impact of various process and design parameters on the electrical characteristics of TGV inductors is investigated with 3D electromagnetic simulator HFSS. It is observed that TGV inductors have identical inductance and larger quality factor in comparison with their through silicon via (TSV) counterparts. Using TGV inductors and parallel plate capacitors, a compact 3-D band-pass filter (BPF) is designed and analyzed. Compared with some reported BPFs, the proposed TGV-based circuit has an ultra-compact size and excellent filtering performance.
10 July 2020 in IEEE Microwave and Wireless Components Letters
Mutual inductance is an important parameter for the design and optimization of the wireless power transfer (WPT) system. In this letter, a compact analytical model for mutual inductance of two coupled planar coil is proposed. The model is derived from Neumann's integral of constant current-carrying filament with a Taylor expansion approach. It can predict mutual inductance at various lateral and angular misalignments. The analytical results show a good agreement with the 3-D electromagnetic simulation results, and the maximum error for the mutual inductance remains less than 15.1%. An experimental setup has been built, and the results reveal the proposed model can predict the mutual coupling rapidly and effectively.
22 April 2019 in IEEE Transactions on Nanotechnology
A novel silicon-based hybrid plasmonic waveguide for nano-scale optical confinement and long range propagation at λ=1.55 μm has been proposed in this paper. This structure is based on a silicon-on-insulator rib and its top is with a metal cap. Through introducing a ridge on the top of the silicon layer, it can improve the performance of the confinement and the loss significantly. Further parameter studies are carried out by using FEM method and the numerical results show that this design has lower loss (propagation length over 200 μm) and better confinement (effective mode area below 0.05) as compared with the traditional hybrid ones. Additionally, further extension and discussion of the width restriction and fabrication error are also taken into account for real application in the last part of this paper. Our design may serve as a potential choice for various nano-photonic components, especially for plasmonic waveguide design.
3 May 2023 in IEEE Transactions on Antennas and Propagation
A wideband millimeter-wave (mmWave) circularly polarized (CP) complementary antenna array is proposed herein for radio-frequency energy harvesting (RFEH) applications. The element is constructed of a CP magneto-electric (ME) dipole antenna and innovatively introduces the complementary source technique to improve the CP radiation performance. Detailed analyses are provided to elaborate the operating principles of the element. Simulated results for the element reveal an impedance bandwidth of 25.7%, a 3-dB axial ratio (AR) bandwidth of 24.8%, and a gain of 8.7 ± 1.6 dBic over the spectrum. The element shows stable radiation pattern and wide AR/impedance overlapping bandwidth (33.87–43.15 GHz) for RFEH applications covering the 35, 37, and 39 GHz bands. To enhance the gain for practical applications, the element is employed in the design, fabrication, and testing of a planar 4 × 4 array fed by a full-corporate substrate-integrated waveguide (SIW) network. Measured results indicate that the array achieves an impedance bandwidth of 20.2%, a 3-dB AR bandwidth of 24.3%, and a 3-dB gain bandwidth of 22.8%. The proposed array thus features a low profile and excellent performance, which makes it a desirable candidate for mmWave RFEH applications.
8 January 2021 in IEEE Transactions on Electromagnetic Compatibility
A hybrid time-domain numerical method based on the full wave finite-difference time-domain (FDTD) method combined with a modified 1-D FDTD method has been proposed to analyze the electromagnetic interference (EMI) of multiscale transmission line networks in a metallic cabin in this article. This method is implemented through two numerical solvers for full wave and transmission line simulations, respectively, by adopting a set of reasonable physical boundary conditions between external fields and transmission line network. By using Ampere's law, the external fields can be transferred to a voltage source that can be further used as the forcing terms in the telegraph equation of the transmission line network. To overcome the challenge introduced by the multiscale size of the transmission line network, we combine 1-D explicit and implicit FDTD methods together to solve the coaxial cables and interconnects in PCB, respectively. Thus, among different subdomains, the hybrid method can be carried with the same time step without the restriction of the stability condition. Numerical examples show the accuracy as well as efficiency of the proposed method compared with the HSPICE and traditional FDTD method. In addition, the method is used successfully in analyzing the EMI effects of a complex transmission line network inside a cabin illuminated by external electromagnetic wave.