Peri-implant bone loss and bone quality significantly affect the biomechanical stability and long-term success of dental implants. This study used finite element analysis to evaluate the stress distribution and deformation behavior of implants and alveolar bone according to bone loss (0–5 mm) and bone quality (normal and low). A finite element model was implemented based on a three-dimensional mandibular model. The mechanical properties of each component were assigned, and finite element analysis was performed using a static occlusal load. The results showed that progressive bone loss increased von Mises stresses in the implant fixture and surrounding bone, and low-quality bone showed a significant vulnerability to stress concentration. The 2 mm bone loss model showed the maximum stress in cortical bone, and from 3 mm onwards, the stress decreased due to extensive loss of cortical bone. This may be because extensive bone loss causes the implant to lose interface with cortical bone and contact only with cancellous bone. This study confirmed that bone loss and the vulnerability of bone quality may potentially affect implant failure. Continued research is needed to suggest customized implants based on the structural vulnerability of alveolar bone.
The biomechanical effects of dental tissue according to various dental crown materials were investigated using finite element analysis. Bone, prepared tooth, root canal, and periodontal ligament were modeled based on computed tomography. Depending on the characteristics of the crown material, it was classified into zirconia, hybrid ceramic, gold alloy, and acrylic resin. A loading force of 200 N was applied in the vertical direction to the occlusal surface of the crown, and analysis was performed under the condition that all interfaces were tied. The results demonstrate that the highest von Mises stress was shown in the prepared tooth of the acrylic resin model, which is a temporary prosthesis, and the pulpal pressure was also the highest. Additionally, among the final prosthesis, the highest stress was shown in the hybrid ceramic model prepared teeth. The properties of restoration materials can be a factor influencing the tooth structure. Thus, in order to make a correct decision when selecting a material for restorative treatment, it is necessary to understand, analyze, and evaluate the properties of these restoration materials.
Peri-implant bone loss and bone quality significantly affect the biomechanical stability and long-term success of dental implants. This study used finite element analysis to evaluate the stress distribution and deformation behavior of implants and alveolar bone according to bone loss (0–5 mm) and bone quality (normal and low). A finite element model was implemented based on a three-dimensional mandibular model. The mechanical properties of each component were assigned, and finite element analysis was performed using a static occlusal load. Results showed that progressive bone loss increased von Mises stresses in the implant fixture and surrounding bone, and low quality bone showed a significant vulnerability to stress concentration. The 2 mm bone loss model showed the maximum stress in cortical bone, and from 3 mm onwards, the stress decreased due to extensive loss of cortical bone. This may be because extensive bone loss causes the implant to lose interface with cortical bone and contact only with cancellous bone. This study confirmed that bone loss and the vulnerability of bone quality may potentially affect implant failure. Continued research is needed to suggest customized implants based on the structural vulnerability of alveolar bone.