South America—in particular, the Andean countries—are exposed to high levels of seismic hazard, which, when combined with the elevated concentration of population and properties, has led to an alarming potential for human and economic losses. Although several fragility models have been developed in recent decades for South America, and occasionally used in probabilistic risk analysis, these models have been developed using distinct methodologies and assumptions, which renders any direct comparison of the results across countries questionable, and thus application at a regional level unreliable. This publication aims at obtaining a uniform fragility model for the most representative building classes in the Andean region, for large‐scale risk analysis. To this end, sets of single‐degree‐of‐freedom oscillators were created and subjected to a series of ground motion records using nonlinear time history analyses, and the resulting damage distributions were used to derive sets of fragility functions.

This study presents an open and transparent exposure model for the residential building stock in South America. This model captures the geographical distribution, structural characteristics (including information about construction materials, lateral load resisting system, range of number of stories), average built‐up area, replacement cost, expected number of occupants, and number of dwellings and buildings. The methodology utilized to develop this model was based on national population and housing statistics and expert judgment from dozens of local researchers and practitioners. This model has been developed as part of the South America Risk Assessment (SARA) project led by the Global Earthquake Model (GEM), and it can be used to perform earthquake risk analyses. It is available at different geographical scales for seven Andean countries: Argentina, Bolivia, Chile, Colombia, Ecuador, Peru, and Venezuela (DOI: 10.13117/GEM. DATASET.EXP.ANDEAN‐v1.0).

Recent earthquakes have produced extensive damage in a large number of existing masonry buildings, demonstrating the need for retrofitting masonry structures. Externally bonded carbon fiber is a retrofitting technique that has been used to increase the strength of reinforced concrete elements. Sixteen full-scale shear dominant clay brick masonry walls, six with wire-steel shear reinforcement, were retrofitted with two configurations of externally bonded carbon fiber strips and subjected to shear loading. The results of the experimental program showed that the strength of the walls could be increased 13–84%, whereas, their displacement capacity increased 51–146%. This paper presents an analysis of the experimental results and simple equations to estimate the cracking load and the maximum shear strength of clay brick masonry walls, retrofitted with carbon fiber.