The design of ladle furnace (LF) refining pathways for weathering steels requires precise control of multi-component steel/slag reactions governed simultaneously by thermodynamics and interfacial mass transfer kinetics. An EERZ-based kinetic modeling strategy was employed using the Thermo-Calc® (version 2022a) Process Metallurgy Module and the CALPHAD TCOX11 database to develop LF refining schedules capable of upgrading conventional S355J2R steel to weathering steel grades: S355J2W and S355J2WP. First, the sensitivity of predicted compositions to key kinetic inputs was quantified. The validated model was then used to simulate deoxidation and desulfurization sequences, predicting the evolution of liquid–steel and slag compositions, slag basicity, and FeO activity throughout the LF cycle. Subsequently, Cr- and P-ferroalloys were introduced to design tap-to-tap schedules that meet the EN 10025-5 chemical specifications for S355J2W and S355J2WP. To correlate simulation outcomes with material performance, plates produced following the modeled schedules were evaluated through a 1000 h accelerated salt spray test. Steel density and steel phase mass transfer coefficients were found to produce the highest prediction sensitivity (up to 7.5 wt.% variation in C and S), whereas slag phase parameters exhibited a lower impact. The predicted steel compositions showed strong agreement with industrial values obtained during plant trials. SEM-EDS analyses confirmed the development of a Cr-enriched protective patina and validated model-based alloying strategies.
This study aims to provide insights into the experimental conditions used during the melting/casting process and subsequent thermal treatments of low-alloy steels, particularly regarding recycled scrap metals. As sustainable practices in metallurgy gain importance, optimizing scrap metal recycling is crucial for producing steel grades with desired chemical compositions, microstructures, and physical properties. Understanding these conditions is vital for enhancing the efficiency and quality of steel production from recycled materials. This study emphasizes the critical role of specific experimental conditions in the steelmaking process, especially with recycled scrap metals. It closely examines the atmosphere during melting/casting to identify key parameters that must be rigorously controlled in lab-scale steel production using a vacuum induction furnace. The findings indicate that both the chemical composition and recyclability of low-alloyed steels are significantly influenced by the surrounding atmosphere during melting and casting. Inert environments, such as vacuum or argon, are shown to be ideal for steelmaking with induction technology, particularly when recycling scrap metals. Additionally, this study highlights the importance of precise heat treatments, including homogenization and normalization, by controlling both thermal conditions and the atmosphere to produce high-quality steel from recycled scraps.