AbstractThe rapid introduction of electric vehicles (EVs) in the transportation market has initiated the concept of vehicle-to-grid (V2G) technology in smart grids. However, where V2G technology is intended to facilitate the power grid ancillary services, it could also have an adverse effect on the aging of battery packs in EVs. This is due to the instant depletion of power during the charge and discharge cycles, which could eventually impact the structural complexity and electrochemical operations in the battery pack. To address this situation, a median expectation-based regression approach is proposed for parameter estimation of vehicle batteries in V2G systems. The proposed method is built on the property of uncertainty prediction of Gaussian processes for parameter estimation while considering the cell variations as an exogenous function. Firstly, a median expectation-based Gaussian process model is derived to predict the fused and individual cell variations of a battery pack. Secondly, a magnitude-squared coherence model is developed by the error matrix to detect and isolate each variation. This is obtained by extracting the cross-spectral densities for the measurements. The proposed regression-based approach is evaluated using experimental measurements collected from lithium-ion (Li-ion) battery pack in EVs. The parametric analysis of the battery pack has been verified using D-SAT Chroma 8000ATS hardware platform.
The efficiency of a photovoltaic (PV) panels drops significantly in dusty environments. The variation in temperature could have a substantial impact on PV panel cells, which could further lead to high deterioration and eventually permanent damage to the PV material in the presence of dust. To resolve this issue, in this work a novel hydrophobic silicon dioxide (SiO2)-based nanoparticle coating is proposed for the PV panel, to shrink the surface stress developed between the water and the coated facet. Two identical PV modules were installed to conduct comparable experimental tests simultaneously. The first module is coated by the SiO2 nanoparticles, and the second is uncoated and used as a reference. To maintain coherency, the experiments are done in the same environmental conditions, cleaning the PV modules at regular intervals. Results reveal that the accumulated energy generated during this period of study was comprehensively enhanced. Moreover, the self-cleaning property of the hydrophobic surface of the coated panel allowed water droplets to slide smoothly down the PV module surface, carrying dust particles. Useful recommendations are made at the end to enhance the performance of PV panels in dusty environments.
The integration of photovoltaic (PV) systems into DC motor drives has prompted the enhancement of motor performance. This study explores the application of photovoltaic generators (PVs) to independently power and excite a Separately Excited Direct-Current (SEDC) system by utilizing a proportional open-circuit voltage method as a strategy for tracking the maximum power point. This approach offers an effective means of optimizing energy output from PV systems. The primary aim was to optimize power output from photovoltaic generators across varying solar intensity levels. This paper describes the nonlinear current/voltage behaviour of PV generators under different levels of irradiation, along with the magnetic characteristics of the core material in an SEDC motor, utilizing advanced polynomial equations for accurate mathematical representation. Furthermore, we conducted a dynamic analysis of the SEDC motor, powered by the PV generators, under varying solar intensities. This study investigates the operational performance of the SEDC motor under varying solar irradiance levels by developing a realistic model using MATLAB software, R2022a, for numerical simulations, followed by implementation on high-performance computing platforms, including a real-time simulator and testbed, using a real-time digital simulator (RTDS).