The efficiency of a photovoltaic (PV) panels drops significantly in dusty environments. The variation in temperature could have a substantial impact on PV panel cells, which could further lead to high deterioration and eventually permanent damage to the PV material in the presence of dust. To resolve this issue, in this work a novel hydrophobic silicon dioxide (SiO2)-based nanoparticle coating is proposed for the PV panel, to shrink the surface stress developed between the water and the coated facet. Two identical PV modules were installed to conduct comparable experimental tests simultaneously. The first module is coated by the SiO2 nanoparticles, and the second is uncoated and used as a reference. To maintain coherency, the experiments are done in the same environmental conditions, cleaning the PV modules at regular intervals. Results reveal that the accumulated energy generated during this period of study was comprehensively enhanced. Moreover, the self-cleaning property of the hydrophobic surface of the coated panel allowed water droplets to slide smoothly down the PV module surface, carrying dust particles. Useful recommendations are made at the end to enhance the performance of PV panels in dusty environments.
An energy audit (EA) is a crucial step in boosting factory energy efficiency and obtaining certification for cleaner manufacturing. The results of a preliminary energy audit carried out at a sizable industrial facility in Jordan that creates some of the most well-known foods in the Middle East are presented in this study. The monthly demand of the factory for diesel ranged from 75,251.545 to 166,666.67 L. The factory energy model which is used to examine the impact of various energy-saving practices on the factory's primary energy consumption, was developed with the help of the energy audit. It has been established that optimizing the factory's energy use and the boiler systems' performance with regards to diesel consumption can withstand an expected monthly financial savings of 14205.85 Jordanian Dinar (JD). This has allowed a reduction in energy use of up to 18%. The CO2 harmful emissions were also decreased. Additionally, it is estimated that switching from the proposed motors to energy-efficient motors will cost less overall over time, saving around 3472.314 JD/month or 0.33576/year on average. Moreover, it was discovered that a total of 772.82021 Ton CO2/year emissions may be avoided each year.
The integration of photovoltaic (PV) systems into DC motor drives has prompted the enhancement of motor performance. This study explores the application of photovoltaic generators (PVs) to independently power and excite a Separately Excited Direct-Current (SEDC) system by utilizing a proportional open-circuit voltage method as a strategy for tracking the maximum power point. This approach offers an effective means of optimizing energy output from PV systems. The primary aim was to optimize power output from photovoltaic generators across varying solar intensity levels. This paper describes the nonlinear current/voltage behaviour of PV generators under different levels of irradiation, along with the magnetic characteristics of the core material in an SEDC motor, utilizing advanced polynomial equations for accurate mathematical representation. Furthermore, we conducted a dynamic analysis of the SEDC motor, powered by the PV generators, under varying solar intensities. This study investigates the operational performance of the SEDC motor under varying solar irradiance levels by developing a realistic model using MATLAB software, R2022a, for numerical simulations, followed by implementation on high-performance computing platforms, including a real-time simulator and testbed, using a real-time digital simulator (RTDS).
1 January 2025 in International Transactions on Electrical Energy Systems
This research offers a hands‐on examination of using Jordan’s naturally abundant, high‐purity Wadi Rum silica sand (SiO 2 > 99%) as an affordable material for thermal energy storage (TES) in concentrated solar power (CSP) systems aimed at home‐scale applications. During the 3 days of continuous testing, the setup achieved a peak heat transfer rate of 18.7 kW, heating water by 27°C, reaching a top outlet temperature of 54.9°C. The silica sand proved to be an effective thermal reservoir, attaining internal temperatures between 67°C and 69°C. On average, the system produced 11.2 kWh of thermal energy per day, with an overall efficiency of 50.2%, while cutting daily CO 2 emissions by about 2.07 kg. The economic assessment showed a payback time of just 1.49 years, which reduced to 1.04 years with a 30% subsidy. Altogether, the findings confirm that Wadi Rum silica sand offers a practical, sustainable, and financially attractive pathway for thermal storage, directly advancing Jordan’s drive toward a cleaner and more self‐reliant energy future.